RGB LED Module Project STEM
RGB LED Module Project STEM This RGB LED Module designed with 2.54MM Pin header. To use with Dupont cable is advised. This RGB Module is very suitable to program by Arduino, STM32, ESP32, Raspberry Pi etc. Specification of the RGB Module Working Voltage: 3.3V-5.5V Connector: 2.54mm pin header Mounting Method: Screw-on Mounting Hole Specifications: 3mm diameter, 10mm pitch Module Dimensions: 36mm*31mm*18mm Signal Type: Digital Trigger Condition: A high level input on the RGB pin lights up the LED; a low level turns off the LED. Connector Description: GND connects to the negative terminal of the power supply, R connects to the red control signal pin, G connects to the green control signal pin, and B connects to the blue control signal pin. About LED Introduction LED stands for light-emitting diode and is made from a mixture of compounds: gallium (Ga), arsenic (As), and phosphorus (P). Gallium phosphide diodes emit red light, gallium phosphide diodes emit green light, and silicon carbide diodes emit yellow light. The reverse breakdown voltage of an LED is 5V. Because its positive volt-ampere characteristic curve is too steep, the module includes an onboard current-limiting resistor to control the current flowing through the tube during use. RGB, which stands for red, green, and blue channels, is an industry color standard. RGB displays a variety of new colors by varying and superimposing these three channels. According to statistics, 16,777,216 different colors can be created. What's the MOQ? Usually, Minimum Order Quantity is 100pcs per model. However it is negotiable if you are also looking for other related parts list. Welcome chat with us via whatsapp or post us message here. Read the full article