Topexwiper

[captainjackystuff]

How to Choose the Best Metal Wiper Blades for Your Car?

Metal wiper blades are an essential part of keeping your car's windshield clean and clear. But with so many different types and sizes of metal wiper blades on the market, how do you know which ones are right for your car? In this blog post, we'll give you a few tips on how to choose the best metal wiper blades for your car.

What are the metal wiper blades?

Metal wiper blades are a type of windshield wiper blade that is made of metal. These blades are designed to last longer and provide better visibility in all weather conditions. They are also more resistant to damage from debris and other objects that can strike the windshield.

While metal wiper blades are more expensive than traditional blades, they are a good investment for those who live in areas with lots of inclement weather. They can also be a good choice for those who frequently drive on rough roads or in other challenging conditions.

What are the benefits of using metal wiper blades?

If you are in the market for new wiper blades, you may be wondering if metal wiper blades are worth the investment.Metal wiper blades are made with a steel frame that is coated with a corrosion-resistant material. This makes them more durable than rubber wiper blades and less likely to crack or tear in extreme temperatures. They also have a more aerodynamic design that helps reduce wind noise.

So, if you are looking for wiper blades that will last longer and perform better than rubber wiper blades, then metal wiper blades are a good option for you.

What factors to consider when choosing metal wiper blades?

There are a few factors to consider when choosing metal wiper blades for your vehicle. The first is the size of the blades. You'll need to make sure the blades are the right size for your windshield. The second is the material of the blades. Some metal wiper blades are made with stainless steel, while others are made with copper. The third factor is the design of the blades. Some metal wiper blades have a straight design, while others have a curved design. The fourth and final factor is the price. Metal wiper blades can range in price from a few dollars to a few hundred dollars.

So, which metal wiper blade is right for you? It really depends on your budget and your personal preferences.

How to install metal wiper blades?

Installing metal wiper blades is a simple task that only takes a few minutes to complete. Follow these steps to ensure that your new wiper blades are properly installed:

Raise the blade arm away from the windshield.

Find the small tab on the underside of the wiper blade.

Lift the tab and slide the wiper blade off of the arm.

Take the new wiper blade and align the tab with the slot on the wiper arm.

Push the wiper blade onto the arm until it clicks into place.

Repeat these steps for the other wiper blade.

Once you have installed the new wiper blades, be sure to test them out to make sure they are working properly.

Tips for maintaining your metal wiper blades

Metal wiper blades are a great choice for your vehicle. They are durable and last longer than traditional rubber blades. But like all things, they require some maintenance to keep them in top condition.

Here are a few tips for maintaining your metal wiper blades:

Inspect them regularly for wear and tear.

If they start to show signs of wear, replace them immediately.

Keep them clean by wiping them down with a damp cloth.

If they get bent, try to straighten them out.

By following these tips, you can ensure that your metal wiper blades will last a long time and provide you with optimal visibility while you're on the road.

There are many factors to consider when choosing the best metal wiper blades for your car. The most important factor is the size of the wiper blades. You should also consider the type of metal, the coating on the metal, and the weight of the metal.

[captainjackystuff]

A small wiper, great effect !

For the driving in the rain, when the rain brush can not effectively remove the rainwater on the windshield glass, or the scraping is not clean, the equipment is ineffective and loses its safety. In the rainy days, the traffic accident rate caused by the unclear vision caused by the wiper is 10 times higher than usual !

To avoid this, first make sure our wipers are good enough and reliable. You don’t want to rain every time, you can only stop at the roadside and wait for the rain to stop ?

What are the advantages and disadvantages of the two types of wipers ?

In today’s era of soft flat wipers, there are metal wiper styles that occupy less market share. Some models currently use metal wipers ( topex also has some self-developed metal wipers before the blog has introduced about metal wiper blade ) . The reason is not only that it is “cheap”, but it has its own advantages compared with the soft flat wiper blade ( The best for your car ) , let us first understand :

In fact, due to the design structure problem, the soft flat wiper blade has a large improvement in aerodynamics compared with the traditional metal wiper. It can almost completely eliminate the motion jitter caused by the wind when the car is driving at high speed, so that the blade is against the glass. The wear level is reduced to a minimum, and it is better than a metal wiper in terms of noise and fit. In addition, the design of the soft flat wiper blade is simple and the structure is light and small, which has no small benefit for the extension of the life of the wiper motor .

At present, many models except for some low-end and mid-range cars, most models will not use metal wipers for cost consideration. Since the pressure of each support point of the metal wiper blade is more even, the degree of wear is also average, the friction between the wiper blade and the glass is not easy to occur, and the price is relatively cheaper due to the simple structure .

TOPEX was founded in 2006, focusing on the high-quality wiper blade, metal wiper blade, flat wiper blade, etc. If you’re interested in our products, please feel free to contact us, our email address is [email protected].

[captainjackystuff]

Common problems and solutions for wiper blades

1. There is a water band after scraping

Reasons and countermeasures :

A. The rocker arm pressure is not enough . Choose a wiper with a shorter size .

B. The wiper structure is damaged ( the movable part of the wiper blade is stuck ,

the inner shrapnel of the rubber strip is deformed ) ; straighten the rubber inner shrapnel or replace the wiper .

C. The wiper rubber is worn and replace the wiper rubber or wiper blade .

D. There are stains and dust attached to the adhesive strip .

Wipe back and forth with a wet towel to clean the rubber knife edge .

2. Fuzzy and waterline stripes

Reasons and countermeasures :

A. Improper installation , removal and re-installation: the wiper and the wiper arm should rotate flexibly .

B. The wiper rubber is worn and replace the wiper rubber or wiper .

C. The shrapnel on the inner side of the rubber is deformed , straighten the shrapnel on the inner side of the rubber or replace the wiper .

D. Dirty glass to remove dirt on the surface of the glass .

E. There are stains and dust attached to the rubber . Wipe back and forth with a wet towel to clean the rubber blade .

3. Fine water droplets shape

Reasons and countermeasures :

A. Car wax , oil stains or silicide stick to the windshield to remove the adhesions on the surface of the glass .

B. Silicone wiper rubber caused by the wiper rubber itself is normal .

4. Kata or other noises

Reasons and countermeasures :

A. After the movable part of the wiper blade is stuck and disassembled , check whether there is any foreign matter in the connecting part of the wiper blade and the wiper arm .

If there is foreign matter , remove the foreign matter . If the structure is damaged, replace the wiper blade .

B. The glass is waxy . Remove the wax on the glass .

C. The wiper rubber is aging or the structure design is unreasonable . Replace the wiper rubber or wiper .

D. The angle of the wiper arm and the glass is unreasonable , the brush head and the arm rod are not flexible , adjust the wiper arm to a suitable angle or replace the wiper .

E. The wiper arm output shaft gap is loose and replace the wiper arm or wiper connecting rod .

5. There is fog on the glass

Reasons and countermeasures :

A. Pressure dirt or car wax on the surface of the glass and rubber strips ; remove dirt or car wax on the glass and wiper rubber .

B. The wiper rubber is worn out . Replace the wiper rubber or wiper blade .

C.The wiper rubber is too soft ( the hardness is too small ). Replace the wiper rubber or wiper blade , or choose a longer wiper blade .

[captainjackystuff]

Soft Flat Wiper Blade Series Classification

Multifunctional wiper blade

TOPEX multifunctional soft flat wiper blades have the following characteristics :

There are many connectors ( adapters ) , and it can be adapted to more than 96% of the car models by just changing the adapter .

Product quality has passed ISO9001 , 2008 quality management system certification .

Using Malaysia’s high-quality natural rubber , it is resistant to aging and has a long life .

It fits perfectly with the windshield and is cleanly scraped , which effectively guarantees driving safety .

Universal wiper blade

The universal series wiper blades are designed reasonably .

After aerodynamic analysis , the unique arc can reduce the bottom wind resistance from the best angle , reduce or even completely prevent the water flow back during the operation of the wiper blades , and provide a perfect view .

In various rain and fog environments , the wiper still maintains a good wiping effect .

Soft flat wiper blades are easy to install , adapt to many models , provide a wide range of sizes , and also have the characteristics of other series of wiper blades .

OE/ Special car wiper blade

The special car wiper series products use PC , POM , PVC , and other synthetic materials . 

Made of a combination of stainless steel shrapnel and 100% natural rubber strips , the service life is three times that of ordinary wiper blade .

The product has passed ISO9001: 2008 quality management system certification.

It is portable and safe, long in service life , stable in scratching, and easy to install and uninstall .

Hybrid wiper blade

The special diversion structure design can provide proper pressure while minimizing wind resistance .

Intelligent automatic adjustment of the pressure elastic structure , evenly distributed to each part of the rubber , the scraping effect is unparalleled .

Wiper blade joints can be applied to more than 99% of cars .

Rear wiper blade

The rear wiper blade is made of a variety of composite materials through multiple processes according to the characteristics of the rear window of different models .

Long service life , quiet operation , clean scratch test , easy disassembly and assembly .

The flexibility and elasticity of the material can meticulously care for the glass , improve driving comfort and ensure driving safety.

[captainjackystuff]

List of common problems of wiper blades

High-quality wiper blades must have cold resistance , heat resistance , acid and alkali resistance , and corrosion resistance .

Closely fits the windshield , reduces the burden on the motor , low noise , strong water repellency , soft and does not scratch the windshield , etc .

It can broaden your horizons and look new, and bring you into a new experience of ” clean and silent ”  ; driving safety is guaranteed .

Because the wiper blades are only used when it rains , many people ignore the service life of the wiper blades .

Wiper blades need to be replaced every six months to a year to ensure driving safety .

List of common problems :

⇒ About wiper blades

1. Ribbon

Inappropriate arm pressure or damage to the upper structure , or even improper installation of wiper blades .

2. Foggy

An oily film is distributed on the windshield along with the action of the wiper , usually because of dirt or car wax .

This phenomenon can also occur when the rubber is contaminated .

3. Bead-like

When the wiper sweeps the windshield , some small water droplets stick to the glass surface .

This phenomenon is caused by the car wax or silicide sticking to the windshield or the rubber sheet itself .

4. Kata or other noise

Occurs when the wiper blade is scraped irregularly , mostly due to rubber wear , and the arm rod damages the rubber deformation .

5. Blur and streaks

There are many reasons for this phenomenon , such as improper installation of wiper blades , wear of rubber or dirty glass .

6. Ascension phenomenon

According to the principle of aerodynamics , long wiper blades are more prone to lift up .

When the wiper wipes across the surface of the windshield , it will rise due to the wind , causing part of it to not be swept . This phenomenon occurs .

When the common problems listed above occur to the wiper blade , the owner does not solve it in time , and your wiper blade will be further worn and deformed , resulting in damage to the wiper blade .

Car wiper is one of the most important tools for driving safety , especially on rainy days . Remember to solve the problem in time .

[captainjackystuff]

Does the wiper blade squeak the glass ?

When you are driving on the road on a rainy day, do you still notice your windshield wipers creaking on the windshield , even if there is heavy rain to push it away ?

You will hear that windshield wipers do this for several reasons , and you should always fix the problem .

The squeak is bad for the windshield wiper blade or the windshield itself !

1.  Wiper blade squeaks during operation :

it means that the wiper frame is twisted upwards .

If it becomes downward , it needs to be twisted in the opposite direction until the abnormal noise is eliminated .

2. Wiper blade itself problems :

It will crack , age , and become hard after a period of use .

The simplest and most effective way is to replace the wiper blade with a new one .

3. There is a foreign body between the wiper blade and the windshield :

The sharp sound of friction between the wiper blade and the front windshield glass , the owner can check and clean the wiper blade or foreign matter under the wiper to ensure that the wiper blade is clean .

4. Linkage mechanism :

The deformation of the mechanism or the influence of the motor , gap relay , etc. may cause abnormal noise .

In addition , due to the long time of use , the mechanism deforms , freezes , rusts , and so on .

5. The angle of the wiper blade/arm :

The angle of the wiper blade and the wiper arm is incorrect ,

which causes the wiper blade to jump on the windshield , causing abnormal noise .

How to stop the windshield squeaking !

It is difficult to determine the exact cause of the problem , but what you really want to know is: How do I stop it ?

Cleaning the windshield wiper blade

The best way to prevent the windshield wiper blade from squeaking is to wipe the windshield wiper blade with vinegar regularly to prevent dust accumulation or other contamination .

Just dip the cotton cloth in the vinegar and try again .

You can also use baking soda mixed with water to clean the windshield wiper blade .

Replace your wiper blade refills

Roughly once a year , particularly in the Spring / Summer when it ‘ s really rainy , you should change your wiper blade refills .

Helps prevent the wiper blade from creaking on the windshield .

Keep the wiper blades soft

Your windshield wipers should not be too wet or too dry-either way , they will be damaged .

To keep the wiper blade soft , you can use rubbing alcohol to clean the blade .

Over time, the rubber loses its elasticity , deforms , and no longer fits the shape of the windshield .

This can cause the wiper blade to creak on the windshield .

In addition , as the wiper blades age, you should replace the entire wiper assembly .

[captainjackystuff]

Benefits of Silicone Wiper Blades

Silicone wiper blades are becoming more and more popular , mainly because of their durability advantages over rubber wiper blades .Benefits of silicone wiper blades are as follows：

Durability : The main benefit of silicone wiper blades is that they can last anywhere from 2-3 times longer than rubber , especially in harsh operating environments .

Performance : Silicone polymers offer a performance advantage across a broader range of temperatures and conditions than conventional rubber wiper blades .

Protection : Silicone wipers leave a thin water-repellent coating as they work , which helps clear the windshield of water around town and at highway speeds .

How long can the silicone wiper blades last ?

Standard rubber blades are generally used for six months to one year , especially in areas where the environment changes drastically every year , and wipers need to be replaced regularly . 

The topex brand has incorporated advanced technology into its rubber blades to extend the service life to one year or more .

On the other hand , silicone blades are more durable than most standard rubber blades .

As compared to rubber, silicone is more durable and resistant to high temperatures and moisture , so they can provide a longer service life for the wiper , thereby extending the service life by two times or more .

Generally , silicone wipers need to be replaced every year or every two years .

What Are the Different Types of Silicone Wiper Blades ?

There are three main types of silicone wiper blades , similar to rubber blades .

These windshield wipers are classified according to design or frame construction, and you can quickly identify which type a wiper blade belongs to with a quick glance at the exterior aesthetics of the wiper .

Conventional Silicone Blades

If you’ve been driving for more than two decades , then the type of wiper blade you’ve been accustomed to is the conventional bracket-type wiper blades .

These wipers have steel frame construction with three or four blade claws that provide the pressure points to tightly attach the blade to the windshield. Also called frame-type wipers , they are more efficient in handling mudded windscreens and are perfect for off-road vehicles regularly exposed to heavy dirt that turns to mud during rain.

Despite the old-fashioned style and design, conventional blades remain popular today and are commonly used by most automakers for their standard models .

Beam Silicone Wiper Blades

In contrast to the traditional bracket-type wipers , another type is the frameless beam blades made of rigid silicone rubber. Since they have no metal claws , beam blades are more flexible and easily adhere to the curvature of the windshield , thereby resulting in more efficient wipes .

Beam-type wipers started in the early 2000s and were first introduced in luxury cars . Since then , luxury brands and most automakers use beam blades for their high-end models due to more expensive costs .

Beam wipers are better at handling all weather conditions , even in snow time during winter .

Hybrid Silicone Wipers

Hybrid wipers combine the best of two worlds with metal brackets to provide sturdier support added with aerodynamic beam cover for an extra layer of protection during bad weathers and from road contaminants during the daily drives .

They are generally more expensive compared to the other types . Just like beam blades , hybrid wipers are common in luxury cars and superior models .

Other Considerations

Driving Climate . Silicone can handle a lot more punishment than conventional rubber .

Consider the silicone advantage in extreme weather regions .

Frame Type . Most automobiles work best with the wiper frame they left the factory with . Exceptions to the stock rule are determined by universal connector design .

Hydrophobic Coating . Silicone wiper blades leave a coating similar to silicone windshield treatments . If you’re not a fan , then silicone wipers are not the best choice .

If your car is equipped with frame wipers when it leaves the factory and long-term durability is the primary consideration , please consider Topex Silicone wiper blade .

https://www.topexwiper.com/category/other/silicone-wiper-blade

Upgrading to silicone windshield wipers can be a considerable investment , so weigh the cost based on your location , driving style , and how long you want to keep current driving. For some people, silicone wiper blades are not worth buying; for others, they will be a key upgrade .

In any case , driving safety is the top priority .

[captainjackystuff]

Common problems and solutions for wiper blades

1. There is a water band after scraping

Reasons and countermeasures  A. The rocker arm pressure is not enough . Choose a wiper with a shorter size.

B. The wiper structure is damaged (the movable part of the wiper blade is stuck,  the inner shrapnel of the rubber strip is deformed ) ; straighten the rubber inner shrapnel or replace the wiper.

C. The wiper rubber is worn and replace the wiper rubber or wiper blade.

D. There are stains and dust attached to the adhesive strip.

Wipe back and forth with a wet towel to clean the rubber knife edge.

2. Fuzzy and waterline stripes

Reasons and countermeasures

A. Improper installation , removal and re-installation: the wiper and the wiper arm should rotate flexibly.

B. The wiper rubber is worn and replace the wiper rubber or wiper.

C. The shrapnel on the inner side of the rubber is deformed , straighten the shrapnel on the inner side of the rubber or replace the wiper.

D. Dirty glass to remove dirt on the surface of the glass.

E. There are stains and dust attached to the rubber . Wipe back and forth with a wet towel to clean the rubber blade.

3. Fine water droplets shape

Reasons and countermeasures

A. Car wax , oil stains or silicide stick to the windshield to remove the adhesions on the surface of the glass.

B. Silicone wiper rubber caused by the wiper rubber itself is normal . 4. Kata or other noises

Reasons and countermeasures

A. After the movable part of the wiper blade is stuck and disassembled , check whether there is any foreign matter in the connecting part of the wiper blade and the wiper arm.

If there is foreign matter , remove the foreign matter . If the structure is damaged, replace the wiper blade.

B. The glass is waxy . Remove the wax on the glass.

C. The wiper rubber is aging or the structure design is unreasonable . Replace the wiper rubber or wiper.

D. The angle of the wiper arm and the glass is unreasonable , the brush head and the arm rod are not flexible , adjust the wiper arm to a suitable angle or replace the wiper .

E. The wiper arm output shaft gap is loose and replace the wiper arm or wiper connecting rod.

5. There is fog on the glass

Reasons and countermeasures 

A. Pressure dirt or car wax on the surface of the glass and rubber strips ; remove dirt or car wax on the glass and wiper rubber.

B. The wiper rubber is worn out . Replace the wiper rubber or wiper blade.

C.The wiper rubber is too soft ( the hardness is too small ). Replace the wiper rubber or wiper blade , or choose a longer wiper blade.

[captainjackystuff]

Why Buy Windshield Wipers？

Improve road safety. Like brake pads, windshield wipers are maintenance items that require replacement before they cause more severe problems. Scored windshield glass is a minor annoyance compared to the potentially catastrophic result of poor visibility at 100 feet per second. 

Worn out wipers.  Windshield wipers wear out as they work, and they have a tough job. They are always on-call and ready to leap into action to clear water, snow, ice, and smashed bug guts from your windshield. Replace your wipers before they retire. 

Severe duty. Harsh operating environments demand more frequent wiper blade inspection and replacement. Dusty deserts, seaside salt, relentless sunshine, and long winters can finish off wipers before their time. 

BEST WINDSHIELD WIPER TESTING CRITERIA 

We tested over a dozen pairs of wiper blades in simulated and real-world conditions on flat and curved windshields. This custom-built dual nozzle sprayer served as the simulated part of our windshield wiper testing. The static test is not entirely accurate, as there is no air moving across the windshield, but it gave us an inside and outside look at the wipers in action. We couldn’t find a giant fan or wind tunnel anywhere around here, so supplemental road testing through driving rain and swarms of bugs rounded out the best windshield wiper review.

FIT TO FINISH

Here’s a quick word about the product links to our review favorites. All of our test wipers were 16” bayonet mount, but unless you drive an old Montero or Toyota Starlet, the right size and type of wipers for your vehicle are different. Look up the correct size and type for the make, model, and year of your vehicle. Measure each wiper blade and note the connector type. The right connector makes the difference. A poor connection between the wiper arm and blade will result in poor performance. Today’s crop of windshield wipers falls roughly into the three categories. 

Windshield Wiper Types

FRAME WIPERS

Frame wipers have an articulated steel or composite frame structure. Hinges in the frame distribute pressure across the blade through four to eight claws. Frame wipers are also known as conventional, standard, or traditional. Up until a few years ago, the frame wiper was the most common type. The frame and claw design was initially designed so a worn rubber blade could be swapped out with an inexpensive refill. Most drivers replace the entire assembly as a unit today. 

BEAM WIPERS

Beam wipers get their name from the continuous spring steel beam that replaces the standard steel frame and claw structure. The pre-stressed steel ribbon eliminates pressure points for even pressure across the entire length of the blade. The low-profile design helps prevent high-speed chatter. Beam-type wipers excel on modern low-slope compound curve windshields and are standard equipment on the majority of new vehicles. 

HYBRID WIPERS

hybrid wiper blades bring features of frame and beam wipers together. Each manufacturer has a slightly different idea of what a hybrid wiper is, so the category is less clear cut. Some hybrids combine a conventional steel frame wiper with a protective aerodynamic shell. Others add articulated all-weather armor to beam-style wipers to help fight off heavy snow and ice. Improved aerodynamics, all-weather performance, reduced noise, and four-season durability are some hybrid advantages.

[captainjackystuff]

What is the correct wiper when driving in winter？

Make sure you use the correct wiper when driving in winter

Most of us have forgotten the importance of wipers until the dazzling glare through a dirty windshield, heavy rain or damp snow suddenly reminds you that you need to replace it. Clear vision is an important part of safe driving. The correct selection of wipers and timely maintenance may have a huge impact on the safe operation of the vehicle.

We often match the factory standard wipers of their vehicles when replacing worn blades. This is not necessarily because it is our preference. Usually because we don't know that there are different blade style choices that will bring obvious visual and performance advantages.

Winter can release severe weather in many parts of the United States, especially the Northeast and Midwest; although it seems that most parts of the country have been affected recently. The right wiper will provide all the difference for safe driving in areas that suffer from heavy snow, freezing rain and long seasons of sleet.

Hybrid wiper blade combines the best features of frameless and traditional style wipers

Traditional articulated wiper blades perform well in rain, and beam (or flat) wipers have a sleek appearance and produce clean wiping effects, while hybrid wipers are designed for extreme weather. The hybrid windshield wiper combines the most beneficial functions of the beam and traditional wiper without the problems associated with the exposed metal frame. By combining the stability of traditional spring-loaded blades with modern design and the versatility of beam blades, hybrid windshield wiper blades can provide optimal performance in harsh winter climates.

Like traditional wipers, the robust frame of the hybrid wiper provides the durability and balanced pressure required for stable windshield contact and streak-free cleaning. Similar to the beam wiper, the hybrid windshield wiper has a stylish aerodynamic design. Will particularly like the frame and suspension system with a protective cover that prevents manual removal of snow and icing. The rigid structure of the hybrid windshield wiper blade can lift heavy slush and is not easy to break due to dense ice and snow.

[captainjackystuff]

Wiper blade description

There are many different types of wiper blades, such as: standard wiper blade, spoiler wiper blade, flat blade, flat blade upgrade (or modification). Here, we have some explanations of the different types and their uses and applications. Not every wiper blade can be used on every type of vehicle-so please use our vehicle search to find the right wiper blade type for your car.

Standard (or conventional) wiper blades

Standard wipers are the most common type of windshield wipers, often referred to as looking like hangers, and are still installed on most new cars, although this situation is declining. They are usually connected to the vehicle using hook-shaped wiper arm accessories. The size ranges from 10" to 28", and it is not uncommon to install different sizes on the driver and passenger side of the windshield. If you have installed these parts, you can easily replace them with another set of standard wiper or new flat wiper blade upgrades-as described below.

Spoiler wiper blade

These types of wiper blades have full spoilers that extend the length of the blade. This helps bring the blades closer to the windshield at higher speeds, and is usually only designed for the driver's side. Likewise, they are usually fixed to the vehicle by hook-shaped wiper arm fittings.

Modified flat wiper blade upgrade

The plane wiper blade has a brand-new style and technology, and quickly becomes the standard configuration of new cars. These types of wipers do not have a metal "hanger" shaped frame. Instead, they have tensioned metal strips inside the rubber structure of the wiper. This design makes the aerodynamic shape flatter, thereby reducing wind noise. The internal metal strip exerts constant pressure along the length of the blade and has a built-in spoiler. Compared with the traditional wiper, it is smaller and obstructs the driver's vision.

Hybrid wiper blade

Hybrid wipers combine the aerodynamic shape of flat blades with the sturdy structure of conventional wipers. The hinged plastic frame forms the aerodynamic "skin" of the wiper. This can make the air flow smoother, which in turn produces a uniform downward force over the entire length of the blade. Under this skin is a steel substructure, which provides a firm support for the rubber wiper element. The ingenious design allows the entire wiper to be bent to the shape of the windshield, resulting in a smooth, efficient and quiet wiping action.

Flat wiper blade

The plane wiper blade has a brand-new style and technology, and quickly becomes the standard configuration of new cars. These types of wipers do not have a metal "hanger" shaped frame. Instead, they have tensioned metal strips inside the rubber structure of the wiper. This design makes the aerodynamic shape flatter, thereby reducing wind noise. The internal metal strip exerts constant pressure along the length of the blade and has a built-in spoiler. Compared with the traditional wiper, it is smaller and obstructs the driver's vision.

If your vehicle is newly installed with these types of wiper blades, you can only replace them with similar types of flat blades. They will not have hook-shaped wiper arm accessories. The most common types of wiper arm accessories for flat wiper blades are "side pin", "bayonet", "pinch blade", "button" and "slider".

Wiper blades of specific size

Dedicated Fit wiper blades are usually substitutes for original equipment and are designed for specific vehicles. Many rear wipers are unique in design and need to be replaced with this type of wiper. We also provide double packs for the front of certain vehicles that require curved wipers, uniquely shaped spoilers or special accessory adapters. They can be regular or flat wipers and will be shown in your car's list of available wipers when applicable.

Rubber refill

The refill contains only the rubber part of the wiper blade and is intended to replace the existing rubber element. However, simply replacing the refill is a low-cost alternative to replacing the wiper blade. Replacing the entire blade is usually easier, faster, and usually produces better results. Avoid changing the refill too many times, because the upper structure of the wiper blade will become weaker over time. These refills cannot be used to refill the new flat wiper blades.

[captainjackystuff]

Car and LCV wiper blades

Conventional/flat wiper blade

flat wiper blade is the most common type of windshield wipers, often referred to as looking like hangers, and are still installed on most new cars, although this situation is declining. They are usually connected to the vehicle using hook-shaped wiper arm accessories. The size ranges from 11 inches to 28 inches, and it is not uncommon to install different sizes on the driver and passenger sides of the windshield. If these parts are already installed, they can easily be upgraded with another set of standard wipers or new flat wiper blades.

Retro wiper blade

The plane wiper blade has a brand-new style and technology, and quickly becomes the standard configuration of new cars. These types of wipers do not have a metal "hanger" shaped frame. Instead, they have tensioned metal strips inside the rubber structure of the wiper. This design makes the aerodynamic shape flatter, thereby reducing wind noise. The internal metal strip exerts constant pressure along the length of the blade and has a built-in spoiler. Compared with the traditional wiper, it is smaller and obstructs the driver's vision.

Multiple direct fit (MDF) and direct fit (DF) wiper blades

The plane wiper blade has a brand-new style and technology, and quickly becomes the standard configuration of new cars. These types of wipers do not have a metal "hanger" shaped frame. Instead, they have tensioned metal strips inside the rubber structure of the wiper. This design makes the aerodynamic shape flatter, thereby reducing wind noise. The internal metal strip exerts constant pressure along the length of the blade and has a built-in spoiler. Compared with the traditional wiper, it is smaller and obstructs the driver's vision.

If your vehicle is newly installed with these types of wiper blades, you can only replace them with similar types of flat blades. They will not have hook-shaped wiper arm accessories. The most common types of wiper arm accessories for flat wiper blades are "side pin", "bayonet", "pinch blade", "button" and "slider".

Hybrid wiper blade

Our hybrid wiper blade combines the performance of a traditional wiper blade with the aerodynamic characteristics of a jointless wiper blade, which is suitable for both OE replacement and traditional upgrade. The hybrid wiper blade is composed of a metal frame with multiple pressure points and a linked plastic spoiler that reduces lift, thereby providing streak-free wipes on the entire screen.

Heavy commercial wiper blade

We also provide a complete set of heavy-duty commercial wiper blades. These include a total of 21 wiper blades ranging in size from 20" to 40" with the necessary arm adapter accessories. These include the required 9×3mm / 9×4mm / 12×4mm / 16×6mm hook types, different cleaning and wiping nozzle types-13mm / 17mm / 22mm / 25mm / 27mm and nut and bolt types.

Plant wipers

Our plant wiper blades and shovel arms series are ideal for customers who wish to replace wiper blades on forklifts, cranes, excavators and other similar vehicles.

CCTV wiper blade

We can provide series or CCTV camera wiper blades that fit your custom specifications. Whether you are looking for a rubber wiper blade for wet weather conditions, or a brush wiper blade that is more suitable for dusty/Sandy environments such as desserts.

[captainjackystuff]

Most complete wiper blade maintenance - TOPEX

The wiper blade is not conspicuous in the parts of the car , but it plays an irreplaceable role in the safe driving , especially in the rainy and

The wiper blade is not conspicuous in the parts of the car , but it plays an irreplaceable role in the safe driving ,

especially in the rainy and snowy weather .

♥  Avoid dry brush  ♠

The windshield is stained with dust and sundries .

Do not use wiper dry brush directly , otherwise the wiper blade will be damaged .

Solution : Remove clutter ; Wash with water glass .

[captainjackystuff]

Wiper blade case analysis - TOPEX

Question : How did the wiper blade I bought from you last time not clean ? Error response : ( Comments and customer messages ) 1 、That ' s

Question : How did the wiper blade I bought from you last time not clean ?Error response : ( Comments and customer messages )

1 、That ‘ s impossible . Our wiper blades are the best .

( Language evasion , customers never like businesses that shirk responsibility )

2 、Have you used it too long ?

(  It ‘s a relatively good way to ask customers about their usage , but this sentence is not attractive enough .

It ‘s easy for customers to respond first with ” I haven ‘ t spent long .”

3、The wiper has been used like this for a long time

.

( Some customers may not jump to conclusions without the cause of the actual problem , but in your description ,

you ca n’task the same problem to oppose him every time a customer asks a question , so that expression will be difficult . )

[captainjackystuff]

Do you use the right wiper blade ? - TOPEX

Can I use washing liquid ( dish washing liquid ) ? ? The dishwasher cleaned the front windshield . After a period of time , the wiper blades

Can I use washing liquid ( dish washing liquid ) ? ?

The dishwasher cleaned the front windshield .

After a period of time , the wiper blades due to the cleaning agent found that the progress of the aging of the wiper blades

has accelerated , and it is not as durable as before .

( Even abnormal noises appear . )

Therefore : Special cleaning agents are used for cleaning .Summary : Improper selection of glass cleaners will accelerate wiper aging .XIAMEN TOPEX AUTO PARTS CO.,LTD

(TEL)86-592-2918292 ,6388105

E-MAIL: [email protected]

WEB: https://www.topexwiper.com

We are now looking for Global Distributors , Welcome to cooperate with us !

[captainjackystuff]

Automobile Industry | BMW replaces the new logo ! - TOPEX

How will BMW change its logo in 2020 ? Well-known German car brand BMW Recently , along with their electric concept car i 4 ,

How will BMW change its logo in 2020 ?

Well-known German car brand BMW

Recently , along with their electric concept car i 4 ,

Released a brand new logo ,

Replaces the old logo that has been used since 1997 .

[captainjackystuff]

Wiper Blade : Three second knowledge - TOPEX

How often should the windshield wiper blade be replaced . The typical life of a windshield wiper is one year . The life of flat wiper

How often should the windshield wiper blade be replaced .

The typical life of a windshield wiper is one year .

The life of flat wiper blade may extend somewhat , but few wipers last two years .

After summer exposure and winter cold , wiper rubber can age and crack ；

When the use of wipers found that there are residual stains on the glass 、 strip marks 、 shaking and abnormal sound .

It is necessary to replace the wiper blade .