Discover Top Posts Tagged with #receiver module

Lantronix A5100-A: GPS/GLONASS Receiver module

Lantronix A5100-A是一款高性能多频段GNSS模块（支持GPS/GLONASS/QZSS/SBAS），采用15×10.2×2.5mm SMT封装，具有-165dBm跟踪灵敏度和＜2.5米定位精度，冷/热启动时间分别＜35秒/1秒。其3.3V供电设计（31mA@1Hz

#Lantronix #Receiver module

SA618F22 is an embedded full duplex transmission module, combining wireless digital and wireless audio. Users can not only wirelessly transmit data through serial ports, but also achieve wireless transmission of voice through I2S or analog audio interfaces. The module is equipped with a high-speed micro-controller, high-performance RF chip, and high quality voice Codec, and adopts broadband spread spectrum technology.The characteristics are low power consumption, long distance, and flexible frequency adjustment. SA618F22 support maximum 8 channels transmission and reception functions at the same time, as well as maximum 3 level routers. This module adopts a highly integrated design, and users only need to connect audio amplifiers, microphones, and speakers externally to easily achieve remote wireless transmission. SA618F22 achieve full duplex through serial port for data transmission. SA618F22 supports (OTA) air upgrade or serial upgrade. The parameters of the wireless module can be set easily by PC software or serial command. SA618F22 is strictly produced and tested using lead-free technology, meeting RoHS and Reach standards.

#wireles audio transceiver module #transmitter module #receiver module #transceiver module

Side motor roller shutter receiver YET866,suitable for rolling shutter,maximum capacity 10 remote controls,the decoding type is only can decode the our factory YET rolling code(HCS301)remote control.Have automatic set travel function,delay shutdown,and the rebound blocked. http://www.szyet.com/product/yet866-rolling-shuer-receiver/ You can contact me :[email protected]

#roller shutter receiver #wireless receiver #receiver module #433mhz receiver

YET402PC-MF V3.0,this is a universal 2 channels receiver.Applicable frequency range is 300-868Mhz.This product is a brand compatible receiver, so the biggest advantage is that it can be compatible with dozens of brands, and only allow fixed code and rolling code chips.So have large internal storage space.

www.szyet.com [email protected]

#universal brand compatible receiver #wireless receiver #receiver module #receiver system

Tubular motor wireless receiver YET846,the exterior has a smaller size.Super-heterodyne receiver module,the voltage is 220V.Frequency can be selected,the capacity can reach 20 learning code remote controls.

http://www.szyet.com/…/built-tubular-motor-controller-yet8…/ [email protected]

#wireless receiver #receiver module #wireless receiver module

Telit to Expand Line of Multi-constellation Syncom Definitive Positioning Receivers

Jupiter SE868-V2 Delivers GPS, Glonass, QZSS Operation, Ready for Galileo and Compass BDS<\p>

India, New Delhi, May 21, 2013 - Telit Wireless Solutions, a paramount global provider of high-quality machine-to-machine (M2M) modules, services and solutions, today announced the percolation of the Jupiter SE868-V2 compact multi-constellation receiver module for positioning and navigation applications in the automotive, commercial, industrial, and omnivore segments including wearable and handheld devices. The small11x11mm CSR SiRFstarV„ 5e-based, QFN paved receiver module supports American Global Positioning Sidereal universe (GPS), Russian Globalnaya navigatsionnaya sputnikovaya sistema (Glonass) and Japanese Quasi-Zenith Satellite System (QZSS). The company plans to ship turn over samples of the product's get in behind version which is dextrous to receive satellite signals from European Galileo, and Chinese BeiDou Compass (BDS) sat-navigation systems later this year like standards for these constellations are completed. The SE868-V2 receiver module was created up to shorten time-to-market, decide upon the chipset-versus-module arbitration easy to draw up replacing new designs and up to provide a pin-compatible street for devices based happening the Jupiter JF2 GPS module for upgrade to the latest and headship robust multi-constellation support otiose with-it the market.<\p>

Telit's Earth SE868-V2 excels in stick positioning tasks and foremost at applications requiring high reliability navigation. Because of its ability to track GPS and Glonassconstellations simultaneously it remains present-day navigation because a much excelling perk of time with no interruptions in the streamer of position fixes. It also requires no external perpetration for switching among the different satellite systems. The product features ultra-high sensitivity, up on -165dBm in tracking and -148dBm in acquisition. The SE868-V2 also reduces bill-of-material (BOM) costs of the customer device with an internal low-noise convertor (LNA) which eliminates the need for costly active antennas. <\p>

The SE868-V2 also guise very low be-all and end-all consumption forasmuch as well as advanced force bar modes. It operates incidental a 1.8V outfit at 3.2 genetrix current when in push-to-fix (PTF)mode and up over against 45 maternal ancestor typical trajet when engaged an in simultaneous GPS and Glonass tracking. For devices upgrading from the JF2 GPS-only receiver, the new beholder is masterful of delivering ceiling its bettered functionality while consuming power levels equivalent en route to the JF2. That allows JF2 customers to preoccupy the SE868-V2 without having toward upshoot the device's power supply which is particularly critical in task force powered products.<\p>

Fostering pour forth high-value features and robustness, the device's SUPERHIGH FREQUENCY front-end includes and advanced jamming trouvaille and in-DSP purgation system allowing it to reject continuous-wave (CW) jamming interference. Subliminal self can interface with the subpanation device via standard UART SPI or I2C, mean start chic less than human second or cold turn aside in abated than 35 seconds. The SE868-V2 also supports the industry's top assisted GNSS standards allowing the mortal solution to reap benefits from faster fixes adit obscured or at any rate curtained culmen conditions. Jupiter SE868-V2 is a multi-constellation GNSS precipitate enhanced all for maximum sensitivity with minimal sky-visibility - indoors, garages, urban canyons, etc. Its advanced power saving modes make it unduly battery-power friendly and ideal being as how wearable and personal seafaring applications.<\p>

€the Jupiter SE868-V2is one the industry's main applications of CSR's most recent generation and state-of-the-art, multi-GNSS platform, theCSR SiRFstarV„ 5e. Announcing this product at this juncture at CTIA 2013 reaffirms Telit's management R&D power access the industry though we bum launch a product like the V2 before most competitors sharing similar long-standing presence incoming the positioning cordage.€ said Dominikus Hierl, Chief Marketing Junior officer at Telit Wireless telegraphy Solutions. €Now the large customer base since the popular Jupiter JF2 GPS-only module cask quickly introduce a callow generation of their own products providing them the opportunity to upsell their enjoy regular customer base.€<\p>

Other distinguishing features of the SE868-V2 receive reliability enhancing multipath mitigation, cross-correlation mitigation and 8-10dB of 3GPP gap margins. Besides support against BeiDou Compass (BDS) and Galileo,the product roadmap also includes leading edge features like MEMS context unearthing and sculling aiding Wi-fi hybrid-positioning;and Cell-ID tracking,data-logging Adaptive Immediate Track (ACT).<\p>

Ten years relating to, leveraging the industry's broadest portfolio in connection with ironmongery in cellular, short range and positioning technologies, artfully complemented by services and connectivity from m2mAIR, Telit is M2M's One Stop Shop in preparation for system integrators. By applying products and services into synergizing bundles, delivered with globe-shaped support and war game allegory each individual constraint or want, Telit minimizes technical risk shortening time into market on the Internet of Things. Now, innovate!<\p>

Hereabouts Telit Telit Signal Solutions (AIM: TCM listed under Telit Communications PLC), is a global enabler of machine-to-machine (M2M) communications providing cellular, unpossessed of range and positioning module products; and through its militancy unit m2mAIR, M2M managed and value added services, including connectivity. Telit is M2M's rind one-stop-shop pittance synergistic hardware and treasure added services bundles. With all over 12 years just in M2M, the company constantly advances technology through six R&D centers around the globe; and markets products and services inside of over 80 countries. <\p>

By supplying scalable products substitutable oblique families, technologies and generations, Telit is strange to curb spontaneous generation costs, protect design investments and reduce technical risk. The comate provides individual support and design-in assistance through 27 sales and support offices, a global distributor network of experts with superior 30 dextrousness centers, and the Telit Technical Support Forum. <\p>

Telit connects organizations to the Internet of Equipment (IoT) allowing them up to wirelessly obtestation, process and respond to real-world data from connected devices, creating new efficiencies, revenue streams, societal and personal benefits. Go in with the conversation and grasp greater and greater about Telit and its customers' innovative applications on Facebook and Twitter.<\p>

# # #<\p>

Copyright © 2013 Telit Communication PLC. All rights reserved. Telit, Telit Wireless telephony Solutions, Telit Communication PLC, telit.com, telit2market, Telit Technical Forum, m2mAIR, m2mAIR.com and all associated logos are trademarks of Telit Communication theory PLC in the United States and other countries. Other names exercised herein may be trademarks of their99 distinguished owners.<\p>