How is Epoxy Garage Floor Paint Applied?
Garage floors can look shiny and stunning with the help of epoxy. Auto showroom brilliance can be achieved with the help of epoxy floor paint for garages as it will transform the dull garage floor to a shiny auto showroom floor look.
The concrete is painted with epoxy garage floor paint which is tough and durable. It has the capability of resisting oil, grease, and other substances, which can completely ruin a floor that has been painted with normal paint. These paints can be found in a host of different colours, and these epoxy coatings make the garage floor shine for several years.
Application of the Epoxy Coating
In reality, there are several types of garage floors which may not be receptive to the epoxy paint. This is one of the reasons why the customer should evaluate their garage floorings, and the experts at Cavco Products Pty Ltd. suggest following these steps to get a fresh coat of epoxy on their floors.
1.) Check for Signs of Moisture-
A failure in application arises usually due to moisture as a slab of concrete filled with moisture content cannot be coated evenly with epoxy. The calcium chloride moisture test must be employed to check for moisture before application of epoxy garage floor paint.
2.) Cleaning and Degreasing the Garage Floor-
The debris from the floor must be cleaned with the help of a vacuum cleaner or a broom. A stiff brush and degreaser must be utilized for removal of grease. A pressure washer may be required for heavy stains, and the floor should be dried before further steps.
3.) The Correct Epoxy Product must be Selected-
The concrete must have a temperature at a minimum of 55 degrees F, and air temperature between 60 to 90 degrees F so that the epoxy cures and dries well. Two-part solvent based epoxy paint must be considered as the product for your floor because it should last longer.
4.) Grinding, Acid Washing, and Etching Garage Floor-
A diamond grinder or shot blaster must be used so that the smooth garage floor becomes like sandpaper. The concrete surface must be prepared quickly and thoroughly, and the diamond grinder requires diamond-coated sanding pads whereas the shot blaster acts like a sandblaster.
Etching or acid washing the concrete is another solution. The etching solution must be poured on the floor and then applied with a stiff brush. It is available as a kit with the epoxy material. The customer must use protective gear while applying the acid. The floor must be dried for a few days after the acid is applied.
5.) Mix and Apply the Epoxy-
Apply painter’s tape or plastic sheets all over the room. The two-part epoxy has catalyst and resin which are the important constituents which must be mixed before application. The garage must be ventilated during the application of epoxy, and the customer will get less than 2 hours for the application.
The customer can seek professional services from Cavco Products Pty Ltd. to get the epoxy coated faster. Sometimes, two or more coats may be required. The new epoxy surface must dry for many days before the car is parked in the garage. For more information, one can visit the Cavco’s official website