What's the process like for slab building mugs? I've only done them on the wheel before and i was wondering how hard it is to get a smooth rotational symmetry when you don't have the wheel helping you
they’re pretty straightforward, but they definitely take practice. and I think an aspect of slab building (and hand building in general) is that it’s not going to be perfect. I had to learn to accept that and to love it for what it is
I use two tools to get my slab-built mugs nice and round:
1. a turntable/banding wheel. spinning it as I’m refining the shape helps keep it round, just like wheel-thrown pottery
and
2. The Cone
The Cone can be any cylinder that’s narrower at the bottom at wider at the top, and the right size to fit in your mug. just press it in and shape the rim to it, don’t leave it in the mug as the clay shrinks
but here’s the whole slab-building process!
under the cut
1. roll out clay.
this time I cut it straight from the bag so it’s air-bubble free, but otherwise it should be wedged first. I use a rolling pin with measured rings on the ends so I can easily roll it out 1/4” thick
2. I used to use a cardboard template and a pin tool for this (you can find the templates online and print them, or you can cut up a disposable cardboard cup to make a template)
but I upgraded to cutters a little while ago and I love them.
remember also to cut out a circle for the bottom of the mug.
3. smooth
4. let sit for a couple hours, or put it in front of a fan for awhile, so it’s not too floppy to work with. it should be flexible, workable, but not floppy. it shouldn’t crack if bent but it should stand up on its own once you’ve got it in a circular shape
5. I usually make a handle right before starting to build the mug, so it’s firm enough to work with by the time I’m done with the cylinder part of the mug. I prefer handle-making tools, rather than pulling them by hand
6. cut the mug edges at a 45 degree angle. you can eyeball it or use a tool. remember to flip the slab before cutting the other side, so they line up lol. I only made that mistake once.
I used to not do this step but my seams are a lot cleaner now.
7. score and slip, then join. once I’ve blended the two sides together a bit with my fingers, I like to use a soft rubber rib to smooth out the seam on the inside and outside, adding extra slip to fill any little gaps. it’ll be ugly at first, just keep refining it!
8. score and slip to attach the bottom piece to the cylinder. I add extra slip around the inside of the mug where the bottom attaches, and once I’ve flipped the mug back over, I smooth the extra slip along the seam on the inside with a brush or sponge, to help fill any gaps and attach everything nicely
9. here I usually use The Cone. the rim is going to warp again as I add my handle, so I’ll use the cone again later. it’s just helpful to have the rim round before adding a handle
10. attach handle. I like to attach them over the seam so as to leave the rest of the mug as smooth as possible for decorating
11. use The Cone again, refine the rim, cover mug with plastic and leave until leather hard
12. trim it, clean it up, etc (here’s one I prepared earlier!)
There was a little volunteer maple tree sapling in our front yard that we had to remove due to potential interference with the sidewalk. It made us super sad, so we saved some leaves to preserve in clay. So in addition to my usual seasonal grape leaf flatware pieces(which I haven't started yet oops), I'm making some maple leaf pieces as well! Also there's a mountain ash plate because I had extra space on a slab.
Also! A certain little pigeon seems to have taken an interest in clay! Gaze upon his beautiful artwork which he added to the bottom of one of my bowls while I wasn't looking. I had to give him a chunk to play with or risk more bird art on the rest of my work lol. I might fire some of his stuff, just cuz aww.
I started making "Warli Vessel #2" (the mug) a little bit before I had the opportunity to make "Warli Vessel #3" (the handled vase), so these two came out of bisque firing and glaze firing together, along with a dish I made for the mug.
This mug is definitely my favorite and probably the one that turned out the best among all my other pieces in this collection.
