#betafpv

[ki-ii]

fpv drone crash (was an easy fix but holy shi it was scary)

[firstquadcopter]

BetaFPV SuperG Nano TX: First GEMINI ELRS transmitter - First Quadcopter

The BetaFPV SuperG Nano TX is the first ExpressLRS GEMINI-enabled transmitter. It features two 1W 2.4 GHz radio modules and ELRS 3.3 firmwar

[dronesbg]

🎄 Подгответе се за празниците със супер оферти от Drones.BG 🎄

На вратата "чукат" вече коледните и новогодишни празници. За да не изостанете с подготовката с подаръци отрано сме подготвили супер промоционални оферти. Големи отстъпки на дронове за деца или начинаещи, дронове за напреднали и професионалисти, аксесоари, смарт джаджи и много още други. Подгответе се от сега със страхотни подаръци за вас или вашите близки :) Постарали сме се да подберем продукти, които ще определено ще Ви харесат. Бъдете иновативни и необикновени тази коледа, погледнете света от "високия" ъгъл и споделете радоста с други. Можете да направите чудесна изненада на някой с необикновена покупка.

[fjr-drones-fpv]

BETA95X + INSTA360 GO2 Perfect match. #pavo25buddies #pavo25 #betafpv #beta95x (em São Paulo, Brazil) https://www.instagram.com/p/CgunIwXJbSX/?igshid=NGJjMDIxMWI=

[firstquadcopter]

BetaFPV pavo25 ready to maiden flight

[droneshakk]

The Cetus Pro kit from @betafpv @betafpv_daily I got this especially to fly in the house. Use the links in my bio to take a look or purchase. Perfect for fpv beginners. The Cetus Pro FPV Kit is finally here! It is the ideal choice for beginners to advance quickly. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for new pilots as well as FPV pros to practice indoors and outdoors. Specification: Positioning system: Optical flow/ Barometer/ Laser Height positioning: Laser/ Barometer Position locating: Optical flow (effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1-2S Pro brushless FC VTX: 25mW Camera tilt degree: 30° Camera: C02 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 1 & Mode 2 optional Goggles: VR02 Goggles Motor: 1102-18000KV Brushless motor Propeller: 40mm 3-blade 1.5mm shaft hole Takeoff weight: 33.19g (without battery) Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (in wide & undisturbed environment) Bullet Point: Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. With emergency landing when out of control or low on battery, to ensure a safer flight. Made of PA12 material, the frame has excellent impact resistance. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag convenient to carry. Altitude Hold, Easy to Fly The altitude hold function enables Auto-Hover. This quadcopter can stay at a current height when pilots' hands are off the transmitter. Perfect for beginners and pros alike. Use the links in my bio @betafpv @betafpv_daily www.betafpv.com #betafpv #cetus #cetuspro #fpv #fpvdrone #fpvquad #drone #drones #betafpvcetus #betafpvcetuspro #fpvfreestyle #fpvracing https://www.instagram.com/p/CdnCDlutJwe/?igshid=NGJjMDIxMWI=

[droneshakk]

Check out the new LiteRadio 3 sent to me from @betafpv_daily & @betafpv ExpressLRS ELRS 2.4GHz FrSky Radio Transmitter Built-in Battery USB Charge Simulator Compatile Nano Module for RC Drone LiteRadio 3 Radio Transmitter is the newest remote control in the lite radio series. This transmitter features an ergonomically designed handle and has superb performance , newly updated gimbal, and multi-protocol support. (Frsky version) Compatible with the BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller. Specification: Brand Name: BETAFPV Item Name: LiteRadio 3 Radio Transmitter Frequency Range: 2.4G 2.4G System: CC2500/SX1280 Channel: 8CH Support Protocol: Futabas S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8, ExpressLRS 2.4G Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW Adapted Drone Type: Multirotor, Airplane Support USB Charging / Firmware Update Support BETAFPV Configurator / Most Practice Simulators. LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal Battery: Built-in 2000mAh 1S Battery Charging Connector: USB 3.0 Type-C Recommend External TX Module: ELRS Nano TX Module Recommend Accessories: Nano Gimbal for LiteRadio 3, Storage Case, Transmitter Neck Strap LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotor, airplanes and quadcopters. It gives you more than you ever thought possible from an entry-levels 8-channel radio. 8 channels. USB Joystick supports most practice simulators. Nano module bay for external TX module. Newly designed joystick gimbal for longer usage life. Support BETAFPV Configurator for updating, configuring, and tuning. Provide ExpressLRS 2.4G protocol version and Frsky protocol version for option. Built-in 2000mAh battery and USB charge supported gives 15 hours play time. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate. #betafpv #betafpvlitev3 #betafpvlite #fpv #fpvdrone #rc #radiocontrolled #uav #quadcopter #drone #drones #drohne #fpvfreestyle #fpvracing #dronepics #fpvquad https://www.instagram.com/p/CeEMf16tyya/?igshid=NGJjMDIxMWI=

[droneshakk]

The Cetus Pro kit from @betafpv @betafpv_daily I got this especially to fly in the house. Use the links in my bio to take a look or purchase. Perfect for fpv beginners. The Cetus Pro FPV Kit is finally here! It is the ideal choice for beginners to advance quickly. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for new pilots as well as FPV pros to practice indoors and outdoors. Specification: Positioning system: Optical flow/ Barometer/ Laser Height positioning: Laser/ Barometer Position locating: Optical flow (effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1-2S Pro brushless FC VTX: 25mW Camera tilt degree: 30° Camera: C02 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 1 & Mode 2 optional Goggles: VR02 Goggles Motor: 1102-18000KV Brushless motor Propeller: 40mm 3-blade 1.5mm shaft hole Takeoff weight: 33.19g (without battery) Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (in wide & undisturbed environment) Bullet Point: Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. With emergency landing when out of control or low on battery, to ensure a safer flight. Made of PA12 material, the frame has excellent impact resistance. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag convenient to carry. Altitude Hold, Easy to Fly The altitude hold function enables Auto-Hover. This quadcopter can stay at a current height when pilots' hands are off the transmitter. Perfect for beginners and pros alike. Use the links in my bio @betafpv @betafpv_daily www.betafpv.com #betafpv #cetus #cetuspro #fpv #fpvdrone #fpvquad #drone #drones #betafpvcetus #betafpvcetuspro #fpvfreestyle #fpvracing https://www.instagram.com/p/CdnCDlutJwe/?igshid=NGJjMDIxMWI=