#coating thickness meter

[mextechin]

Coating Thickness Meter | Mextech Coating Thickness Meter CM801E - MEXTECH

Buy Mextech Coating Thickness Meter CM801E for accurate paint & coating measurement. Ideal for metal surfaces, QC inspections & industrial t

[mextechin]

Coating Thickness Meter: Working, Benefits & Applications - MEXTECH

Learn what a coating thickness meter is, how it works, its benefits, and industrial applications. A complete guide to accurate coating measu

[linshangtech01-blog]

Galvanized layer thickness measurement

For example, the unevenness of the thickness of the galvanized layer is a problem that cannot be ignored in the manufacture of threaded fasteners. It is related to the threadability of the thread and the quality of the coating. The thickness of the electroplated zinc layer has a great relationship with the quality of the galvanized layer, mainly expressed in:(1) The corrosion resistance of the galvanized layer depends on the thickness of the coating and the exposed environment. The harsher the conditions of use, the thicker the coating, and the corrosion resistance of the entire coating depends on the weak part of the coating, including the local thickness. Local corrosion resistance.(2), where the zinc layer is too thick, defects such as roughness, nodules, and shedding are prone to occur.(3) Where the zinc layer is too thin, the gloss is poor, dark and foggy, and it is easy to expose the bottom during the process of light emission and passivation.The following is a summary of the effects of uneven plating thickness:For anodic coatings, the thin areas of the coatings cannot withstand sacrificial corrosion and will cause corrosion of the substrate. However, after a part of a part is corroded, it has already failed, and the excessive thickness actually forms a waste of coated metal. If the thin part is not rusted, the average thickness can only be greatly increased, and the plating processing cost is increased. Coating thickness meter can be used to measure the coating thickness. For cathodic coatings, the thin layer has a high porosity, and it is easy to produce point-like rust, and then the rust points increase, forming a continuous piece of rust. Compared with the anodic coating, the thin part of the coating corrodes faster. For local anti-nitriding and carburizing coatings, perforations are easily formed in thin areas and lose their protective effect. If the thickness is uniform, the porosity of each part is not much different, and the overall corrosion resistance is improved.For bright electroplating, the thin layer has a low cathode current density and poor smoothness, which deteriorates the overall appearance.Alloy electrodeposition is that the alloy composition is different at different thicknesses, or the appearance is uneven, or the corrosion resistance is inconsistent.

[linshangtech-blog]

Small size paint thickness meter

     Some time ago, when participating in the used car association, the gold medal instructor used the paint thickness meter LS220 to train everyone to test the car.     When using the paint thickness meter LS220 to inspect the car, it is usually necessary to first measure the thickness of the roof and the thickness of the roof is the thickness of the original car. Because the roof is usually not painted, the data measured on the roof is basically the coating thickness of the original car.     When we use the paint thickness meter LS220 to measure the car paint thickness, if the data of the roof is similar to the data of other positions, which means that the car has not been painted. It can be purchased with confidence.     The paint thickness meter LS220 allows you to quickly identify whether it is an accident car without looking at the naked eye. Therefore, the Linshang paint thickness meter LS220 is very useful in the used car industry. Small in size, it is very convenient to use or carry. In 0.5 seconds, you can quickly measure the thickness of the car paint.

[linshangtech-blog]

2019 best coating thickness meter

Second used car sellers and the coating factories are certainly familiar with coating thickness meter,  Linshang technology independently developed LS220 coating thickness gauge and the data of LS220 is consistent with the famous Germany brand -Qnix. When using the Linshang LS220 coating thickness meter. The following points need to be considered when using the coating thickness meter: 1. Measurement environment When using, try to stay away from strong magnets, sounds and strong electromagnetic field transformers, induction cookers, etc. 2. The measured substrate When using coating thickness meter LS220 to measure magnetic or non-magnetic substrate, zero adjustment should be performed according to the corresponding Fe or NFe standard, the measurement results are more accurate.  Want to know more information about our product, please contact our sales engineer Anita Liu: Email:[email protected] Skype/Line:  linksun2008 WhatsApp/WeChat: [phone] Mobile: [phone] Tel/Fax: [phone]

[myponpe]

[myponpe]

Coating Thickness meter

http://www.ponpe.com/%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B8%A7%E0%B8%B1%E0%B8%94%E0%B8%84%E0%B8%A7%E0%B8%B2%E0%B8%A1%E0%B8%AB%E0%B8%99%E0%B8%B2.html