#openbox s10

[candyscobuy-blog]

Alguns estrutura do arquivo de mudanças na S10 foram feitas com o mais óbvio Sendo o tamanho. O S10 é consideravelmente menor do que o S9 e isso permite, por um preço mais barato de transporte.

 Openbox S10

 Openbox S9

A mudança não é tão óbvio é a memória. O S10 tem mais memória que o S9 e eu acho que essa mudança faz com que o S10 Execute um pouco melhor que o S9. As pessoas querem trabalhar como seu S9 S10 de firmware tão estava escrito que permite S9 para a função de memória Privados em algumas maneiras de como S10.

Com isso dito, todos os receptores Openbox ea maioria dos outros receptores Ali que estão disponíveis na América do Norte são feitas na China sob algumas condições de o mais barato possível. IMO, você recebe o que você paga e eu já vi tópicos de pessoas reclamando Várias questões ou problemas com hardware Sobre o Openbox. Eu considero os receptores Openbox para ser descartável, como uma espécie de isqueiro Bic. Quando um Openbox tem problemas de hardware, é melhor jogá-lo Normalmente no lixo em vez de tentar solucioná-lo.

Se eu estava indo para obter outro Openbox, seria a S12. O S12 é menor que o S10 e os seus custos reflete o que eu acho que é o Openbox realmente valha a pena. Olhe para o topo da página e você vai ver um anúncio de um de nossos patrocinadores. Olhe para o preço e você pode querer considerar em vez do S12 a S10.

   Openbox S12

Outra opção seria a de adicionar cerca de 100 dólares a mais para seu dinheiro e comprar um S10 Anaconda Optibox. A Anaconda tem mais funcionalidades do que Optibox Qualquer Openbox, mais eles são construídos em condições muito melhores. O cego Optibox verificar uma melhoria em relação nada también Openbox tem. Eu acho que o Optibox estará disponível em uma ou duas semanas aqui na América do Norte.

Content from rglssz.com

[candysco1-blog]

Hola a todos, les comento Que Me Estoy Iniciando Con Este deco openbox s10, ademas Tengo un maxlfy, EL TEMA Que me interesa capturar Poder de Los Canales HD, ayer realice Unas Pruebas Con iks y apesar de Que Pude capturar algunos Canales HD El Resto sin me FUE Posible (ConSiderar Que Estoy apuntando al mamazonas), de los 5 tp Qué me indicaron en solitario en Uno encontro Canales y Estós were los HD El Resto me figuraba Con INTENSIDAD de Señal del 40% y Calidad 10%,-le pregunte al Proveedor de iks y me indico que era Por Problema de Alineación de la antena, ESTA FUE Instala Por Movistar en Su Momento y sin que ningun tenido Problema con El maxfly Todos Veo Los Canales, EL TEMA El Proveedor que me Corto y no me Quiere Dar El Servicio, la Consulta es, Alguien TIENE algun Contacto párrafo Comprar EL I-box o algun Proveedor de sistemas de conocimientos indígenas que No ikslatino mar, Desde ya agradezco SUS Comentarios.

China Electronics Wholesale

[candysco1-blog]

Estimado bienvenido, lo primero que tienes que hacer es actualizar tu Receptor Openbox s10hd, con firmware original si lo es, o si no con firmware para clon, sobre el Dongle I-box tambien actualizarlo con firmware de fecha 27/01/2012, primero ejecutas el loader le das en STAR y luego prendes el I-box, no antes, la señal de las dos antenas tiene que ser la mejor que puedas, para que funcione sin pixelarse, ( ojo ) ve si el tuyo esta en la lista, de lo Openbox Originales, para ver su ID, entra en menu informacion. ID del Receptor Openbox Originales 00D0 00EA 085B 0DOC 98A1 98F2 9CF4 9D1A 1015 0D7E 380C 10AA 1466 14D5 1474 0110 1509 15AE 15CB actualizada la lista Para activar el twin protocol setup, en menu del receptor, vas a network setup y donde dice sr232 appl con el cursor del control remoto cambias a twin Y4 & Y6, SE ENCIENDE UNA LUZ ROJA, y eso seria todo, cualquier duda pregunte. Saludos Osmanx - Regulation Technology

[candyscobuy-blog]

How to add clines to your OpenBox s9 s10 & access cline data

For those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines.

First download the attached test cccam.cfg file and editor at the bottom of this page.

Once unzipped open the file and overwrite the test clines with your own active clines, then save the changes.

Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is.

Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver.

Now goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button.

Now select Update Files by USB and click the OK button.

  Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.

If there is no tick displayed, select CCcam,cfg [CCcam Plug] and click the OK button.

Once the tick is displayed, click the Yellow button.

Now select CCcam Plug Setting and click the OK button.

Now select option 1 .. CCcam.cfg and click the OK button.

Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated.

Finally check your Network Settings are configured correctly.

If your router supports DHCP turn it ON and click Apply.

If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly.

Now reboot your receiver, and if all is okay, you may start viewing channels.

Additional cline data info window:

Once you have access to a channel via your cline.

Click Menu -> Network Setup -> CCcam Client Setup -> Manage Config Files -> CCcam.cfg 

then highlight any single cline and click the 'Info' key

Regulation Technology - rglssz.com

[candysco1-blog]

The Openbox S10 features similar architecture to that of the S9 with fast, accurate blindscan, quick channel changes, high sensitivity tuner, PVR and more. All of the critical functions of the S9 are retained but with the following improvements:

  Much smaller, compact casing.

Replaceable tuner module.

New remote control with "VFORMAT" button in a better location.

Replaceable HDMI Module

New GUI

  MAIN FEATURES

1/Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal

2/Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4

3/Digital Video Recorder through USB (external flash or hard drive are not included)

4/The most affordable FTA HD receiver on the market today.

5/Worldwide compatible

6/Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)

7/Linux MIPS Operating System

8/HD DVB-S2 SHARP 7306 Tuner

Welcome to make an order on B2B website-Regulation Technology Co.,Ltd.

[candyscobuy-blog]

Openbox S10 HD receiver and Openbox S9 HD receiver.

What is the difference?

In a word, Openbox S10 HD receiver updating from S9, more competitive.

And the shape of S10 is smaller than S9.

Below is the picture of Openbox S10 HD receiver.

openbox s10 hd receiver is a very cheap kind of HD receiver;

Can be used around the world; 

General Specifications:

300 MHz MIPS Processor - Linux Operating System 

Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1; 

Fully compliant MPEG-2 MP@HL & MP@ML; 

Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3); 

SCPC & MCPC receivable from C/Ku band satellites; 

multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS) supported) 

NIT search supported; 

Support MHEG-5; 

Support HDMI 1.3; 

Support PVR(store in USB disk); 

Multimedia files playback(by USB); 

Support Electronic Program Guide(EPG) for 7 days; 

Teletext and subtitle out through OSD; 

Support multi-lingual DVB subtitle and teletext; 

Automatic and manual channel scan options; 

automatic service scan 

channel-change time < 1 second 

OSD in many languages and skin-support 

Multilingual support on screen menu (OSD)

LED Display 

Multiple display mode: 1080i/720p/570p/576i/480p; 

MPEG-2 / H.264 Hardware decoding 

Videotext Decoder 

Analog audio output: stereo(L+R); 

Digital audio output: S/PDIF by coaxial and optical; 

S/PDIF Interface for digital bit stream out (AC-3) 

YCbCr available; 

2 x Scart (RGB, FBAS or S-Video) 

Screen format:auto, 4:3, and 16:9; 

Upgrade software through USB2.0 port; 

Powerful program management function, parent lock; 

CA 1x slot and CI 1xslot 

10/100Mbit Ethernet Interface 

directly bouquet-lists

[candysco1-blog]

Openbox S10 HD / (set top box S10)  More details: 

1/Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal

2/Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4

3/Digital Video Recorder through USB (external flash or hard drive are not included)

4/The most affordable FTA HD receiver on the market today.

5/Worldwide compatible

6/Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)

7/Linux MIPS Operating System

8/HD DVB-S2 SHARP 7306 Tuner 

Openbox S10 HD PVR digital receiver General Specifications:

300 MHz MIPS Processor - Linux Operating System

Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;

Fully compliant MPEG-2 MP@HL & MP@ML;

Fully compliant MPEG-1 Layer I & II & III, Dolby Digital Audio(AC3);

SCPC & MCPC receivable from C/Ku band satellites;

multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS) supported)

NIT search supported;

Support MHEG-5;

Support HDMI 1.3;

Support PVR(store in USB disk);

Multimedia files playback(by USB);

Support Electronic Program Guide(EPG) for 7 days;

Teletext and subtitle out through OSD;

Support multi-lingual DVB subtitle and teletext;

Automatic and manual channel scan options;

automatic service scan

channel-change time < 1 second

OSD in many languages and skin-support

Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Portuguese, Turkish, Russian, Polish, Arabic, selectable--and Language can be increased in the future;

LED Display

Multiple display mode: 1080i/720p/570p/576i/480p;

MPEG-2 / H.264 Hardware decoding

Videotext Decoder

Analog audio output: stereo(L+R);

Digital audio output: S/PDIF by coaxial and optical;

S/PDIF Interface for digital bit stream out (AC-3)

YCbCr available;

2 x Scart (RGB, FBAS or S-Video)

Screen format:auto, 4:3, and 16:9;

Upgrade software through USB2.0 port;

Powerful program management function, parent lock;

CA 1x slot and CI 1xslot

10/100Mbit Ethernet Interface

directly bouquet-lists 

Packing for OPENBOX  S10 :

Git box:24.5*24.5*5.5CM

1x User Manual

1X S10 HD PVR satellite receiver

1X Remote Control

[stauratbailey-blog]

Openbox S10 is HD satellite receiver and earlier version of Openbox s10 which is also considers amazing features and powerful performance and it eventually become popular HD receiver at that time.