How to Install Vinyl Siding In 5 Easy Steps
Vinyl siding is a popular alternative to regular painting. Its offers comparably more durability and appealing looks. This long-lasting measure is affordable and easy to maintain. We'll show you how to install vinyl siding in 5 easy steps. You can save a lot of money by handling a vinyl siding project yourself.
Few Easy Steps to Installing Vinyl Sidings are:
Like all other projects, these sidings require pre-planning before the actual starting of the process. The plan includes expansion and contraction mechanism in which a gap of ¼ inch is nailed.
Step 2: Cutting Vinyl Siding
Cut each of the strips into equal size. Use snips to cut through the flanges. Continue to cut through the material, cutting the rest of the J-flange.
Step 3: Prepare The Surface
It's important to clean and prepare the wall surfaces before installing vinyl sidings. Make a chalk line across the house for the first horizontal piece. Lay out the top of the strip along the chalk line. check for level.
Step 4: Attach Starter Strip
Nail the starter strip to the house every 10 inches. Attach the trim piece under the window, cut the side trim pieces to length, and install them on either side of the window, nail the trim piece in place on top of the window.
Step 5: Siding Installation
1. Use a chalk to mark a line at the starting of the lowest corner of the wall. Nail this strip along the surface and continue installing the starter strips around the wall base.
2. Straighten up the corner posts and nail them to the adjoining walls in the top to bottom manner.
3. Nail the bottom of the first panel into the starter strip. Start the process from the back of the house and then, come towards the front.
Or if you don’t have sufficient time, you can contact a siding contractor for professional vinyl siding installation work done.