Cleaning a Mini Machine
Introduction:
Even the best mini mill needs some maintenance to be performed. You cannot keep any type of types of machinery that are used for the heavy works neither unclean nor untended. And when it is about the mini-mills, then you have to be extra careful.
First of all, you need to know the parts or the components and features a mini mill has. Mini-mills of different brands have one or two unique features but the other components parts are all the same. So if you know about the mini mill’s each and every features then it will be easier for you to at least maintain those machines thoroughly.
Components of a Mini Mill:
1. Motor 2. Under Cap 3. Speed Shifter 4. Motor Controls 5. Spindles 6. Drilling Chuck 7. Worktable 8. Saddle 9. Axis Lever 10. Wheels 11. Column 12. Base
So basically these are the components that you will always find in a typical mini-mill. Time for the main point. And that is the safety measures that you must take in order to prevent any damage to any assets or more importantly to yourself.
Safety Measures:
In a mini mill manual guide, you will always find the limitation of the working and loading capacity that a mini-mill can take on average. So never overload the machine with extra materials. Always check if the components of the milling machine are properly secured or not. The adjustments should not be too tight or too loose. There should be an exact measurement. If you are using the machine for the first time always wear some safety gear so that you do not harm yourself.
Cleaning the mini mill:
Never use water on any part of the machine. No water is allowed on the machine. You can use water and cleaning soap liquid if you are desperate to turn your machine into something useless and hazardous at the same time. Clean the greases and stains with either paper towel or clothing rag. You can also use the paint thinner to clean the surface but at first check the manual if the machine supports paint thinner or not. You can also use the lubrication process as the method is acceptable and useful for any type of machines. You can either use the motor oil or lithium grease.
Conclusion:
Maintaining the mini-mills or any type of milling machine takes lots of efforts and patience but those are worth it as they result in a machine in a fine working condition.