Roller Granulation Equipment Working Specificaions
Double roll extrusion granulator is a new generation of high-efficiency fertilizer production machinery developed by our factory. When starting the machine for the first time, please pay attention to the following operation methods.
1. Before starting the drum type extrusion granulator buying from sx, it shall be heated for about 40 ~ 50 minutes. Raise the temperature until the motor V-belt is pulled by hand until it is free. Pull eight to ten times in the normal operating direction.
Then continue heating for about ten minutes, and then start the machine, but continue heating, because the normal production needs to continue to supplement the heat; Arrange different temperatures according to different characteristics of plastics.
2. During the normal operation of the counter roll granulator, the temperature of the machine should be kept stable and should not change from high to low. The vents are adjacent until the head temperature reaches about 200 degrees.
3. The feeding shall be uniform and sufficient. The feed speed should match the feed speed of the machine. Otherwise, the quality and yield of particles will be affected.
4. In case of shutdown, the main engine shall be completely cut off. It is necessary to remove the pipe plug (with a wrench). Preheat before next use.
More detailed info, welcome go to https://fertilizergranulatormanufacturer.com/npk-compound-fertilizer-granulation-equipment/












