Check out the Tiny Ape Freestyle quad from @darwinfpv_official at minimal cost just $130 paired with the @runcam Nano 4 Camera at $50. Tiny Ape Freestyle is the first 2.5'' drone for Darwinfpv. In order to meet the needs of more friends and we have made multiple attempts. It comes with the Darwin ELRS2.0 F411 15A Bluejay AIO and the VTX006 which has 25-600mW output power. Drone Configuration: Weight: 50.3g (without batteries and paddles) Propeller: Gemfan 2512 3-blade propeller FC&ESC：F411 1-3S 15A FC(Built-in ELRS 2.4G receiver) Built-in Receiver Protocol: SPI ELRS 2.4G Motor: 1103 8000KV Brushless Motor Camera: RunCam Nano 4 VTX:25-600mW VTX AIO Firmware: betaflight_4.3.0_BETAFPVF4SX1280 ESC Firmware: Bluejay_S_H_50_48_v0.14 Recommended Battery: 2S 380-450mah The factory AIO firmware only supports ELRS_V2.0, and can be used with ELRS_V2.0 version TX. The firmware file name of ELRS-V2.0 is BETAFPVF4SX1280 Darwinfpv ELRS-V2.0 CLI Darwin AIO 002 FC Pairing Tutorial RunCam Nano 4 Camera The RunCam Nano 4 uses a 1/3'' CMOS sensor, 2.1mm lens and 800TVL resolution for better realistic color and clearer low-light night vision. 1103 8000KV Brushless motor 1103 8000KV Brushless motor is only 3.7g and it’s power and thrust are surprising, and the flight time can achieve about 5 Minutes. We have notice: the motor only supports 2S batteries, and if it is connected to 3S to push the throttle too much, the motor will be permanently damaged . #darwinfpv #darwinfpv44 #tinyape #fpvquad #FPVfreestyle #FPVracing #droneracing #fpvdrone #runcam #runcamthumb https://www.instagram.com/p/Cen-UTJt3mi/?igshid=NGJjMDIxMWI=