Untitled

[managedeviceeasily-blog]

www.tp-link.com to change password

Are you looking for how to change tplink router password. Then you are at the right post. Because in this article we are going to discuss about the how to change router password.

How to change router password?

1- At first you have to open any of the web browser on to your computer or laptop such as Google Chrome, Mozilla Firefox, etc. Then on the address bar of the web browser enter your router www tp link com default IP address. Then press enter.

2- Now a new login page of your router will open, where you have to enter your router default username and default password.

3- once you enter correct username and password, then you will be login into your router.

4- Then click management after that go to access control then under access control you have to go to Password on left page, and type the old password and new password.

5- Click Save/Apply to save the settings.

list of networking components

1- After first you have to login into your web management page of your router.

2- Then click on maintenance then under maintenance you have to go to Administration, then type in a new password.

3- Then you have to Click Save.

For routers of self-developed interface: TD-W8970/TD-W8980/TD-W9970/TD-W9980.

1- At first you have to login into your web management page of your router.

2- Then you have to click on system tools under system tools go to Manage control. then type in the old password, new password and username.

3- Click save.

For routers of new blue UI: Archer D7/Archer D9/Archer D5

1- Login into your router web management page.

2- Then click on advanced setup under advance setup go to system tools then go to administration then type in your old and new password.

3- Then click save.

[managedeviceeasily-blog]

JioTV FAQ for Easy Navigation

Jio 4G phones is worked wonderfully and seemed fast and reliable speed of mobile is very good to use, it is not just video chats and free calls the 4G on the iPhoneenablesit also powers services like web browsing and JioTV, watching TV and streaming music is fun on the mobile of Jio.

Because of the speed there is no buffering while a website is loading its inbuilt browser or video is streaming least there was none when used device it helps the software on JioiPhone well optimised the interface, not as easy as it on a Smartphone because the Jiophone touch screen is lack  despite it dual-core processor and 512 MB of RAM, the apps take a another to open but there jio hotspot login is no Understandable lags  except when fast  go back and forth between apps using back button, too many apps at the same time if talking of interface the main way navigate on the phone is via ok button large button in middle, back button the red one the four-way navigation button, as noted earlier  there are no touchscreen somany ways Jiophone  operates like phone of old days, the voice commands that make doing some easier on phone.

Hardware and software

Who seen the share of vapourware device that sounds fancy but doesn’t work, when a company offers something like a free smart feature phone but after using jiophone for while many people impressed, it works and seemingly for seemingly because you don’t use the phone properly.

jio hotspot login   The Jiophone fairly bland and regular design and it handles very much feature phone but the T9 keyboard is not mushy.

Jiophone2.4 inch screen is very comfortable to carry small and all feature in just a Jiophone

[managedeviceeasily-blog]

Steps to find the wireless network name

If you are using the wifi routers, then we believe that you must have the knowledge regarding the wireless router because only when you are having the knowledge regarding this you can manage the account of the wireless network name.

If you are having any doubt regarding the wireless password as well as the router admin password, then one thing we must tell you that these are different things. The major goal of the network password is to make the connection of the computers along with the other device through the use of the wireless network. On the other hand, the goal of the router admin password is to login to the router web-based setup page.

Here are the steps for the web-based setup page

Step 1: open your http myrouter local web management page.

Step 2: After opening this page, you need to go to the option for the setup and then click on the option of the wireless.

Note: The image that we have used in this blog varies from model or product to product.

Step 3: change the settings from manual if you want to check for the settings of the wireless network or http myrouter local. Note down the details of the network name or the SSID .

Step 4: Just enable the option for the SSID which is mainly used in the case of the wireless devices that are using the wireless network system.

Whether you are using WPA2/WPA mixed mode, WPA2 personal mode the details of the passphrase for all of them are mysecretkey

Here are the steps for the Linksys connect

Step 1: Open the app for the Linksys connect on the system that you are using. For starting the app just move to Start à all programs à Linksys connect

Step 2: From the main screen of this app, make the selection of the option for router settings

[managedeviceeasily-blog]

How to setup asus rt-n12 as access point

This article will provide you the details about how to Setup Asus rt-n12 as the access point.  The following are the procedural steps that need to be followed for this setup

•             First of all, you need to connect your AP router to LAN port from the WAN port of the router.

•             In the next step, you have to click on the UI page in the router.  Click Administration and then go to the Operation Mode.

•             By doing this, you will be redirected to the next page, where the following options are available to you Operational Mode, System, Firmware Upgrade, Restore/Save/Upload Setting.  You have to select the operation Mode under the Asus repeater mode that is available on the top left side of the screen.

•             In the next step, you have to go to the Operation Mode under the Administration.  The page provides you two options, the first option is the wireless router mode (default), while the other option is Access Point (AP) mode and then click on the Save button.

•             After that, you have to select the LAN IP Settings under the Internet Setup.  Here you have to set the details of your network like LAN IP, Gateway, Subnet Mask, and the DNS.

•             Then you have to go to the Wireless Settings under the Router Setup and login credentials like the Network name (SSID), password, and the Network Key for the wireless network.  It is important that the key that you have entered has the characters or letters between 8 to 63.  The default setting for the system is  WPA2-Personal AES.  You can also leave the security key field blank if you don’t want to set the network security, but this increases the risk of unauthorized access to your network.

•             At last, just click on the Apply icon to save the settings that you have made.  

[managedeviceeasily-blog]

tp link modem 500mbps

Hey guys what’s up! From my couple of days research, I have found that many of you are looking for the features of tp link modem 500mbps. And still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss each and every about tp link modem 500mbps.

Features of HTTP 192.168 o 0.1 tp link modem 500mbps.

•    This modem has all in one modem features with the help of this you can enjoy 4K movies, gameplay and many more. This modem supports the fastest DOCSIS 3.0 cable internet subscriptions.

•    This modem is best for watching 4K movies and gameplay with the fast and reliable internet connection.

•    It provides smoother wi-fi connections because of 1 GHz dual-core processor.

•    This modem can work with all service provider such as XFINITY, Spectrum and many more.

•    With the help of tether app, you will be able to manage your HTTP 192.168 o 0.1 tp link modem 500mbps.

This is the main Features of  tp link modem 500mbps

 How to login into Tp-link Router.

•    Open any of the web browsers on to your computer or laptop, then on the address bar enter your router default IP address. Then press Enter.

•    Now a new login page of your router will open where you have to enter your router default username and default password.

•    Once you enter correct login details of your router, then automatically you will be login into your router.

In this above way, you will be able to login into your TP-Link router. Follow us for more latest update relating to relating to the router.

[managedeviceeasily-blog]

setup for Belkin F9K1015 WiFi Extender

The Belkin Wi-Fi Range Extender can eliminate the dead spots and extend the range of your router network.

The product features of Belkin F9K1015 WiFi Extender.

Wi-Fi Protected Setup button allows you to connect with the other WPS-capable devices. The Wi-Fi Protected Setup button is located on the top of your device.  Near the WPS button, there is a small light which indicates the status of your connection.

•             When the light is off, then the WPS connectivity is idle.

•             When the light is blinking blue, then this means that the range extender is detecting a WPS-enabled device and solid blue means a secured connection is established.

•             The blinking orange means a connection is not established.

 On your range extender push and hold the WPS button for a few seconds, when the LED light starts to flash you can release the button.

The Belkin Wi-Fi range extender can extend the range of your router’s signal.  the setup process for Belkin F9K1015 WiFi Extender consists of some simple steps.

The web-based setup for Belkin F9K1015 WiFi Extender

•             First of all plug in the Belkin range extender to a power supply outlet.

•             Then connect the internet accessing device like your Computer or Mobile to the network available.

•             Open the browser that you are using, and type the web address http Belkin range  or Belkin.range setup and press enter.

•             After that you will be redirected to a Web page, then tap on the Get Started and then you have to select the Wi-Fi name from the available network’s list.

•             In the next step you have to enter the Wi-Fi password and after that select the Next.

•             You have to select the Wi-Fi network again, and then just tap on the Create Extended Network.

[managedeviceeasily-blog]

Netgear Extender wn2000rpt to Router Device connections

If you are looking for a help in installation and setting up NETGEAR WN2000RPTv1 WiFi Range Extender. Bring your device to the same room where your wireless router where you want to install your extender. You can move the extender to your preferred place once the setup is complete and you have a working connection. For more information about NETGEAR extender visit mywifiext login.

1.       Turn on the power button of your extender and wait to turn green the LED of extender.

2.       On your wireless device check for the name NETGEAR_EXT of wireless network. This name is default name of your extender.

Note: Make sure the wireless capability of your computer is on if you are not able to see the wireless network of your computer. Reset your extender to factory default settings if your laptop detects wireless network without problems.

3.       To start the extender Smart wizard open your web browser, if you have successfully connected to your extender. Before clicking on "continue" select language.

4.       The Smart Wizard will start making search for the existing wireless networks within the range. A list of different wireless network will be displayed of the screen once the search is done.

5.       Before moving further select the name of your existing wireless network which you want to extend.

6.       Enter the wireless key of your extender and click on "Continue".

7.       Now you have an option to change your extender's name or SSID. Give any name to your network and once you have changed it click on "continue".

8.       In the passpharse field of your wireless network type the new pass password of your extender and the click on "Continue".

9.       Now your extender is connected to your home router. Now you are able to connect your wireless devices with your new network name. Click on "I have connected to the extender to finish the setup" once you are connected to the network.

[managedeviceeasily-blog]

set up the wireless schedule on Nighthawk router extender | Home | easyfacts

Some of the users of the internet are not aware of the usage of the wireless schedule. This new technique helps in saving data when it is not in use. If you are...

When the website will complete all of its loading, then you will be asked to enter the details of the user name and the password. The default user name is admin and the default password is password. Now, click on the option of the advanced or mywifiext setup, then click on the option of the advanced setup à wireless setup and then click on the option of add a new period.

[managedeviceeasily-blog]

This product actually became very famous due to the fact that it was portable as well as number of phones could be connected to one network. Every device has issues and so does JioFi. Many people have been complaining that many people have been complaining that their JioFi device is not getting connected to their phones, for reasons that they could not find out. This is one of the most common problems apart from automatic reboot as well as forgetting the password frequently.

[managedeviceeasily-blog]

benefits of using a Linksys cloud account

If you are using the Linksys cloud account or you are thinking about to use the Linksys cloud account, then from this blog you will be aware of the benefits of using the Linksys cloud account. So, …

The Linksys smart routers are based in such a way so that they can easily receive the notifications regarding the latest software. All the updated software will give you the new and the unique experience of enjoying the high-speed as well high performing internet.

[managedeviceeasily-blog]

JioFi M2S Wireless 4G Data and Voice Device

If you are going to buy the JioFi then from this blog you will have the information regarding all the features of the device. So, just ...

If you are using this device, then you can easily enjoy or connect around 10 wifi devices and the devices may be of type of computers, laptops tablets or smart tv’s which have feature of connecting devices through wifi. If you are using this device having speed of 4G, then you can easily enjoy the downloading speed of around 150Mbps and can enjoy the uploading speed of around 50 Mbps.

[managedeviceeasily-blog]

When it comes toBelkin N600 Dual-Band Wi-Fi Range Extender for a moment and I should speak about it, it’s great and very easy to setup,...

Belkin has really provided it’s great user experience and very easy. The design is really awesome as well and suits with all kinds of decorations. You’ll also obtain up to 300 Mbps speed with also two external antennas deliver this power. It’s well-matchedwith 802.11 a/b/g/n and comprises an RJ45 joining on the bottom, if you don’t link with a wireless device, but you would like the connectivity.

[managedeviceeasily-blog]

asus rt n12hp repeater setup

Repeaters are very helpful for increasing the WiFi range. It repeats the router's signal and makes it to reach the places where signal ...

Look at the bottom of your repeater, a 'Restore' is present there. This is used to bring the device to its factory version. Long press this Restore button for 5 seconds. When Power LED present at the front side of repeater starts flashing, stop to press the Restore button. When wireless LED light is long light, that means repeater is recovered to its default version or default settings i.e. factory version.

[managedeviceeasily-blog]

Asus device Wi-Fi connections are dropping frequently

Today let us fix the frequent dropping of WI-FI connections in the Asus ac repeater.

Please check whether the following configuration are made properly in your router settings.

1. First check whether the router has the latest firmware.

2. Login to the http router.asus.com by entering your username and password. If you login for the first time then the default username is admin and the default password is admin.Then, click the ‘wireless option’ under the advanced settings. Click the ‘control channel’ option, and you can set a less interference from the available interference.This might fix the frequent WI-FI droppings.

3. Try to change the band to 2.4GHz and change the channel bandwidth to 20/40MHz. 40MHz is some time very unstable because of Bluetooth devices, microwaves, phones and its interference. When you use 5 GHz band, you don’t have the option to choose 20/40MHz, rather you can choose either 20 or 40 MHz.

4. Make sure that the router is not disturbed by any other wireless signals. Example: cordless mikes, cordless phones, microwave, Bluetooth and other signals.

5. Also make sure that there is no block around the router which could limit the WI-FI signals. Example: concrete wall in between rooms, closed room, iron door and etc.

6. If you can’t figure out the problem, then keep the router at a different place and find whether it works properly. Place on the centre of the room or on table or on desk or any place where there is weak WI-FI signals.

[managedeviceeasily-blog]

Can I Have Guest Account for Belkin Extender?

Yes, for sure you can have separate guest account for your Belkin wifi extender devices but for that you will need to make sure that you can access the configuration page for your device. When you...

If you want to have guest account for your Belkin wifi extender device then you will need to have some simple steps for that. Do not worry because in this article we are explaining the steps for managing the guest account for your devices.

[managedeviceeasily-blog]

find the MAC address for the tplink wifi router

MAC address determines the unique hardware number. MAC address is used to separate different hardware in terms of identity. Routers too have their MAC address. If you are using a tp-link router and you are concerned about the MAC address of your router, then this article is helpful for you.  Like our physical address, different hardware has MAC address for their identity.

Here we are going to discuss about finding the MAC address of the tplink WiFi router. http //tplinkwifi.net admin can help you to figure out some other features and details of your tp-link router.

Finding TP-Link router's MAC address

Using web based utility console

Step 1

Connect your laptop or computer with your tplink router. Now open a web browser and enter the IP address of your tp-link router into the address bar. The default IP address is usually 192.168.1.1.After inserting the IP, press Enter key to open the login page.

Step 2

Type the admin username and password for your tplink router. The default username and password of tplink router is ‘admin’. But if you had changes the login credentials then enter those values in the fields and click for login.

Step 3

Now navigate to the left side and click on the Status. This will show a list of status, here in the LAN section you can find your tplink router's MAC address.

Using router machine label

You can even find your tplink router’s MAC address without accessing admin page. If labels printed on your tplink router are visible then you can find it there also. Turn your router and see at the back side, there you can see the printed MAC address with label prefix as MAC.

But if your router is old and labels are not clearly visible then you need to access your router’s admin page to see the MAC address.

[managedeviceeasily-blog]

List of Networking Components

Computer network is a group of two or more computers that connect with each other for sharing their resources. It is totally dependent on the sharing of devices and networks. You can share many dev…

Router is a device which connects internet connection with LAN. It is also useful when you want to share your internet connection to multiple users. There are two kinds of routers available in the market like Wireless and Wired. However, the use of router entirely depends on its private or commercial use. Myrouterlocal is a local address which is used for making login and configuring routers.