LED TEST

[lisungr]

What can an environmental test chamber do? - Densipaper

Introduction Environmental chambers can be used to test products in the following industries: automo

[lisungr]

Environmental Test Chamber Manufacturer and Supplier in China - Dripiv Plus

A device that allows users to alter the environmental conditions of an enclosed area in order to con

[lisungr]

LISUN History - Goniophotometer, Integrating Sphere, Surge Generator

LISUN INSTRUMENTS LIMITED was found by LISUN GROUP in 2003. We have sales and service offices in China, Russia, India and Korea. In 2012, we built a high level products show room and accreditation lab in Shanghai. LISUN has setup a new manufactory in China to design & produce the lighting and electrical test instruments. Its quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab. - lisungroup.com

[lisungr]

LISUN solution for RoHS testing methods

Introduction to RoHS testing： The European Union officially announced the 2002/95/EC Directive on 27th January, 2003, the "Directive on the Prohibition of Certain Hazardous Substances in Electrical and Electronic Equipment" (referred to as the RoHS Directive), which took effect on 1st July, 2006 . The directive requires that eight categories of electronic and electrical products sold in the EU market must undergo RoHS testing and must not contain six hazardous substances such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers. ROSH Environmental Certification-Management Measures for the Control of Pollution by Electronic Information Products-The "Administrative Measures" implemented on 1st March, 2007 require companies to affix their labels in accordance with the requirements of SJ/T 11364-2006. Core content of "Administrative Measures": Producers should gradually reduce and eliminate the content of lead, mercury, cadmium, hexavalent chromium, polymeric brominated biphenyl (PBB), polymeric brominated biphenyl (PBDE) and other toxic and hazardous substances in products; for those that cannot be completely eliminated, The content of toxic and hazardous substances shall not exceed the relevant provisions of the standard. The detection methods of 6 hazardous substances in RoHS:

“Testing Methods for Toxic and Harmful Substances in Electronic Information Products" (hereinafter referred to as "Testing Methods", the standard number is SJ/T 11365-2006) limits the testing methods for harmful elements in the RoHS requirements. Among them, X-ray fluorescence spectroscopy (XRF) has been established as a quick screening method as the fastest and most convenient method. X-ray fluorescence spectroscopy (XRF) can be used to accurately test the corresponding standard samples of the five elements of lead (Pb), mercury (Hg), cadmium (Cd), chromium (Cr), and bromine (Br).

The EDX-2 RoHS test Instrument mentioned in the above detection method is a RoHS edxrf spectrometer developed by Lisun engineers according to market demand, which fully meets the requirements of the latest EU RoHS directive and is exported to foreign markets. The following is the product picture:

EDX-2_Rohs test equipment

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

Common Test Methods for RoHS Test Equipment

RoHS is a mandatory standard established by EU legislation. Its full name is "Restriction of Hazardous Substances" (Restriction of Hazardous Substances). This standard has been formally implemented since July 1, 2006 which is mainly used to regulate the materials and process standards of electrical and electronic products. And making it more conducive to human health and environmental protection. The ROHS directive is divided into RoHS1.0 and RoHS2.0, and the substances required to be tested are different, and the test methods are also different. There are many RoHS test methods: Chemical detection, X-ray fluorescence spectrometry (XRF), Gas chromatography/mass spectrometry (GC-MS), etc. Among them, X-ray fluorescence spectroscopy (XRF) has been established as a quick screening method as the fastest and most convenient method. X-ray fluorescence spectroscopy (XRF) can be used to accurately test the corresponding standard samples of the five elements of lead (Pb), mercury (Hg), cadmium (Cd), chromium (Cr), and bromine (Br). If the sample composition is uneven, it is invalid. (These five substances are controlled by the ROHS1.0 directive)

LISUN EDX-2 RoHS detective testing equipment (Analyzer for rohs compliance testing) use the XRF method, it with below advantages and features: • High-resolution, high-definition camera for easy operation. • All imported core technology and original parts from Europe and America. • Camera and cabin lighting system, real-time view the test position of the sample. • Reliable power supply over-current and short-circuit protection to ensure equipment safety. • Automatic control test system, convenient for customers to use.

EDX-2_Rohs test equipment

The current IEC standard is PY/TD-GC-MS (thermal cracking/ Thermal desorption-gas chromatography-mass spectrometry detector), where the thermal cracking temperature is high, up to 1200 degrees, many large molecular substances are cracked into small molecular substances, which will Interference and false positives to the results, so need to use MS mass spectrometers to qualify.

LISUN EDX-4 RoHS 2.0 test equipment (RoHS testing machine) use EDX-4 micro-cracking desorption technology (thermal cracking/thermal desorption-gas chromatography), we only need to quantify the corresponding o-benzenes, so our heating range is set in the range of 200°C-450°C, so that all four o-benzenes are volatilized and enter GC (gas chromatograph) for quantification without affecting the results of other macromolecular substances. It fully meets the requirements of IEC62321-8 and is more reasonable and scientific to set a more accurate temperature range.

EDX-4 ROHS 2.0 Test Equipment

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

India-LISUN engineer provide free after-sales-services for the customer

This customer entered the LED industry in India relatively early. They started as a retailer of lighting products. With a strong economic foundation and customer’s satisfaction, the company has developed rapidly over the years and has become one of the country's largest manufacturers of LED lights. A few years ago, this customer inquired about our company's SG61000-5H15-SP surge generator through the website. When they got news that LISUN will participate in exhibition, They apply to discuss with our engineer on exhibition for some technical question; After the exhibition, the customer quickly placed an order and paid to our company. We arrange production as soon as we receive the customer's order, After the customer receives our equipment, they operate it successfully in accordance with our instruction manual and operation video. This time the customer contacted us mainly for after-sales issues. The customer encountered a problem for the first time after receiving our equipment for several years, The following is a picture of customer feedback. After checking the pictures and videos sent by customers online for free, our engineers found that the high-voltage board was burned out, there is no surge output. Due to the customer’s out-of-warranty equipment, we only charged the cost of the high-voltage board and did not charge any fees for checking equipment problems. A colleague of LISUN after-sales department immediately delivery a high-voltage board through the customer’s express account. After the customer received the high-voltage board and replacement it by themselves, the equipment has been working normally. During the entire after-sales service process, LISUN engineers helped the customer solve the current problem,and they were very satisfied with our service. The following are the photos before and after replacing the high-voltage board.

Before replace the high-voltage board

After replace the high-voltage board

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp:[phone] Sales Dep: [email protected], Cell/WhatsApp:[phone]

[lisungr]

Testing Content and Application Fields of RoHS Test Equipment

RoHS is a mandatory standard established by EU legislation. Its full name is "Restriction of Hazardous Substances" (Restriction of Hazardous Substances). This standard has been formally implemented since July 1, 2006 which is mainly used to regulate the materials and process standards of electrical and electronic products. And making it more conducive to human health and environmental protection. The purpose of this standard is to eliminate six items of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers in electrical and electronic products, and stipulate that the content of lead should not exceed 0.1%. The new directive 2011/65/EU (RoHS 2.0) to replace the 2002/95/EC (RoHS) new directive will take effect on July 21, 2011.

Testing content of RoHS test equipment RoHS test equipment also called RoHS compliance testing, efficient RoHS testing machine, RoHS testing using xrf analyzers. In response to the RoHS directive, LISUN designs two RoHS test equipment: EDX-2 RoHS 1.0 test equipment and EDX-4 RoHS 2.0 test equipment:

LISUN EDX-2 RoHS 1.0 test equipment mainly used to test the content of six harmful substances of Pb, Cd, Hg, Cr6+, PBDE and PBB. The EDX-2 can analyze more than 75 chemical elements ranging from sulfur to uranium.

EDX-2_Rohs test equipment

LISUN EDX-4 RoHS 2.0 test equipment can test the content of 4 kinds of difficult-to-volatile o-benzene: DIBP, DBP, BBP, DEHP.

EDX-4 ROHS 2.0 Test Equipment

Application fields of RoHS test equipment 1. Professional testing institutions such as customs and third-party testing institutions 2. Manufacture industries of computers, telephones, mobile phones, cameras, radios, televisions, etc. 3. Manufacture industries of toys, game consoles, cultural and sports equipment, gifts, accessories, hardware, etc. 4. Manufacture industries of household appliances such as refrigerators, washing machines, microwave ovens, air conditioners, etc. 5. Manufacturing industries such as furniture, paint, painting, etc. 6. Manufacture industries of textile, leather, food, etc. 7. Manufacture industries of machine tools, processing equipment, power tools, etc.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

Introduction to RoHS Restriction of Hazardous Substances

RoHS Background: The European Union Conference and the Council of the European Union formally announced the document 2002/95/EC in February, 2003: It is required that electrical and electronic products entering the European Union from 1st July, 2006 should comply with the Restriction of Hazardous Substances Directive (Restriction of Hazardous Substances). , Referred to as RoHS). This directive mainly restricts the content of lead Pb, mercury Hg, cadmium Cd, hexavalent chromium Cr6+, polybrominated biphenyls PBB, and polybrominated diphenyl ethers PBDE in products. Many electrical and electronic products contain these six toxic and hazardous substances at present. RoHS 2.0 Revision Directive: The European Union Official Journal (OJ) issued the RoHS 2.0 Amendment Directive (EU) 2015/863, which officially included DEHP, BBP, DBP, and DIBP in the Appendix II restricted substances list. Up to now, Appendix II has ten mandatory controls. It substances effective time medical equipment and monitoring equipment until 22nd July, 2021, and other electronic and electrical products 22nd July, 2019. On January 6, 2016, the Ministry of Industry and Information Technology, the National Development and Reform Commission and other eight ministries and commissions jointly issued the "Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products". It is proposed to establish a conformity assessment system for the restriction of the use of hazardous substances in electrical and electronic products. It officially launched on 1st, July, 2016. RoHS Application areas: ROHS testing equipment applications are suit in industries such as electronics, electrical appliances, medical care, communications, toys, plastics and so on. The main test substances in RoHS 1.0 tester requirements are as follow:

LISUN has been specialized in testing equipment for many years. Based on years of experience, we have designed and developed the EDX-2 RoHS tester (EDXRF) that meets market needs. It has been exported to the Middle East, Europe, Southeast Asia and other markets, and has been favored by customers. The following is a picture of Lisun EDX-2 RoHS test equipment:

RoHS Testing Equipment (EDXRF)

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

Italy-Customer installed GLE-20 Particulate Filtration Efficiency Tester independently by watching the video

The client is an importer in Italy. Due to the development trend of the epidemic and the continuous expansion of market demand, the company's business has turned to KN95 masks and melt blown cloth required for KN95 masks. This customer learned about our company through the website in 2020. After learning about our company's products on the website, he quickly inquired about the price. We fully understood the customer's testing requirements, and quickly recommended the GLE-20 Particulate Filtration Efficiency Tester to the customer. Customer was very satisfied with our proposal. Customer happily placed the order after many exchanges with our business via email. We arranged the production immediately after receiving the customer's order. After receiving the equipment notification from the customer. Due to the epidemic, we can not provide on-site installation and training services for the customer. Therefore, we sent the installation video to the customer and instructed the customer to install the equipment through online remote guidance. Customer watched the video carefully for serval times, he started to complete the installation step by step and successfully tested and used it. After the test, customer was very satisfied with our after-sales service. The following is the picture provided by the customer’s lab:

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp:[phone] Sales Dep: [email protected], Cell/WhatsApp:[phone]

[lisungr]

Australia-Customers independently installed LSG-1700B Rotation Luminaire Goniophotometer

The client is an Australian designer and manufacturer of innovative lighting. In addition, the company has been engaged in the lighting industry for many years. The customer learned about our company through website inquiry in 2015. Later, when our company went to the local exhibition, after in-depth consultation with us, We fully understanding the customer’s needs, we quickly recommended LSG-1700B Rotation Luminaire Goniophotometer. After discussing some technical issues with our engineers, the business cards of both parties were quickly exchanged, a preliminary stage of cooperation was established. After the exhibition, the customer contacted us via email. After many exchanges in our business, They happily placed the order. We arranged production immediately after receiving the customer's order. We quickly confirmed the darkroom size with the customer, and our engineers designed the darkroom drawing for the customer according to the darkroom size provided by the customer. While we were producing the equipment, customers were decorating dark rooms. Due to the epidemic, we cannot provide on-site installation training services for customers. Therefore, we sent installation videos to customers and guided them through online videos to guide customers in equipment installation and operations. After our careful guidance, customers began to complete the installation and successfully test to use step by step. After testing , the customer was very satisfied with our after-sales service. The following is the picture of the darkroom by the customer's lab:

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.Please feel free to contact us if you need any support.

Tech Dep: [email protected], Cell/WhatsApp:[phone] Sales Dep: [email protected], Cell/WhatsApp:[phone]

[lisungr]

Introduction of RoHS tester related standards

The European Union (EU) announce <The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment> in January 2003, abbreviated as RoHS Directive. It is required that from July 1, 2006, it is prohibited to sell electronic and electrical products containing six harmful substances of Pb, Hg, Cd, CrVI, PBBs, PBDEs in the EU market.

In August 2005, the EU promulgated the 2005/618/EC Directive, clearly defining the maximum limit values of 6 major hazardous substances in homogeneous materials:

LISUN EDX-2 RoHS tester (EDXRF) fully meets the requirements of the RoHS 1.0 Directive. X-ray fluorescence spectroscopy (XRF) is used to accurately test the corresponding standard samples of the five elements of lead (Pb), mercury (Hg), cadmium (Cd), chromium (Cr), and bromine (Br). Please click EDX-2 Testing Equipment (EDXRF) to learn more equipment information.

EDX-2_Rohs test equipment

On July 1, 2011, 2011/65/EU (RoHS 2.0) was published in the Official Journal of the EU. The latest revised directive came into effect on July 21, 2011, and the EU requires member states to convert the new directive into domestic laws, and it will be implemented from January 2, 2013. The original directive 2002/95/EC shall be repealed on January 3, 2013. Main revised content of RoHS 2.0 is as below: 1. Scope adjustment and revision of some definitions of controlled products Extend the scope of controlled products to all electrical and electronic equipment except for special exemptions. Including those exempted by 2002/95/EC: category 8 medical equipment, category 9 product monitoring equipment, and category 11 all other electrical and electronic equipment not covered by categories 1~10, including cables and other components part. 2. Revision of the Restricted Substance List Although no new restricted substances have been added, four toxic and hazardous substances (DIBP, DEHP, DBP and BBP) have been selected as candidates for restricted substances. 3. Provisions for the transition period In order to allow manufacturers newly incorporated into RoHS 2.0 controlled products to have sufficient time to comply with the directive requirements, ROHS 2.0 has set a transition period for related products. 4. Revision of the exemption mechanism The existing exemption clauses were adopted and 20 new exemptions were proposed for medical and monitoring equipment, and different exemption validity periods were stipulated for product categories. 5.Introduce the CE mark to strengthen workplace supervision Incorporate the ROHS compliance of electrical and electronic equipment into the CE marking requirements. When posting the CE mark, the producer should ensure that the product complies with the ROHS directive and prepare the corresponding declaration and technical documents. LISUN EDX-4 ROHS 2.0 Testing Equipments use micro-cracking desorption technology (thermal cracking/thermal desorption-gas chromatography) to quantitatively measure the four kinds of o-benzene (DIBP, DEHP, DBP and BBP). “EDX-2 + EDX-4” fully meet ROHS 2.0 Directive. Please click EDX-4 ROHS 2.0 Test Equipment to learn more equipment information.

EDX-4 ROHS 2.0 Test Equipment

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

LS860 luminous Intensity Distribution Tester is Designed According to CIE 127-2007

The full name of CIE 127-2007 is<MEASUREMENTS OF LEDS>.This Technical Report has been prepared by CIE Technical Committee 2-45 of Division 2 “Physical Measurement of Light and Radiation” and has been approved by the Board of Administration of the Cooission Internationale de I’Eclairage for study and application. The following is the original content of CIE 127-2007. A goniophotometer is a device to measure the luminous intensity of the source(or illuninance from the source at a given distance) in many different directions from the source. Compared with the sphere method, the goniophotometer method is theoretically free from errors due to differences in intensity distribution of the light source under test. It does not require total luminous flux standards. Instead, it requires longer time for measurement of each sample. The photometer head of the goniophotometer should meet the spectral responsivity requirement given in Section 3.3. The calibration of the photometer head(and spectral mismatch correction) should follow the recommendation for Averaged LED Intensity measurement(Section 5). The instrument also requires careful shielding of ambient light and reflected light within the instrument. LISUN designed the LS860 luminous Intensity Distribution Tester according to the CIE 127_2007 6.2 Methods of flux measurement.. It is a precise instrument for measuring LED luminous intensity.

LS860_LED Luminous Intensity Distribution Tester

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

LVD-100KG Vibration Generator System is Designed According to IEC 60068-2-6

IEC 60068-2-6 <Environmental testing –Part 2-6: Tests – Test Fc: Vibration (sinusoidal)> consists basically of subjecting a specimen to sinusoidal vibration over a given frequency range or at discrete frequencies, for a given period of time. A vibration response investigation may be specified which aims at determining critical frequencies of the specimen.The following is the original content of IEC 60068-2-6. This part of IEC 60068-2-6 gives a method of test which provides a standard procedure to determine the ability of components, equipment and other articles, hereinafter referred to as specimens, to withstand specified severities of sinusoidal vibration. If an item is to be tested in an unpackaged form, that is without its packaging, it is referred to as a test specimen. However, if the item is packaged then the item itself is referred to as a product and the item and its packaging together are referred to as a test specimen. The purpose of this test is to determine any mechanical weakness and or degradation in the specified performance of specimens and to use this information, in conjunction with the relevant specification, to decide upon the acceptability of the specimens. In some cases, the test method may also be used to demonstrate the mechanical robustness of specimens and or to study their dynamic behavior. Categorization of components can also be made on the basis of a selection from within the severities quoted in the test. LISUN designed the LVD-100KG Vibration Generator System according to the IEC 60068-2-6 Part 2 standard. It can test Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm and so on.

Electrodynamic Vibration Generator System

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

WT2080 LED Power Driver Tester is Designed According to EN 62384-2006

EN 62384-2006 <DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES-PERFORMANCE REQUIRMENTS> was approved by CENELEC on 2006-09-01. The following is the content of EN 62384-2006 Summary. This international standard specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules according to EN 62384-2006. Control gear for LED modules specified in this standard are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this standard. NOTE 1 The tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 Requirements for control gear which incorporate means for varying the output power are under consideration. NOTE 3 It may be expected that control gear complying with this standard will ensure satisfactory operation between 92 % and 106 % of the rated supply voltage, taking into account the specifications of the LED module manufacturer. LISUN designed the WT2080 LED Power Driver Tester according to the EN 62384-2006 standard. It can test Input Characteristics Test (AC)、Input Characteristics Test（DC）、Output Characteristics Test(AC)、Output Characteristics Test（DC）、Output  Start Characteristics Test、Harmonic Testig.

WT2080 LED Power Driver Tester

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

Saudi Arabia-Lisun engineers install LSG-5000CCD LM-79 Type C Moving Detector Goniophotometer

The Saudi Arabian customer is a well-known local third-party testing laboratory that provides a wide range of testing services. This client also has a laboratory in Guangzhou. It mainly provides testing services for the lighting industry and electronic equipment in accordance with the requirements of the Saudi Standardization, Metrology and Quality Organization and the Gulf Certification Center for lighting and electronic industry. The customer is our VIP customer and has purchased equipments in our company many times before. This customer previously purchased 12 sets of equipment from our company, such as SY2036 Aging and Life Test Rack and LSRF-2 Lamp Start, Run-up time and Flicker Test and other equipments. Customers were still very satisfied with our products and after-sales service. Later, the customer wanted to expand their lighting test capabilities. After their engineers communicated with Lisun's engineers to confirm a series of questions about the darkroom laboratory, we recommended the LSG-5000CCD LM-79 Moving Detector Goniophotometer (Mirror Type C) according to the customer’s budget and requirements.  Finally the customer ordered two sets of LSG-5000CCD LM-79 Moving Detector Goniophotometers (Mirror Type C) in our company. One set was kept in their Guangzhou ‘s laboratory and the other was kept in their Saudi’s laboratory.

We arranged the productions soon after receiving the customer's order. While we were producing the equipments, our engineers designed the darkroom drawings according to the darkroom dimensions provided by the customer. After customers decorated the darkroom according to our darkroom drawings, their equipments were also completed. Our engineers first went to their Guangzhou laboratory for installation and training. After Guangzhou schedule finished, our engineer immediately went to their Saudi laboratory for installation and training. Because we have cooperated with this customer many times before, the installation and training operated smoothly and was completed quickly. The following were the photos taken by Lisun's engineers in the customer's Guangzhou ‘s laboratory and Saudi‘s laboratory:

Guangzhou's Laboratory

Saudi Arabia's Laboratory

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp:[phone] Sales Dep: [email protected], Cell/WhatsApp:[phone]

[lisungr]

TTC-1 Tracking Test Chamber is Designed According to IEC60112-2009

The full name of IEC60112-2009 is <Method for the determination of the proof and the comparative tracking indices of solid insulating materials>. It has been prepared by subcommittee 15E: Methods of test, of IEC technical committee 15: Insulating materials.The following is the original content of IEC60112-2009 Principle. The upper surface of the test specimen is supported in an approximately horizontal plane and subjected to an electrical stress via two electrodes. The surface between the electrodes is subjected to a succession of drops of electrolyte either until the over-current device operates, or until a persistent flame occurs, or until the test period has elapsed. The individual tests are of short duration (less than 1 h) with up to 50 or 1 00 drops of about 20 mg of electrolyte falling at 30 s intervals between platinum electrodes, 4 mm apart on the test specimen surface. An a.c. voltage between 1 00 V and 600 V is applied to the electrodes during the test. During the test, specimens may also erode or soften, thereby allowing the electrodes to penetrate them. The formation of a hole through the test specimen during a test is to be reported together with the hole depth (test specimen thickness). Retests may be made using thicker test specimens, up to a maximum of 1 0 mm. NOTE The number of drops needed to cause failure by tracking usually increases with decreasing applied voltage and, below a critical value, tracking ceases to occur. LISUN designed TTC-1 Tracking Test Chamber. Due to the electric stress and electrolytic contamination of the surface. This method simulates tracking currents on insulation material by providing drops between electrodes. During the process of normal use, insulating material may be exposed to moisture and dirt, and may cause stress and fire hazard if it is conductive.

TTC-1 Tracking Test Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]

[lisungr]

YWX/Q-010 Salt Spray Machine is Designed According to IEC 60068-2-11-3.1 Test Standard

The full name of IEC 60068-2-11-3.1 is <Basic environment testing procedures Part 2: Tests Test Ka: Salt mist>. It is edited by the IEC technical committee in 1981. The following is the original content of IEC 60068-2-11-3.1 Test chamber. The chamber for this test shall be constructed of such materials will not influence the corrosive effects of the salt mist. The detailed construction of the chamber, including the method of producing the mist, is optional provided that: a) the conditions is the chamber are within the limits specified. b) a sufficiently large volume with constant, homogeneous conditions (not affected by turbulence) is available. these conditions should not be influenced by the specimens under test. c) no direct spray impinges upon the specimens under test. d) drops of liquid accumulating on the ceiling, the walls or other parts can not drip on the specimens. e) the chamber shall be properly vented to prevent pressure build-up and allow uniform distribution of salt fog. The discharge end of the vent shall be protected from squalls which can cause strong air currents in the chamber. LISUN designed the YWX/Q-010 Salt Spray Machine according to the IEC 60068-2-11-3.1 standard. It is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products.We design different size of chamber to test different dimension products.

YWX/Q-010 Salt Spray Test Machine

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test Systems, ESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test Chamber, LED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support. Tech Dep: [email protected], Cell/WhatsApp: [phone] Sales Dep: [email protected], Cell/WhatsApp: [phone]