Laser Marking Engraving Machine System Expert and Manufacturer @mactrontech-laser-blog - Tumblr Blog

What Kind of Precision Ruler of a Fiber Laser Engraving Marking Machine Should We Choose?

bout the precision ruler of a fiber laser marking engraving machine, it is used to measure the precise focusing of the laser working on the surface of the material need to be processed. It is a very simple and unimpressive. Actually, it is really not as important as some core components like optical galvo scanner & lens and fiber laser source. But in some especially situation and circumstance, it has a remarkable role.

First, Let’s take a look at the common standard specification of the precision ruler of a fiber laser engraving marking machine.

Normally, a 20W/30W fiber laser marking engraving machine’s precision ruler’s height is 54 cm. This height is high enough for the 110 x 110 mm, 175 x 175 mm, 200 x 200 mm f-theta lens’ focusing.

Talking about a 50W fiber laser marking engraving machine, its f-theta lens usually is 200 x 200mm or 300 x 300mm, the wider area needs higher positioning for the lens and laser focusing. So the precision ruler equipped is better 70 cm.

Of course, there is also an extra high precision ruler specification 80 cm.

Then, what kind of precision ruler we should choose for our fiber laser engraving marking machine? Why there is an extra high precision ruler 80cm existing?

The Answer is very simple, some object and material need to be laser engraved marked is big and has some height itself. Then this raises the focusing height. That’s why need a higher precision ruler in this situation.

Here Below is a Vide of the Measuring and Testing the Accurate Focusing Height Distance from Lens to Object with a height.

There is another factor, that sometimes we need to use a rotary attachment(or called rotary device), the rotary attachment itself also has some height, then it also raises the focusing height for the lens, and makes us need a higher precision ruler to ensure the laser focusing in a high position.

Actually, there is another laser machine called flying online laser marking engraving machine. It is used to match with the modern auto or semi-auto production line for online/flying laser marking printing for bulk orders. This flying laser marking engraving machine’s precision ruler is usually equipped very high with 80 cm height.

So that all about today’s discussion, more FAQ about the laser machine systems, welcome to visiting Mactron’s FAQ column. Thanks for your attention.

(To Laser Engrave Mark on This Kind of Object with a high Height need to use and adjust the Precision Ruler)

(Source: https://www.mactron-tech.com/what-precision-ruler-of-a-fiber-laser-engraving-marking-machine-we-should-choose/)

#Precision Ruler of Laser Marking Engraving Machine

Flying Fiber Laser Engraving Marking Printing Machine Laser Processing o...

#Flying Fiber Laser Engraving Marking Printing Machine #Laser Processing on Luggage #Mactron Laser

As we know, the normal configuration of a fiber marker engraver is 20W power with 110 x 110 mm lens. Usually, the marking engraving within 110 x 110 mm area

#laser marking engraving 200x200mm #mactron laser

Foam and Silicone Rubber are Some Kind of Special Materials that Not So Hard and Don't Have High Density. Can we Laser Engrave or Cut on Them?

#laser engraving on silicone rubber #laser cutting on foam

Can a Laser Machine Engrave or Cut on Foam or Silicone Rubber?

Regarding the subject, we must know about the material foam and silicone rubber. The foam consists mainly of polyurethane as well as additional chemicals increasing its viscosity and density. Brief, it consists mainly of polyurethane. The Silicone Rubber, of course, consists of silicone.

So the question is, Can a laser machine engrave or cut on foam or silicone rubber?

First, Let’s talk about foam, according to our memory, the foam is very light and not hard. So to laser engrave on foam are very hard. But for cutting foam, it is OK. But we need to make some test and careful operation, Usually, for a piece of foam sheet, the thickness can not to too thick, it’s better not exceed 10 cm thickness. And the laser cutting engraving machine’s power controlled around 100W ~ 150W would be good. The laser machine we can choose a Co2 laser cutting engraving machine.

Here below is a picture of two pieces foam cut by Mactron laser cutting engraving for information:

Then talking about the Silicone rubber, to laser engrave mark or laser cut on silicone rubber is no problem. As Silicone rubber has some density and hardness, not so light and loose like foam. So it is better to control and do the laser engraving marking or laser cutting on silicone rubber.

But for silicone rubber, it is better to do laser engraving marking work. Both a Co2 laser engraving marking machine and a UV laser engraving marking machine is ok to do the work.

About laser cutting on silicone rubber, there may cause some burning at the edge and make silicone rubber look not nice. So we suggest using the traditional ways cutting the silicone rubber.

(Article Source: https://www.mactron-tech.com/can-a-laser-machine-engrave-or-cut-on-foam-or-silicone-rubber/ )

#laser engraving cutting foam #laser engraving cutting silicone rubber #mactron laser

Laser Marking Engraving on USB Flash Driver by Fiber Laser Marker Engraver - Mactron Tech Laser www.mactron-tech.com

Laser Marking Engraving on USB Flash Driver by Fiber Laser Marker Engraver

#Laser Marking Engraving on USB #Fiber Laser Marker Engraver #Mactron Tech Laser

Laser Engraving Marking on Painted Plated Aluminum Sheet by Fiber Laser System - Mactron Tech Laser

Laser Engraving Marking on Painted Plated Aluminum Sheet by Fiber Laser System

#Laser Engraving Marking on Painted Plated Aluminum #Fiber Laser System #mactron laser

Laser Engraving Marking on Wood USB Package Box by Co2 Laser Marker Engraver - Mactron Tech Laser

Laser Engraving Marking on Wood USB Package Box by Co2 Laser Marker Engraver

#Laser Engraving Marking on Wood USB Package #Co2 Laser Marker Engraver #Mactron Tech Laser

Laser Marking Bitmap Picture on Wood by Co2 Laser Marker Engraver - Mactron Tech Laser

Laser Marking Engraving Bitmap Picture on Wood by Co2 Laser Marker Engraver

#Laser Marking Engraving Bitmap Picture #Laser marking engraving on wood #Co2 Laser Marker Engraver #Mactron Tech Laser

Laser Marking Printing Date Code on Beverage Bottle by Flying Laser Marking Machine - Mactron Tech Laser

Laser Marking Printing Date Code on Beverage Bottles

#Laser Marking Printing Date Code #Laser Printing on Beverage Bottles #Mactron Tech Laser

Laser Engraving Marking on Silicone Wristband by Co2 Laser Marker Engraver - Mactron Tech Laser

Laser Engraving Marking on Silicone Wristband by Co2 Laser Marker Engraver

Laser application is a very wide in modern days, for example, laser marking engraving on metal and plastic by fiber laser machine, laser marking engraving on

Laser Marking Engraving on Glass and Crystal

#Laser Marking Engraving on Glass #Laser marking engraving on crystal #mactron