So imagine with me. You are working your machine as in the first picture. Your supplies come from the bin on the top right of the picture into the middle bin in center of picture. Further imagine that the center bin is angled toward the operator who is sitting on the side of the machine facing said bin as in the second picture. Also imagine the operator working from the bottom up because that's how said parts are situated. Further imagine that the lower levels empty and the top shifts down as the machine starts and stops and clicks against the rail during work. Imagine three steel parts each weighing about 2 pounds landing in said operators open lap (as viewed in second picture). Not one at a time but one right after the other while said operator is busy putting parts in the chutes. #Dadnolongersingsbass #icepackinaisleone #Icannotbreathe #Walkingissimplyachallenge https://www.instagram.com/p/CE7tGFrh1wS4-jPKKRbloFvvJgTkPmCZDEXJUI0/?igshid=1m932h43i7i8v