Untitled

[kcindia]

LM-79 Testing Laboratory | LM 79 Testing Labs – KC India

LED-based solid-state lighting (SSL) products offer many advantages over incandescent lamps, but they present unique challenges for performance measurements. LM-79 was developed by the Illuminating Engineering Society (IES) to standardize the photometric and electrical measurements of LED-based SSL products and is the benchmark test for lighting manufacturers and numerous qualification programs.

KC India testing laboratory is ISO accredited by A2LA for LM-79 luminous flux (lumen) and color measurements.

KC India is also a Design Lights Consortium (DLC) approved LM-79 testing laboratory for lamps and luminaires.

Quick Lumen and Color Testing for Small and Large Luminaires

2-meter integrating sphere system equipped with high-precision spectro radiometer and integrated power management

Up to 52" wide LED luminaires in 4pi configuration with omni-directional standard lamp

Up to 24" wide LED luminaires in 2pi configuration with special forward flux standard lamp

TM-30 color calculations are also available as part of our LM-79 test reports

Photosynthetically Active Radiation (PAR) measurements for LED horticultural and grow lighting

Do you need a realiable testing partner for LM-79 testing and luminaire qualification? Contact us today to experience the KC India expert engineers, responsive scheduling, and trusted results.

Complete Luminaire Testing in One Location

KC India powerful combination of EMI/EMC, Environmental Stress, Photometric, and Wireless testing services help lighting manufacturers successfully validate every aspect of their products in one location.

FCC Part 15 RF Emissions Testing and TCB Certification for LEDs and Controls

CE Mark Compliance to EMC, Low Voltage, and Radio Equipment Directives

ANSI C136.31 Vibration Testing for Roadway Luminaires

IEC 60529 Ingress Protection (IP) Testing for Water and Dust

MIL-STD-810 Temperature and Humidity Exposure

ISTA Certified Test Laboratory for Product Packaging Validation

Electric Power/Utility-Grade Surge and Transient Protection Testing

Full-service Machine Shop to Design and Fabricate Custom Fixtures and Automation Solutions

LM 79 Testing labs | Vibration Testing Labs | IP Testing Labs | EMC Testing Lab

[kcindia]

Building Material testing labs in Delhi NCR

The construction industry is a vital part of any country's economy. Because India is a developing country, the construction industry is vital to its economy. In the construction industry, quality control is critical. Only with proper quality control over the materials used in construction can economical and long-lasting structures be built. Quality control can be achieved through regular testing of building materials such as cement, aggregate, steel, concrete, tiles, fly ash, bricks, stones, and soil. The NABL accreditation validates KC India's ability to provide reliable and accurate test results. Cement, Steel, Aggregates, Tile, Bricks, Concrete, Bitumen, Admixture, and all building stones are all thoroughly tested by KC India. KC India Building Materials Testing Lab Services in accordance with the following standards:

Cement

OPC(Ordinary Portland Cement) -IS : 269 -2015

PPC(Portland Pozolona Cement) - IS 1489 -2015

WPC(White Portland Cement) IS 8042

SRC(Sulphate Resistant Cement) IS 12330

PSC(Portland Slag Cement) IS 455

Tiles :

Ceramic tiles - IS: 15622

Acid Resistance tiles I 4457

Terrazo tiles - IS: 1237

Vitrified tiles - IS : 15622

Chequered tiles IS 13801

Chequered tiles

Building Stones:

Granite

Marble

Sandstone

Limestone

Boulders

Building Bricks:

Common Burnt clay bricks

Fly ash bricks

Acid Resistant bricks

Refractory bricks

Aggregates:

Coarse aggregates

Fine aggregates

Steel :

TMT

Structural Steel

Wire

GI Sheet,etc

Paint :

Texture paint

Enamel paint

Road marking paint

Cement paint

Distemper

Concrete :

Hardened Concrete

Concrete Block

Concrete Slab

Paver block

Wood and wooden products :

Block Board

Ply wood

Flush door

Laminate

Particle/Laminated Board Wood

Bitumen and Bitumen Product :

Industrial Bitumen

Paving Bitumen

Cutback bitumen

Emulsion

Petroleum Product:

Diesel

Lubricating oil

Furnace Oil

Engine oil

Hydraulic Oil

Admixture/Water proofing compound

Fly Ash/Microsilica

[kcindia]

Building Material Testing Lab in India

KC India Test Lab - Building Material Testing Laboratory ( ISO , NABL accredited Certificate No.  ) is one of the best laboratory providing reliable, accurate and defensible data in standardize and user-friendly format.

We have expertise in mechanical and chemical testing. We also provide geotechnical, civil engineering and construction inspection services.

Our goal is to achieve unique and unbeatable position in the field of testing and analysis of materials through our constant efforts, commitment of quality and customer satisfaction.

Let me tell you one thing, you have very bright idea of starting a material testing lab. Following are the few things you need to know before starting it:

It is must to have technical person with adequate qualification which means for soil testing you have to appoint a Geotech engineer, for structural testing you will be needing a structural engineer and for highways tastings such as. BBD you will need a highway engineer.

Material testing equipments are high in price so manage proper budget.

Get company ISO certified this will help you to attract more clients.

Make contacts with local bodies’ government and private companies

Have enough space and power supply there on

Don’t forget to buy NDT instruments they are more demanding Hope this will help you for Building Material Testing Labs

[kcindia]

The Best Building Material Testing Labs Service in Ghaziabad

We are consistently engaged in providing Building Material Testing Lab from our prime location in Ghaziabad, Uttar Pradesh, India. Our diligent architects carry out this service using the best in class testing equipment for precise quality analysis of concrete, cement, dust, and other materials used in building construction. To improve work quality, we test various factors such as chemical composition, strength, stability, and sturdiness. Our Building Material Testing Labs is well-known in the construction industry for its dependability and competitive pricing.

KC India Building Materials Testing Laboratories is a market leader in geotechnical testing of construction and civil engineering materials.

We are best placed to support your testing and analysis requirements due to our expert technical teams and broad geographical footprint, with over 50+ employees based in Delhi NCR,

All of our cutting-edge testing laboratories are ISO Accredited, ensuring that the highest quality standards are met and that you can rely on our services.

KC India uses a variety of techniques to provide construction material tests and reports for your project, ensuring that all regulations are followed.

Accurate analysis and test results

Rapid response nationwide

Compliance with relevant regulations and quality standards

UKAS & INAB accredited laboratories

Highly experienced technical testing tea

Our Building materials testing solutions include

Concrete Testing: - KC India conducts extensive testing to determine the quality of fresh and hardened concrete. We provide concrete testing at all stages of your project. From on-site slump testing as you pour your concrete mix to hardened sample testing for indicative characteristics in NABL accredited laboratories, we have you covered.

Soil Testing: - Our Building material testing labs are prepared to handle large soil testing projects. To ensure that your construction process runs smoothly, our tests examine soil strength, density, compaction, and contamination data.

Aggregate Testing: - Our extensive range of aggregate testing methods complies with British and European Standards, as well as Standard Highways MCHW requirements. A variety of natural and recycled aggregates are subjected to mechanical and physical testing to ensure their suitability.

Chemical Testing: - Chemical analysis aids in the determination of material composition, impurity identification, moisture analysis, and element analysis. Our analytical expertise provides you with the data you need to support material selection or future analysis.

Building Material Testing Labs | Construction Materials Testing Laboratories

[kcindia]

The Best Building Materials Testing Laboratories

Our Building Materials Testing provides unparalleled construction and civil material testing in accordance with International Quality Standards. Our comprehensive range of services includes destructive and non-destructive concrete, steel, and wood testing, structural masonry, and water, wire, and glass evaluation. We provide a one-stop solution to reduce project delays and provide quality assurance while increasing your confidence in the home you want to build.

The raw material to-be-used for your house’s construction will undergo various parameters including durability, intensity, integrity, engineering hiccups, and quality to address future challenges & risks. We as a third-party quality auditor are there by your side to make sure you don’t see any unpleasant hiccups in the future.

Tests We Conduct

Cement/Soil – OPC/ PPC (Physical & Chemical)

Aggregates (Coarse & Fine)

TOR / TMT Steel tubes, Welding Plate/ Wire (Physical & Chemical)

Bricks (Complete testing)

Paver Blocks/ Kerb Stone

Chequered Tile / Flooring Tile/ Wall Tiles

Wood / Wood particles board

Concrete Cubes (Compressive Strength)

Soils & Bentonites

Fly Ash Analysis

Ferrous & Non-Ferrous Metals

Bitumen/ Bitumen Emulsions

Admixtures

Design Mix

Ratio of contents in Cement Mortar

Ratio of contents in Concrete

PVC Pipes

Stone Metal WBM/ GSB

On-Site Tests

Soil Bearing Capacity (SPT)

RCC Core Cutting

Core Cutting (Soil)

Rebound Hammer

BC/ DBM Core in road work

Sand Replacement Method

Building Materials Testing Labs | Building Materials Testing in Delhi

[kcindia]

Vibration Testing labs

Vibration Testing Laboratories is calibrating to compensate for the impact of ambient vibrations on testing processes. You must know about it, all buildings also have undesirable vibration, of an offence by nearby equipment. We are Minimizing the transfer of vibrations between testing equipment and the facility floor is essential this is getting complete by the use of air bearing pads, high-mass bases and other components.

Vibration Testing Laboratories Benefits

Vibration testing labs copy the conditions that a product might go throw during its lifetime while under a test environment. We can use Vibration testing to ensure that products are robust and perform safely during operation or transit, avoiding unexpected performance or early life failure in field.

In Vibration Testing Laboratories Most of the Element has extensive experience in vibration testing services and our vibration laboratories feature electro-dynamic and servo-hydraulic systems that can replicate low and high frequency conditions. Vibration testing can be completed while the product is in operation, including electrically and hydraulically, and can be performed in combination with temperature extremes.

Meeting challenging requirements: Element’s Delhi Vibration Testing Labs across the India help companies meet the latest defense, aerospace, transportation and commercial requirements, including:

1. Random

2. Sinusoidal

3. Resonance Search & Dwell

4. Narrow Band Random on Random

5. Sign-on Random

6. Combined Temperature and Vibration

7. Helicopter Rotor Frequency Simulation

8. Gunfire Simulation

9. SRS

10. Blade-off vibration (engine fan blade loss and wind milling)

Vibration Testing Lab | Vibration Testing Labs | Vibration Testing Laboratory

[kcindia]

Vibration testing laboratory in India

Vibration testing is accomplished by introducing a forcing function into a structure, usually with some type of shaker. Alternately, a DUT (device under test) is attached to the "table" of a shaker. Vibration testing Labs is performed to examine the response of a device under test (DUT) to a defined vibration environment. The measured response may be ability to function in the vibration environment, fatigue life, resonant frequencies or squeak and rattle sound output (NVH).

Squeak and rattle testing is performed with a special type of quiet shaker that produces very low sound levels while under operation. For relatively low frequency forcing (typically less than 100 Hz), servo hydraulic (electro hydraulic) shakers are used. For higher frequencies (typically 5 Hz to 2000 Hz), electrodynamics shakers are used.

Vibration Testing Lab and Its Process

Vibration testing is the process of evaluating the performance or degradation of a product, component, system, or structure when subjected to mechanical motion. It is an essential part of quality assurance, performance evaluation, regulatory compliance, quality control, fatigue testing, etc., for numerous products, from circuit boards, electronic components, and automotive parts to rocket boosters. The test sample is subjected to controlled sinusoidal, transient, or random vibrations using electromagnetic, electrohydraulic, electrodynamic, or mechanical shakers. Random vibration testing is widely used to simulate real-world conditions for a range of products, including motorcycle components, jet engines, cruise missiles, catalytic converters, etc.

It is essential to precisely control the amplitude and frequency of vibrations in the testing procedure to replicate operational conditions to predict product failure. To this end, specialty equipment and shakers that can handle a few ounces to thousands of pounds are available to suit the specific product that needs to be tested.

We, at KC India testing labs, are equipped with a wide range of Vibration Testing Services to cater testing needs of our clients in the India. We are committed to providing value for your money and satisfactory services.

Get introduced to the best place which is KC India for Vibration Testing Labs where you can have the best result for Vibration Testing. Call on 9599880268 for Vibration Testing laboratories.

Vibration Testing Lab | Vibration Testing Labs | Vibration Testing Laboratory

[kcindia]

What are Vibration Testing and its types?

Vibration testing is accomplished by introducing a forcing function into a structure, usually with some type of shaker. Alternately, a DUT (device under test) is attached to the "table" of a shaker. Vibration testing is performed to examine the response of a device under test (DUT) to a defined vibration environment. The measured response may be ability to function in the vibration environment, fatigue life, resonant frequencies or squeak and rattle sound output. Squeak and rattle testing is performed with a special type of quiet shaker that produces very low sound levels while under operation.

[kcindia]

What is vibratory testing? Vibration testing is the application of mechanical motion to a component, product, system or structure in order to observe its response or degradation over time.

[kcindia]

How is vibration testing done? The simplest vibration testing procedure, sine vibration testing uses a single sinusoidal tone following simple harmonic motion input to the test specimen. This sinusoidal tone can be swept across the test frequency range, or it can be fixed on a single frequency, depending on the requirement.

[kcindia]

Vibration Testing Lab In Delhi Looking for vibration Testing laboratory for your products? Contact Kc India Test Lab and book your test with us

[kcindia]

Vibration testing Lab in India

If you are looking for a Top Vibration Testing Lab for your product in Delhi, India then KC India Test Lab is a name of trust for all your queries

[kcindia]

What is vibration testing?

In vibration testing, the vibration environment to which products will be exposed to in real use is reproduced. Products are tested in this environment to judge their durability or check for improvements.

[kcindia]

[kcindia]

[kcindia]

IP Testing Lab In Delhi

Ingress Protection testing  (IP) Testing Labs

Ingress Protection testing, or IP testing, determines a product's susceptibility to solid particle ingress (sand or dust) as well as water ingress. The value of trusting Element with your Ingress Protection (IP) testing is clear.

What Is IP Testing?

Ingress Protection testing, or IP testing, tests a product's ability to protect against “ingress,” that is, the infiltration of water, dust and foreign objects. Some of the standards related to IP testing are MIL-STD-810 (Military), RTCA/DO-160 (Radio Technical Commission for Aeronautics), and IEC 60529 (International Electro technical Commission).

What Are Issues With Ingress Protection Testing?

There are several issues that arise with IP Testing Lab. One is that ingress protection testing requires a rigorous facility and thorough performance. Another issue is that the manufacturer must have a good understanding of the level of ingress protection that's required for their product.

Standard Applicable

 IEC 60529/ EN 60529 - Degrees of protection provided by enclosures (IP Code)

Test Supported:

Solid (First Numeral)

Water (Second Numeral)

IP 0X - Non Protected

IP X0 - Non Protected

IP 1X – Objects Probe ≥ 50mm Diameter

IP X1 - Vertically Dripping Water

IP 2X - Objects Probe ≥ 12mm Diameter

IP X2 - Dripping Water (15° Tilted)

IP 3X - Objects Probe ≥ 2.5mm Diameter

IP X3 - Spraying

IP 4X - Objects Probe ≥ 1.0mm Diameter

IP X4 - Splashing

IP 5X - Dust Protected

IP X5 - Jetting

IP 6X - Dust Tight

IP  X6  -  Powerful Jetting

-

IP X7 – Temporary Immersion

-

IP X8  -  Continuous Immersion

-

IP X8  -  Continuous Immersion

Ingress Protection Testing Methods:-

Element's IP testing capabilities will allow you to ensure reliability of your products and enclosures and determine protection from water and particle ingress

IP Testing (IEC 60529): IEC 60529 is an international standard designed to give products a determined International Protection Marking according to the IP Code rating. This standard tests the sealing effectiveness of enclosures of electrical equipment against the intrusion of solid particles and liquid.

Electrical Enclosure Rating Testing (NEMA 250 & UL 50E): Specific to North America, NEMA 250 (National Electrical Manufacturers Association) ratings cover additional product features and tests such as functionality under construction requirements, electrical enclosures for hazardous areas and industrial applications against environmental hazards such as water, dust, oil or corrosive atmospheres.

High Pressure Steam Jet Cleaning (DIN 40050-9): Covers degrees of protection of electrical equipment of road vehicles against foreign objects, water and access.

Water Resistance of Shipping Containers by Spray Method (ASTM D951): ASTM D951 is used to determine the water resistance of shipping containers and determines their ability to resist deterioration caused by water and the container’s ability to protect contents from water. Frequently used in conjunction with other tests such as drop test, inclined impact test, vibration or compression tests. 

Get introduced to the best place which is KC India for IP Testing Labs where you can have the best result for Ingress Protection Testing. Call on 9599880268 for IP Testing laboratories.

IP Testing Labs | IP Testing Lab | IP Testing Laboratory

[kcindia]