Untitled

[ethanallen-blog]

Fireplace Insulation Material

Lindemann Chimney Supply offers a wide collection of chimney insulation & fireplace insulation materials including Foil Faced Ceramic, Un-Faced Ceramic Insulation Blanket.

To Know More About Fireplace Insulation Material Visit us..

[ethanallen-blog]

Buying the Right Chimney Insulation Material

Chimney insulation material is going to vary based on your needs and how much you want to spend on it. There are two main types of materials that you can choose from - mix that you pour down into the chimney itself, and then chimney wrap around blankets. Both of them have pros and cons that need to be considered, so we're going to take a closer look at both of them here.

The pour down chimney insulation material is the more commonly used, mainly because it ends up costing a lot less than the blankets do. Like any other type of poured insulation, all you have to do is mix the material with some water, and then you pour it down into the inside of your chimney, in between the liner and the chimney bricks. You have to allow it to sit for awhile before you actually go ahead and use the chimney; many people recommend that you wait up to a week. If you don't think that you're ever going to change the insulation or take it out, the pour down option may be what you've been looking for. It lasts a good long while and will help to keep the chimney insulated, no matter how warm it gets inside the chimney or how cold it gets outside of it. Finding that perfect balance can be hard, but with years of advancements, pour down chimney insulation material definitely gets the job done correctly the first time. Your other option is the blanket, which is well known for its ability to hold up to temperatures over 2,000 degrees (Fahrenheit). That means it can pretty much fight against anything that you throw at it - and that's a feat for any sort of blanket. These are a little more complicated to put in and, as mentioned above, it can end up costing you a little bit more in the long run as well. You just place it in the same area that you would dump the pour down material into. The big advantage to this type of chimney insulation material is that it is easy to take out, so if for some reason you have to remove it in the future, you will have a much easier time doing so in the long run if you go with this sort of material, because you'd have to do a lot of scraping with the product that you just pour in. So, as you can see, there are quite a few things that you're going to want to think about when it comes to trying to find the right chimney insulation material. Talk to your professional Chimney Insulation Material specialist to learn more about your options and to figure out how you should move forward with your chimney installation. They can give you a look into all of the options that are available and help you to feel more comfortable with whatever it is that you decide to go with. To Know More About Chimney Cleanout Door Visit us.. Source : Click Here

[ethanallen-blog]

Finding the Right Chimney Brushes and Rods

One of the things you can do is sweep it out when you have a chance to do so. But you need the tools to be able to do that. Chimney brushes and rods are one of the main tools that can help you to do so. Here's a quick look at how you can find the right chimney brushes and rods for your needs.

Measure the inside of your chimney to see how large or small it is.One of the most important things that you need to do is measure how large the inside of your chimney is. Why? Because if you get a brush that is too large for the inside of your chimney, then you're going to be in a situation where you aren't going to be able to fit the brush in, or you could cause damage to the inside of your chimney as a result. On the other hand, if it's too small, then it's not going to be able to clean it out effectively, which could bring its own set of problems with it. Take the time to figure out how strong of a brush that you're going to need to have.There are all sorts of chimney brushes out there, and they are made from different types of materials. That means that you have to watch what type of material you're using. If you have a metal chimney liner, you don't want to have rough brush material because it could end up scratching it up really badly. So, look for a brush that is going to meet your needs, but at the same time isn't going to cause you a lot of trouble when it comes to cleaning up.

You also want to make sure that the brush that you have is long enough. This is what the chimney rods are for. They allow you to do whatever it is that you need to do, while at the same time making sure that you can actually reach every spot. Many of these rods are able to be extended, so all that you have to do is make them longer so that you're going to be able to reach all of those high places. Be sure to check the maximum length before you go ahead and buy one and then you'll be better able to make sure that you've got enough length to work on your chimney. So, finding the right Chimney Brushes and Rods can be a big deal, and it can make cleaning everything that much easier for you and your chimney sweeps. We have a lot of options for you to consider and we can help you to get your chimney cleaner than ever, just give us a call today and we'll help you out. To Know More About Chimney Cleanout Door Visit us...

Source : Click Here

[ethanallen-blog]

What You Need to Know About Fireplace Dampers

A fireplace damper is a valve at the opening of a chimney or fireplace that closes and opens the chimney when it is not being used. Learning about fireplace dampers is important, because if you have any issues with your fireplace such as smoke filing up in the home, you may be able to correct the problem just by learning about how fireplace dampers work. *Why Learning About Fire Dampers is Important -Fireplaces heat up homes, can add warmth and comfort to any home, and are an attractive amenity to any house. But if you don’t know what you’re doing with your fireplace, it can become a safety hazard. Too many home fires are started every year just because homeowners are too careless about their fireplaces. -The most critical part about the fireplace that homeowners should know about is the fireplace damper. The fireplace damper is located in the pipe that runs up and down the inside of the chimney. The damper will either be located at the bottom or the top of the chimney and is made out of metal or another material that can withstand high temperatures. The damper itself will resemble a flap with a hatch to open and close it.

-The Fireplace Dampers controls air flow in and out of the chimney – essentially controlling the heat of the fire. While the fire is lit, the damper should always be open so that smoke can escape out of the home and through the chimney. The more the damper is opened, the more oxygen will reach the fire and will increase the temperature. So while the fireplace damper should always be left open, how much it should be open is a factor. -Fireplace dampers also work to keep warm air inside of your home during winter months. Since hot air naturally rises, when the damper is left open the heated air will essentially leave your home…and you’ll have to spend extra in heating costs just to keep your home warm when you could have kept it warm using the fireplace. In addition, the fireplace damper can also work to keep outside things from entering your home, such as birds or debris.

Most fireplace dampers are located at the bottom of the chimney but right above the fireplace. Before starting a fire, the interior of the chimney will almost always be cold. Begin starting your fire with a small fire before letting it increase in size and temperature; the cold air moves slower than hot air, and can stop the hot air from moving out of the chimney and result in more smoke filling up the interior of your home. In contrast to this, if the fireplace damper is located at the top of the chimney, you can start up a hot fire immediately since the interior of the chimney will be more in line with room temperatures. To Know More About Chimney Dampers Visit us.. Source : Click Here

[ethanallen-blog]

How Chimney Dampers Work

How Chimney Dampers Work

A top chimney damper is the valve that the closes the chimney’s opening when the chimney is not presently being utilized. Chimney dampers may sound like a simple device, but they are important devices for preventing smoke from filing up your home. The chimney damper is actually one of the most energy efficient pieces of equipment in your home, and can save you a lot of money.

‘Chimney Effect’. This refers to when warm air moves up the chimney, and in the process, sucks more warm air from your home to move up the chimney. The chimney damper is important to prevent the air inside the chimney and fireplace from sucking in outside air. This will save you on heating and energy costs overall too. When the damper is left open in your home, it allows an avenue of escape for the warm air in your house.  

Chimney dampers play a larger role than simply keeping the warm air in your house outside of the chimney. They are also effective at containing the fire in the fireplace and preventing the fire from burning out of control. This is because chimney dampers prevent high amounts of oxygen from making their way to the fireplace. If you ever find that smoke has filled your home, it could be because the fire has gone out of control due to the chimney dampers either being broken or left open.  

The chimney damper will be located at the bottom of the chimney. It will have a handle that you can use to open the damper. Typically, this handle (or knob) is located right above the opening of the fireplace. Some chimneys may also have a damper located at the top of the chimney. To operate one of these, there will be a handle inside of the fireplace allowing you to open and close the damper. The handle is connected to a cable that runs up to the top of the chimney.  

• Parts of the Chimney Dampers

- The first part of the chimney damper that we’ll discuss is the handle that hangs down from the fireplace. This is the most commonly used part of the chimney dampers, and also the simplest component.  This lever takes is a quick push or pull towards the back or towards the front of the fireplace to operate.  

- The next part we’ll discuss is the rotary mechanism. This piece is a little more difficult than the main handle, and may require two hands. For the best grip placement on the rotary, place one hand outside the fireplace but right above the opening, and the other hand inside the saddle at the damper frame.  

• Chimney Damper Tricks

- Never light your fireplace until your damper is open. Always keep yourself up to date on the condition of your damper; if it ever leaks, you should probably replace it with a top chimney damper that is airtight. 

Source : Click Here