we always knew the HD pen was tough so we decided to place it in a battle of EPIC proportions. The HD pen vs the Grim Reaper Monster Truck! Watch this video to see the victor!
Aluminium & Detectable Plastic Magnetic Clipboards & Ring Binders
The new Detectamet range of magnetic ring binders and clipboards are highly suitable for presenting A4, A3 or A5 documents in portrait or landscape orientation. The magnets are extra stiff so they do not slide over the surface and can stick to any ferrous surface such as whiteboards, machines or cabinets
Manufactured from either anodised aluminium or metal detectable & x-ray visible plastic in a range of 9 hygiene colours.
Can be fitted with detectamets full range of clipboard clips and ring binder mechanisms.
Magnetic ring binders and clipboards can be used when implementing visual management on the work floor. They are suitable for environments such as the following:
Visualisation of One Point Lessons on a machine
Presentation of production results
Archiving and communication of improvement suggestions on an improvement board.
Please contact our Sales Office on Tel +44 (0)1759 304200 or email [email protected] for further information.
Metal Detectable Retractable 'Cryo' Pens With Pressurised Refill
"Super X" - Made using Detectamet's unique metal detectable polymer which is X-Ray visible and has the added bonus of an anti-microbial agent, as well as being extremely metal detectable.
Pressurised 'Cryo' Refill - Detectamet's highest grade refill. Will continue to write until the ink has run out in almost all conditions.
Can write upside down - Ordinary ballpoints usually lose the will to write even when held horizontally.
Ideal for use in wet & greasy conditions - Ordinary ballpoints start skipping because the ball won't rotate properly or grease or water stops conventional ink sticking to the ball, a pressurised 'cryo' refill just keeps on working.
Write in very low temperatures - Useful in very cold weather conditions but also useful in commercial cold-storage. Ordinary pen ink will solidify, but a pressurised refill will keep going at minus 20 degrees celsius.
Detectamet Retractable pens are suitable for almost all food applications, including environments with greasy and powdery conditions. This pen performs well in both warm and lower working temperatures, and will not damage if dropped or rolled off work surfaces.
The Detectamet Metal Detectable Pen housing is conforming to the standard Regulation EC 1935/2004 on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC.
Detectamet "Super X" Pen Housings Offer The Following Benefits:
Enhanced Detectable Properties
X Ray Visible
Minimum Parts
Impact Resistance
User Friendly
Design Choice of Colours
Can be used as part of HACCP
Cost Effective
Environmentally Friendly
Easy to clean
Supplied with RED end cap as standard.
Detectamet Super X Retractable Pens can be re-filled!
Refills made to ISO12757-2 (The International Organization for Standardization published standards for ball point and roller ball pens)
Please contact our Sales Office on Tel +44 (0) 1759 304200 or email [email protected] for further information.
The BRAND NEW 10 sheet non detectable Stapless Stapler is now here!
You'll never need to buy a pack of staples again with the Detectamet staple-less stapler. Fasten several sheets of paper without the use of a conventional metal staple. Rogue pieces of metal in finished products continue to be an issue in the food industry. Although detection equipment is now widely used and effective good manufacturing practices are applied the numbers of incidents getting through to the consumer is still too high.
In a report of metal frequently found in food, metal staples are fourth on the list. This is a solvable challenge. Specifications for ingredient packaging can prohibit the use of staples replaceable with alternative fastenings. The bigger challenge is the control of staples used in papers.
The simple solution is to make the food processing areas into staple free zones. No staples are allowed within the food processing area. However, unstapled essential documents coming into or going out of these areas can be a challenge. Without any fastening the instructions, records and traceability information could become loose and mislaid.
Detectamet have resolved the problems of loose sheets with their stapleless staplers. These simple machines mechanically cut and push a small tongue of paper through the sheets and into a slit so that the papers are securely stitched together. The result is no bits of metal and no loose pieces of paper.
Please contact our Sales Office on Tel +44 (0)1759 304200 or [email protected] for further information.
Clip boards are synonymous with organisation and tidiness. Yet where do you keep them so they are out of the way and immediately to hand? The new Detectamet wall mounted stainless steel clip board or file holder can be easily installed on a handy wall or partition.
There are two ready to use sizes designed to take A4 or A3 sized clipboards or files. The high quality 304 grade stainless steel is of a high hygiene standard. Produced in Britain, the A4 and A3 units can be tailor made using 316 grade stainless steel and special dimension units can also be made to order.
Each unit is pre-drilled with two keyhole screw points for easy fitting. The DetectametLaser engraving service is available for placing company name, logo or usage instructions on the front panel.
The A4 unit measures 247mm x 243mm x 40mm (approx. 9 3/4" x 9 1/2" x 1 1/2") and will hold two or three A4 clip boards. The A3 unit will hold five or six A4 clip boards or three A3 and measures 250mm x 490mm x 40mm (approx. 9 3/4" x 19 1/4"x 1 1/2").
Please contact our Sales Office on Tel +44 (0) 1759 304200 or email: [email protected] for more information.
Nearly 12 years ago in a small East Yorkshire village a company was launched that has become one of the world’s leading suppliers of detectable safety and hygiene equipment for the food beverage and pharmaceutical industries.
Sean Smith and Angela Musson-Smith established E-Components & Chains as an engineering company with its core business supplying Conveyor Components and Chains Change Parts and Feed Scrolls to the food and drink industry. The success of ECC led to visits to many food companies and meetings with key technical staff. Regular references by these food producers to the need for metal detectable plastic equipment to preserve their machinery and protect their products and their customers from the dangers of cross contamination highlighted a potential demand that the company could satisfy.
With their foresight and drive the founders saw an important opportunity which their company should take. It would take advantage of Sean’s experience of over thirty years in the plastics industry meeting the challenges and resolving the puzzles of supplying the food and pharmaceutical industry with plastic products.
The first product group in ECC’s metal detectable plastic equipment was a range of stationery. It was on the market by early 2004 and quickly generated a high demand from the UK food industry. Ten years ago the UK was established as leading the world in building food safe processing systems and practices. Food producers needed to use several plastic products in and around the production area, but knew the risks of them falling into the food mixer, breaking and ending up in the finished product.
With most food processing companies already checking their finished products using a metal detector it meant that these metal detectable tools or their parts would be found and the contaminated product rejected.
By now the company had moved into an industrial unit on the Pocklington Industrial Estate from where it could despatch its products, and in less than a year it exhibited its first detectable plastic products at the Total Show in Birmingham. “We met potential customers and demonstrated the product, “says Sean” It was also an opportunity to discuss their needs for other detectable product.”
“We grew so rapidly in this sector” Angela explained “that the core of the business had changed and I realised that the brand we had established – Detectamet was how our customers referred to us and we changed our name to reflect this.” So the company name changed to Detectamet Limited. The company’s ranges now include metal and X-ray detectable tools and equipment, stainless steel and aluminium products, detectable engineering products and personal protective equipment.
Detectamet now has a multimillion pound turnover in products that are despatched daily around the world. From that first start nearly 12 years ago the company now supplies over 234 products and product groups that range from the original pen design through to the latest detectable plastic tools and stainless steel stationary and dispensing products. On any day for example products are being despatched as wide afield as Australia, New Zealand, Germany, France, Italy and the USA, and turnover has increased every year since 2003.
Detectamet products are now sold in over 100 countries because safer food production is now demanded around the world and food producers value the assurance of detectability. “It has not been straightforward” says Angela “We have had to prove compliance with international standards for plastics in contact with food, and now satisfy the EU and US regulations”
The company now employs a team of IT specialists who have developed web sites to inform and sell products. There is a sales team which provides direct contact with UK and overseas customers, plus a manufacturing team who assemble, pack and despatch the products.
When asked to pick out some highpoints of the past 12 years Sean said that he will not forget being asked by a major multiple retailer to talk to their suppliers about the benefits of using metal detectable tools. “They are the front runners in food product quality and safety” he said “and to be invited by them was a quite a landmark”. Another milestone was when the first major international food production plc called a meeting to explain that it wanted its manufacturing sites around the world to use Detectamet products.
Angela says that before the announcement of the Queens Award for Enterprise one of her proudest moments was achieving ISO 9001:2008 and thereby demonstrating the abilities of the Detectamet team to achieve the highest levels of service and efficiency to meet their customer's requirements. “I started the process with the belief that we would certainly satisfy the criteria but then realised that we had more to do to raise our standards even further and put the systems in place to maintain them”
Together they agreed that the takeover and incorporation of the company CK Safety into the Detectamet group was another major milestone on the journey to success. CK Had built a reputation for producing metal detectable personal protective products. “These fitted like a glove into our product range” said Angela
“It has been an exciting and rewarding ten years” says Sean “and it doesn’t look like slowing down. We have launched seventeen new products since April last year and there are more on the way.”
The company continues to change and adapt. With Angela as Managing Director and Sean as CEO their strategy continues to be the expansion of the company’s sales overseas into Asia and the America’s. “We are presently preparing to open offices in the USA to improve our efficiency in satisfying that growing market whilst our sales team follow up on the contacts we made when exhibiting in Germany in March.” Sean explained.
Detectamet has been able to continue its growth through difficult international economic circumstances. “The company started with limited funds – savings, hard work and goodwill.” Angela remembers. “The company had no financial support from the bank and never traded with an overdraft. We continue to work to a similar ethos of low borrowing.”
The company has come a long way since that first detectable plastic pen. They now have hundreds of different detectable products that are used throughout food production areas. They even have pens that will work under water, work in a deep freeze and can write in space.
You can now match the colour of the clip to the colour of the metal and X-ray visible plastic clipboards. You can pick red, yellow, green and blue clips with matching boards and specify one of three sizes - A5, A4 or A3.
The powder coated stainless steel clips can be fitted to suit your specific needs in a portrait or landscape orientation, The rugged material is lightweight, sturdy and easy to clean, and fulfils the EU and US FDA requirements for materials in safe contact with food.
Available in 3 sizes (Landscape or Portrait):
A3 - 350mm (13 1/2") x 460mm (18")
A4 - 230mm (9") x 320mm (12 1/2")
A5 - 180mm (7") x 230mm (9").
Product details:
Metal detectable
X-Ray visible
Landscape or Portrait orientation
Extremely lightweight
Ideal for production area environments
Ability to wipe clean
More comfortable to hold than Stainless Steel when used in a cold environment such as a freezer or cold store
Heavy Duty Stainless steel clip can be laser engraved with your company details
Please contact our Sales Office on Tel +44 (0) 1759 304200 or [email protected] for further information.
What are detectable products and why should I be using them in my production areas?
Detectable products are your first line of defence in food safety.
Ten years ago the UK was established as leading the world in building food safe processing systems and practices. Food producers needed to use several plastic products in the production area, but knew the risks of them falling into the food mixer, breaking and ending up in the finished product.
With most food processing companies already checking their finished products using a metal detector it meant that these metal detectable products or their parts would be found and the contaminated product rejected.
By introducing the simple policy of ordering tools and equipment that are made entirely of detectable materials, food processors can establish another critical control point based upon the use of metal detectors or X-ray systems.
Why use Detectamet Detectable Products?
Detectamet has become established as one of the world’s leading manufacturers and suppliers of detectable safety and hygiene equipment. Within the food, beverage and pharmaceutical industries their range of products is second to none.
Detectamet’s product range has grown to be the largest in the world.
Detectamet detectable products are now sold in over 40 countries because safer food production is now demanded around the world and food producers value the assurance of detectability.
The company has come a long way since their first detectable plastic pen 10 years ago. They now have dozens of different detectable products that are used throughout food production areas. They even have pens that will work under water, work in a deep freeze and can even write in space!
pixelskylines
dededos
jbbartram-illu
stormborns
janainaart
gummygunk
discoholicmusic