Untitled

[smartcamproblems-blog]

Firmware Update for Linksys RE7000

Updating the firmware is an important task it helps to fix bugs and enhance the performance of the Linksys RE7000.To upgrade the firmware for the Linksys RE7000 follow the steps mentioned below by visiting on the page HTTP //extender.linksys.com setup. Updation of firmware is an important task which needs to perform time to time to improve the performance and functionality of the device.

 Step 1:-Access web page setup of Linksys RE7000 device.

Step 2:-Under the administration click on the Firmware upgrade on the web-based setup page.

Step 3:-Her you will found two options to update the firmware. Click on the method which you want to adopt.

 Automatic update

Manual update.

 Automatic updating:-

                                       The device will automatically detect the firmware is available for updating and update itself. Here is an option by which you have to log in and go to the firmware upgrade page which will force to the system for check the availability of new firmware for updating on the page HTTP //extender.linksys.com setup. Click on the update now button if there is a new version of firmware available and displayed by the system for an update.

Note:-Here is you will found an option for update the firmware automatically. Click on it if you want to firmware auto update.

 Manual update:-

                                 To manually update the firmware select the file which you have downloaded for updating and open the file.laptop wifi signal suddenly weak

 Step 1:-Click on save option.

Step 2:-Click on the option start the upgrade and wait until the upgrade process is not finished.While it is upgrading do not power cycle the Linksys RE7000 device.

 Now you have successfully updated the firmware for the device. Make sure the device should not be disconnected from the power while updating the firmware or during whole the process, It will lead to malfunctioning of the system which may disturb the upgrading process of the device.

[smartcamproblems-blog]

Netgear AC1200-WiFi Range Extender Cannot Join a WiFi Network

Some time your Netgear AC1200-WiFi Range extender cannot join a Network and showing the errors while you try to connect it. Some times to join a network you must know its network name so that you can connect it. You must know the key or passphrase if the network is safe. You can further check the points mentioned below if the extender cannot connect to the network which you have select to connect. The cause of cannot connecting might be one from the mentioned below which can be checked on Netgear wifi range extender login.

Cause 1:-

              Check the network name, key, passphrase twice. It may be chances that you entering the wrong one from them. The passphrase is the case sensitive and it should be written as it is as you make it. If it makes small letters then you have to write in small letters only, if you have made in big letters then you have to write in big letters only. Use the smart setup to select the WiFi network available and enter the key or passphrase.

Cause 2:-

                  If extender cannot detect the network then check the network it is working properly or not by visiting on Netgear wifi range extender login. Make sure the wifi router turned on. If possible move the extender near to the router.

Cause 3:-

                 If the LED of the extender device flashes in red color that means the connection between router and extender is poor. A good connection can be established between the extender and the router by making a clear line of sight in between the router and extender. You have to make sure that there should not be any physical obstacles exists in between the extender and WiFi router and try to place the extender near to the router.netgear nighthawk vdsl/adsl modem router.

You can go through all these settings and try to remove these causes.

[smartcamproblems-blog]

Network Map Tool for Linksys Smart Wifi

Network Map tool:-The tolls which allow you to monitor and manage devices which are connected to the network. You will be able to see the connected devices which are online and offline. You can find the devices either "By Devices" or "By Connection type."You can visit on page HTTP my router local to find the tool.

 To locate the Network Map. Access the web-based setup page for your router. Click it under Smart Wifi Tools, Click network Map. You will find here two categories in the Network Map section which are my network and Guest network.

Hereby clicking on dropdown menu you can view the devices by the group. Categories which find are listed below.

1. Computer

2. Mobile

3. Printer

4. Other devices.

Connection type categories are

1. Offline devices

2. Local area network/Wired devices

3. Wireless devices which connected to 2.5 GHz frequency

4. Wireless devices which connected to 5 GHz frequency

To check the details about the device you can click on the device by visiting on HTTP my router local and you will get all the details about device such as manufacturer, Model, OS, Addresses, and Mac addresses.

Monitoring usages of the internet by the Network:-

                                                                                    The network map tool also allows you to check the internet bandwidth used by each device connected to the router. To view this section click on to the Internet Usage option from the menu. The following are the options which you can monitor in this tool

1. Total Bandwidth:-It displays the total data rate or bandwidth consumption.

2. Transmit:-Displays the uploaded data

3. Receive;-It displays the downloaded data.

Adding more devices to the network:-

                                                                         The network map tool allows for adding more devices to the network. To connect more devices you can click on the "Add Device" button and click on the device which you want to add to the network. Options which are available to add are

1. COMPUTER

2. WPS

3. USB PRINTERS

4. OTHERS

[smartcamproblems-blog]

NBN network introductions for Net gear wifi router

The NBN is a short form of National Broadband Network. It is an initiative which is taken as a way to improve landline phones and Internet networks so that you can access fast and reliable internet services. This initiative is taken by the government of Australia to improve internet services throughout the country. You can find the suitable network for your router by visiting on page www router login net Net gear. To deliver the better services the NBN offers this type of connection which is mentioned here

1. Fiber to the Premises and Fiber to the Home:-

                                                                                  From internet services provider to your home an optic fiber cable is run either underground or using overhead techniques. In this service typically uses a port with Gigabit Ethernet in the wall or a fiber modem to which you connect your device.review for linksys ea8300 max stream

2. Fiber to the Node and Fibre to the Basement:-

                                                                                        In this method there is a mixture of existing copper wires and the optic fiber is used to connect the internet. Optic fiber is used to deliver the connection from the node to the neighborhood.From there existing copper wiring is used to deliver the internet up to your home. For fiber to home service optic fiber used to deliver the internet up to the basement then further the copper cables used to deliver up to homes.

3. Hybrid Fiber-Coaxial:-

                                           In this method, there is a combination of fiber and coaxial cabling to deliver the internet through the TV networking cable.A customer is provided with a cable modem or gateway to connect to the internet.

4. Fixed wireless:-

                              It is used the fiber optic cable to connect them to a cellular transmission tower. Then through the tower, it transmits the broadband service to your home using the TD-LTE broadband technology.netgear trek pr2000 wifi extender setup  steps.

5. Satellite:-

                     In this process, it uses a special type of satellite in space to transmit the signal to a home satellite dish to provide you the high-speed broadband internet. Details of the compatible routers available on the page page www router login net Net gear

[smartcamproblems-blog]

Handle Motion Sensitivity for Net gear Arlo

Arlo camera records the videos whenever any motion is detected within the range of camera. You can easily manage the motion sensitivity for the devices. If you want that the camera should not capture the videos which you do not want to capture then you can easily configure the motion sensitivity of your devices by visiting on page arlo login Netgear.

The motion sensitivity for each camera sets on the 80.If the camera works effectively by adjusting on different setting. Then you can change the setting by use of arlo app to change it and adjust the camera to change the location of capturing the video within the range of camera.some key features of netgear arlo ultra.

You can handle the sensitivity for the motion for the arlo camera devices.

1. Click on the Arlo app icon from your home screen by visiting arlo login Net gear.

2. Log in with the username and password for the device and click on the next.

3. After click on the mode option you will get the list of installed devices which are installs in your locations.

4. Here from the list select the camera for which you want to handle the motion sensitivity issues.

5. You need to select edit button just with mode that is displaying on the screen if you want to change the mode.

6. Tap or click on the rule which you want to modify on the motion detection setting page displays.

7. Here you have to note the motion sensitivity settings. Don not selects the armed mode here.

8. Then return back to the mode page.

9. Next to smart thing mode tap or click on the edit. The editing page will display here.

10. Click on edit next to rule that you want to edit.

11. Under the next motion is detected tap on edit here.

12. Here the motion detection settings page display.

13. Set the motion sensitivity level to match the match the settings.

[smartcamproblems-blog]

How to change wireless settings for Linksys extender?

Linksys wifi extender devices will boost wifi signals from your network and then you can connect more wireless devices to Linksys extender network. You can get settings for your Linksys extender using Linksys ac1200 WiFi range extender setup page and then you can change wireless settings for your extender.

How to Handle Wireless Settings for Linksys Extender Devices?

1.     Connect Linksys AC1200 wifi extender to laptop using Ethernet cable.

2.     Provide power supply to your wifi extender and laptop.

3.     Access Linksys wifi AC1200 extender login page. Use http:// extender.linksys.com to address bar.

4.     Fill Linksys wifi extender login user name and password. Max stream ac 1900 extender review.

5.     Click on “Wireless” button from the setup page.

6.     After that click on “Basic Wireless Settings” option.

7.     Choose “Manual” option from your computer window. Using radio button you can choose manual option for your device.

8.     Choose the security mode for your Linksys wifi extender device. you must not ignore this steps because when you do not select accurate security for your Linksys wifi extender device, you can’t have better security for your devices.

9.     Fill password for Linksys ac1200 WiFi range extender setup and then click on “Save” button for saving settings.

10.                    If you want you can change the encryption settings for your Linksys wifi extender device.

These are steps so that you can change the wireless settings for your Linksys wifi extender device. we know that all these steps are very simple but if you can’t make these steps then you can read other articles and then reconfigure your device settings. You can download the user manual from Linksys website and read your device setting instructions from this user manual.

[smartcamproblems-blog]

Setup static IP for play station 4

Port forwarding settings are must for your Linksys devices when you need to send and receive packets to particular node. When you open ports for your network, you can make sure that your device will receive data packets easily. Using extender.Linksys setup page you can easily make the play station 4 settings for your device.

Complete Steps to Make Static IP Settings for Play Station 4

1.     Access search console for Linksys wifi extender device. some users also feel problem accessing login for Linksys wifi extender device. in this case you can contact Linksys support team for help. See all those possible reasons why your laptop signal is getting weak.

2.     Click on “Settings” button. From the settings tab you can make all advance wireless settings for your Linksys wifi extender.  

3.     After that you can select “Network” button.

4.     You can then click on “Setup Internet Connection” button and select “Use LAN Cable” option.

5.     Click on “Easy” button.

6.     You can make manual settings for the IP address settings.

7.     After that you can click on “MTU Settings” button. MTU is “Maximum Transmission Unit” that is the size of the data packets that you are sending and receiving at your network.

8.     Select “Automatic” button.

9.     Click on “Save” button and your settings are saved for these static IP address.

These are steps for configuring static IP address settings for your Linksys wifi extender device. These settings can also damage your device performance and if you also face performance problems with your devices then better you can reset your device to all default settings.        

[smartcamproblems-blog]

Back Up and Manage Netgear WN2000RPT wifi extender

if you have Netgear WN2000RPT wifi extender device installed for your home then we are sure that you are having high speed wifi connections for your wireless computer devices. When you use these wifi extender devices, you can connect many computer devices to wifi access. if you are getting slow internet connections or your device is not configured accurately then you can access the mywifiext net setup page of your device and reset your device to default settings.

 When you reset your Netgear device to default settings, you can get best settings for your device once again. When you reconfigure Netgear wifi extender devices from the setup page, make sure that you can update your device after few months. See the best procedure here for setting up of the AirCard hotspot mobile with Netgear Universal wifi range extender.

 How to Backup and Reset Netgear WN2000RPT wifi extender Device

 1.     Access login page of your device.

2.     Using mywifiext net setup web address you can access the setup page of your device.

3.     Fill Netgear WN2000RPT wifi extender login user name and password.

4.     Click on “Backup” button from the setup page.

5.     Select the location for storing your Netgear WN2000RPT wifi extender’s backup.

6.     You can then reset your device to all default settings and for that you can find the reset button from your device.

7.     Press the reset button of your device for few seconds and your device will get reset to default settings.

8.     If you want to get these backup for your wifi extender device then you can click on “Browse” button from the same page and then select the backup/

9.     Your device will have same settings.

 These are steps so that you can reset and backup Netgear WN2000RPT wifi extender devices from a computer device. browser other articles of our website and you will get more details for your troubleshooting your device.  

[smartcamproblems-blog]

Linksys EA2700 N600 Dual-Band Wi-Fi Router Explained

Linksys users always feel so lucky because they get best wifi services using these Linksys devices. When you also use Linksys devices for your home, you will easily able to enjoy wifi connections for your computer and other advance devices. When you need to choose any Linksys wifi router device for your home, you can surely go for Linksys EA2700 N600 Dual-Band Wi-Fi Router device and all features of this router device is explained here in this article.

 All Details of Linksys EA2700 N600 Dual-Band Wi-Fi Router Device  

 1.     Send and receive wifi data at very high speed using these devices.

2.     Antennas are internal for these router devices that are why these log into Linksys router devices looks very stylish.

3.     You will not feel any kind of network interfaces with these devices.

4.     When you choose these Linksys EA2700 N600 Dual-Band Wi-Fi Router devices for your network, you will find Gigabit ports with these devices. You can get very high speed Ethernet connections using this port. Look for the static IP setup using the Linksys smart wifi account.

5.     You can access your router settings from any location if you can create a new account for Linksys smart wifi.

6.     You can make some basic settings for your device like parental controls, bandwidth controls and MTU settings using log into Linksys router page.

7.     WPA2 security settings are possible for these devices so that you can secure all your data packets.

8.     All dead zones will be removed from your home because these Linksys EA2700 N600 Dual-Band Wi-Fi Router devices can easily transfer wifi coverage to a long range.

9.     Manage QoS that is quality of services of these wifi router devices and these settings are done from Linksys smart wifi tools window.

 These are all features that you will find with Linksys EA2700 N600 Dual-Band Wi-Fi Router devices.      

[smartcamproblems-blog]

Steps for Changing the wifi Access Password

When you configure very advance Netgear wifi router devices for your network, you will need to configure two most important settings for your devices. These important settings are, one is your wifi access password and second is your network name. Both these important settings are done using routerlogin net brs Netgear success address that is default login address for Netgear router settings.

What is Network Name?

Network name is the default SSID that your wireless computer devices will get when they are connected to Netgear wifi access. You will find this network name at the WiFi tray of your computer device. Here is the best procedure for connecting the Netgear trek pr2000 LED wifi hotspot.

What is WiFi Access password?

Wifi access password is the security PIN that you will need to fill when you want to connect your computer device or mobile to Netgear wifi access. You can change this wifi password any time when you want. Password must have some special characters and special numbers because this will generate a very secure password.  

How to Change WiFi Access Password for Netgear Router Devices?

If you want to secure your wifi access then you can change your wifi password using following steps.

1.     Make login for routerlogin net brs Netgear success address.

2.     Fill Netgear login password and user name to the given fields.

3.     Select “Wireless” button or tab from the setup page.

4.     From there you will get option for changing the default network name for your Netgear wifi router device.

5.     Once password is changed you can click on “Apply” button.

These steps will help you to protect your wifi data and you must choose a very strong password for your network access.  

[smartcamproblems-blog]

Handle Motion Sensitivity for Arlo security cameras

Arlo camera devices can get some settings issues but if you are aware about these Arlo devices then you can easily recover your camera device using my Arlo login page. Sometimes you will find that your Arlo camera device is having motion sensitivity problems. Catch the right steps here for configuring the local backup SD Card storage on Arlo Go cameras.

When any Arlo camera has motion sensitivity problems, you will start receiving mobile messages for each and every motion that your camera device is detecting. These issues become very irritating for most of the Arlo camera users so in this article we are explaining steps for resolving these problems.

Here are Steps to Handle Motion Sensitivity for Arlo Camera Devices

1.     Install Arlo camera application to mobile device. if you do not have mobile device then access http:// arlo.netgear.com web address from your computer’s web browser.

2.     If you have mobile device and you have Arlo application then click on the Arlo application icon.

3.     Fill Arlo login user name and password.

4.     Click on “Mode” button.

5.     There you get the list of the cameras that you have for your network then you can select Arlo camera that you want to troubleshoot.

6.     Click on “Edit” button so that you can edit the rules for your device’s sensitivity.

These are steps to resolve the motion sensitivity issues that you are having with your Arlo camera devices. If you want, you can also select some sensitivity areas at your home and this will be possible from my arlo login page. For example, you can select the motion areas of your garage or your backyard where you children use to play. Base station of Arlo camera device must have accurate settings.    

[smartcamproblems-blog]

Manual Configurations for Linksys WiFi Extender

Linksys wifi extender devices are used so that you can have high speed wifi connections for your computer and other mobile devices. You can very easily configure the manual configurations for Linksys wifi extender device and for that you will need to have access for setup Linksys extender page.

Any computer device can be used to get manual configurations for any Linksys wifi extender devices. You will need to get network name, wireless channel details and wireless password for accessing wifi connections from your router device.

Manual Setup for Linksys WiFi Extender Device

When you are ready with all required things, here are the steps that you will follow

1.     Take LAN cable that is also known as Ethernet cable.

2.     Connect your Linksys wifi extender and computer device together using this LAN cable.

3.     After that provide power supply to your Linksys wifi extender and computer device.

4.     You can then open web browser to this computer and access setup Linksys extender login IP address. You can fill http:// extender.linksys.com web address to the address bar.

5.     Fill Linksys wifi extender login user name and password.

6.     Click on “Wireless” button.

7.     After that you can select “Basic Wireless Settings” button.

8.     Using radio button click on “Manual” button.

9.     Select the security mode for your Linksys wifi extender device.

10.                        Fill password that you know for securing your wifi.

11.                        After that click on “Save Settings” button.

12.                        After that you can configure encryption settings for data packets. These encryption settings will help you to protect the data that you will send and receive using your wifi extender device.

13.                        After that click on “Save” button. See why your laptop wifi signal is getting dropped.

These are steps to make manual settings for your Linksys wifi extender device using your computer.        

[smartcamproblems-blog]

About Linksys smart wifi advance tools

When you have Linksys wifi router device for your wifi connections, you can configure your Linksys wifi router devices using myrouter.local 192.168.1.1 web address. You can access this login page only if your router device is connected to your computer device. See the best procedure for setting the netgear gaming router.

When you want to setup your tplink wifi router device from any remote location, you can easily do this using Linksys smart wifi utility. This is the default web tool that is used so that you can handle your Linksys from any remote location.

How to Access Linksys Smart WiFi Tools from your Computer?  

1.     First you will need to make login for your Linksys router device. When you fill myrouter.local 192.168.1.1 in the address bar, you will able to login your device settings page.

2.     After that type Linksys wifi router login user name and password for your device access.

3.     Go for “Router Settings” option.

4.     Here you can click “Wireless” button.

5.     From there you can find the Linksys smart wifi tools and you can then use all these tools for your device settings easily.

 You can configure 2.4 GHz or 5 GHz settings for your Linksys router devices. When you want to access Linksys smart wifi tools then first you will need to create account for this. You can create Linksys smart wifi account free of cost and you can later add your Linksys router and wifi extender devices to your account.

 Linksys smart wifi tools can be used to make any kind of settings for your devices like you can use this account for handling your device admin settings and any kind of update settings.      

[smartcamproblems-blog]

Update Firmware for Orbi WiFi System

If you want that your Orbi device must work accurately for a long time then you will need to update firmware for your Orbi device. Not only Netgear wifi router devices but you will need to update the firmware for Orbi devices also. When you access 192.168 routerlogin net setup pages from your device, you can update firmware for your Orbi device.

You will need to get the model number of Orbi device only then you can update your device firmware.

How to Update your Orbi Netgear Device?

·        Access Netgear website and from there you can find the firmware for your Orbi device. Read the panel information regarding the xr500 nighthawk router from the blog here.

·        After that connect your Orbi device to your computer and then access login page for your Orbi device using 192.168 routerlogin net setup pages. You can fill http:// 192.168.0.1 IP address for your device account login.

·        After that fill Netgear Orbi login user name and password for your device login. These login details must be accurate otherwise you will not get access for your device.

·        Click on “Advanced” button.

·        After that click on “Administration” button. From there you will find the administration settings for your Netgear wifi router device.

·        At the end clicks on “Firmware Upgrade” button.

·        When you click on this button, you can easily update firmware for your Orbi device. Do not disturb the device for few minutes and wait until your device update firmware.

 You can also update firmware for your device using your mobile device. Netgear Genie application can be used to update your device. When you need to get expert support for your device settings then you can talk to Netgear team for help.  

[smartcamproblems-blog]

Integrate Arlo Cameras into the Samsung SmartThings App

If you have Arlo camera devices and you are you are having Samsung SamrtThings application, you can handle your Arlo camera application from your SamrtThings account. see the steps to integrate the Arlo cameras with Arlo cameras.

Using Arlo login page you can easily integrate your Arlo security cameras to Samsung SamrtThings app account. All steps are explained in this article so make sure that you are reading complete article from start to end.

What Arlo Settings are Possible from Samsung SmartThings Application?  

·        When you add your Arlo camera application to your SmartThings application, you can easily manage the rules and rule settings from your Samsung application.

·        When you want to use remote access for your Arlo camera device then these settings are possible from your Samsung app. You can talk to your family members from any remote location.

·        If you want to handle motion sensitivity for your Arlo camera devices then you can make these settings from these Samsung SmartThings account.

·        You can change your Arlo Login user name and password easily from your Samsung SmartThings application. When you want to secure your device login and admin login then you can have these steps for sure.

·        You can add or remove all your Arlo camera devices from your account from Samsung account.

 These are the benefits of using Samsung SmartThings application for Arlo camera settings. If you want to integrate your Arlo and Samsung account, you can talk to Samsung or Arlo support team for help. You can get help from the official website of these devices.          

[smartcamproblems-blog]

Backup for Netgear WiFi Range Extender n300

Netgear n300 wifi extevnder devices are easy to configure and using mywifiext new extender setup you can make advance wireless settings for these extenders. Here are the setups that are possible using Netgear n300 extender devices.

·        Using Netgear extender setup page you can update your device easily.   

·        You can change the login user name and password from the n300 extender setup page.

·        You can change or update bandwidth settings for your devices. Check and see the steps to reset the Netgear wifi wn2000 rpt devices.

·        You can setup the wireless devices that connected to Netgear n300 extender device.   

How to Backup Netgear WiFi Extender Device?

  when you need to reset your Netgear n300 wifi extender device to default settings then you must have backup for your devices first. When you backup your Netgear wifi extender device, you can use that file in future.

  1.     Access Netgear m300 wifi extender login page from mywifiext new extender setup page. These are an IP address that is used to access your extender login page.

2.     Fill Netgear wifi extender login user name and password.

3.     When you are at the setup page, you can get backup for your device. Select “Maintenance” tab from the setup page.

4.     After that click on “Backup Settings” tab.

5.     From there you can select the location where you can save backup for your wifi extender device.

  These are the steps so that you can have backup for your Netgear wifi extender devices. When you want to reset your device, you can press the reset button for few seconds or you can also reset your device from Netgear n300 wifi extender device itself.  

[smartcamproblems-blog]

Device List Tools for Linksys Smart wifi

Linksys wifi router devices allow wifi connections to many devices at a single time. Once Linksys router settings are done using http //linksyssmartwifi.com setup page, you can connect your computer and mobile device. When you want to get list of the devices that are connected to your Linksys router then you can make use of advance “Device List” tool. Check out the details of the commonly asked questions while using Linksys devices.

“Device List” tool is available under the Linksys smart wifi tools. These Linksys smart wifi accounts are free to create and all Linksys routers can be configured using Linksys tools. In this article we are going to explain device list tools for your devices.

How to Access Device List Tools for Linksys Router?  

1.     From your computer device access Linksys smart wifi account using http:// linksyssmartwifi.com address.

2.     Fill Linksys router login user name and password and make sure that you are filling accurate login detail.

3.     From “Smart WiFi Tools” tab you can select “Device List” tab.

4.     From there you can find the devices that are having wifi connections from Linksys routers.

5.     Select “Computer” button and find all the computers and laptops that are accessing your router wifi connections.

6.     When you select “WPS” button you can find all the devices that are configured using WiFi Protected Setup.

In the same way you can find the printer devices that connected to your http //linksyssmartwifi.com setup page. Linksys support team will also help in your device settings. You can get remote access support from Linksys team. Just like “Device Tools” you can also find many other tools from Linksys smart wifi tools so you can also take benefits from these tools.