Metal Plating - Diamond Coating Patented Product
There are many benefits in using this kind of diamond coatings for your metal plating and stamping needs. The Diamond coating increases lubrication in the die segments also used in food processing. Diamond coating will protect all of your products from corrosion. And, all of the products are both Food and Drug Administration approved and United States Department of Agriculture approved for application with food manufacturing products and equipment. One of the main benefits to using diamond coating is your stamping applications will have finer defined lines with smooth finished surfaces. And, as the dull dies are sharpened, the Diamond coating will move to the edges to smooth out the surface.To insure the best quality. In both hot and cold operating systems, your hex head trim dies will have more defined cut lines and smoother surface edges. Not only that your punch holder sets will show less wear and corrosion due to the Diamond coating anti-corrosion properties. Hot pierce punches will automatically be removed from the holes without a standard manual process. In addition, Diamond coating will prevent metal from sticking on all operation surfaces.
This Diamond coating is guaranteed not to chip, crack, break, flake or peel on metal plating surfaces. Our product is both wear resistant and corrosion resistant. It acts as a lubricant for your tools, machines and equipment. This diamond coating has been tested and is proven to work with the following applications: forming dies, draw dies, progressive dies, blanking dies, trim dies, roll thread dies, punchings, extrusions, hot heading, cold heading, and coining.
When this TDC coated metal plating products rub together and touch each other the properties of technologically designed coating will increase as well providing more protection to all of your products. These wear coatings are applied using electroplating to apply there patented chemical solution and adhesive methods. They also call this a "cool" process because the temperatures will be no higher than 160F (71.1C). These lower temperatures reduce the risk of warping and distortion caused by the head induced processes. This kind of diamond coat will bond flawlessly and securely to the surfaces of your tools, machines and equipment.
Each tool gets individually coated and metal plated separately to match its own individual shape and design. They will take the time to hand coat each one separately instead of coating a batch of different sizes and shapes of tools at the same time. This process will ensure that your tool will be completely coated, and to the highest quality.