#oem tango key programmer

[myemilyzhang]

How To Update OEM TANGO Key Programmer Software

Customer: I bought an OEM Tango key programmer from your store and I’d like to update its software now. Could you tell me how to do it? Thanks.

Answer from obd2tool.com:

You can visit their official website, where you can download tango key programmer software  directly and install it.

http://flyobd.com/shop/download-center/

Basic Info about Tango transponder programmer:

Main Function: Cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.

Firmware Version: V1.072

Software Version: V1.111

Supported Language: English

Requirement on Computer: Works for Windows XP(SP2 or later) Professional Version, Windows 7 Ultimate and Windows 8 Professional.

OEM Tango Car List:

Acura, Brilliance, Chang’an, Chang cheng, Chery, Daewoo, Daihatsu, FAW Group, Geely, Great Wall, Honda, Hyundai, Infiniti, Isuzu, Kawasaki, Kia, Lexus, Mazda, Mitsubishi, Nissan, Proton, Roewe, Saipa, Sammand, SsangYoung, Subaru, Suzuki, Tata, Toyota, Yamaha, AD100 Out In codes 8 digits calculator, BMW CAS Keyless Go key maker, BMW CAS remote key maker, BMW CAS unlock and write locked with unknown password & transponders PCF7943&PCF7944 key maker, BMW bikes (Hi Tag 2) Key maker, DAF key maker, KESSY (Hi Tag 2) Audi , Bentley, Porshe, VW key maker, New AUDI A6/Q7 EZS (Megamos 8E) Key maker, VW Key maker

[cnobd2tool]

How to Program Toyota Previa 2010 smart key

Here is the tutorial on programming key for Toyota Previa MPV 8 seater when all smart keys have lost by CnAutotool.com engineer.

If you have original key, you can directly add key with Tango Programmer. But if you lost all your keys,you cannot directly add key.

Toyota straight key all keys lost: need to remove ECU immo box and do initialization data modification to add key.

Toyota smart remote key all keys lost: require not only remove immo box to initialize data but also remove ECU-Smart box to modify data to add key. Program Toyota Previa 2010 smart key all keys lost in 4 steps:

Step 1: Remove ECU immo box and ECU-Smart box

ECU Immo box is in the groove behind the evaporator under the dash. You need to disassemble the full dashboard. (See pic. below)

Toyota Smart box is behind the glove box near the A-pillar (see pic. below)

Step 2:Initialize IMMO data and Smart key box data Open ECU immo box 89784—28011, find out chip 93C46, read 93C46 data with ecu programmer,i.eXprog

Change all data marked blue to 0, these letters stand for key numbers. Initialization make it being key learning status, so it does not have key numbers, we change them to 0. The data marked in red are synchronized with engine computer data, DO NOT change them. Change all the rest data to F.

Open Toyota Denso Smart key box 89990-28131, find chip 93C86. Do not change data marked in red. Change all the rest data to F.

Step 3: Re-install IMMO box and smart box

Re-write data just read back to immo box and smart box. Re-install immo box and smart box to car. Switch ignition on, dashboard indicator turns on, you can connect Obd2 Key Programmer with car to build communication. Step 4: Add smart key Connect key programmer,i.e TM100,Tango with car Select Toyota Select Smart key programming Follow key programmer menu operation until the procedure is done

The new programmed key will start car directly Do not need to synchronize OBD 4-pin to 13-pin.

Note: Better initialize IMMO data with original data, do not use other car’s data to modify . If you initialize original data, the engine computer keeps the same data with immo which will save you 40 minutes to synchronize. It will directly start car.

Technical support “Program Toyota Previa 2010 all keys lost“

http://lvyunlei.bcz.com/2017/09/16/vvdi2-or-tango-which-is-better-for-auto-key-programming/