#wipporn

[bybearhands]

Citadel Warhammer Age of Sigmar Stormcast Liberator and Lord Celestant on Dracoth models in-progress.

[bybearhands]

A montage of models in-progress. All Citadel, from Age of Sigmar, Shadespire, and Warhammer 40000.

[bybearhands]

The previously pictured boat earlier in its progress, showing the naked balsa wood construction and the planks for the deck. The balsa is about 1/16-inch thick and was cut with a razor saw.

[bybearhands]

A river barge I made for the Vengeance book release event. The boat is balsa wood fixed with wood glue and stained with acrylic inks; the ropes are jute twine also stained with acrylic ink and tied to a bent paperclip on one end and a loop of "rope" at the other. It is modeled on the punt style of boat used in our world. Sorcha is on board for scale. As usual, this is a picture of it in progress.

[bybearhands]

Primed with Apple Barrel brand paint and alcohol mixed in a ratio of approximately 8 to 1, or approximately 10 "drops" of paint to approximately one and a half large droppers filled with alcohol. Sprayed at 40 psi.

[bybearhands]

I made a gray wash according to the instructions found linked below, fist making the wash base then adding some of it to a dropper bottle with some gray and black acrylic inks. The recommended 40 drops of color (gray) didn't produce a dark enough wash as I wanted; I tested it on this Paladin of the wall as pictured. So I (think) I added 10 more drops of gray and 20 of black to get it the shade pictured and with which I'm satisfied.

[bybearhands]

Progress on a friend's pieces from Merchants and Marauders. Painting is completed on these and many of the others. When all are complete, I will seal them in Modge Podge then matte spray for durability.

[bybearhands]

Some of a friend's Merchants and Marauders pieces completed.