Untitled @mtsindia - Tumblr Blog

Microstructure Analysis, Microstructure Testing and Analysis Laboratory, Metallography Microstructure and Analysis, Scanning Electron Microscopy Testing Lab.

By definition, metallography is that the science handling the identification of the constitution and structure of metals and alloys by use of low-magnification, optical microscopy and scanning microscopy . Here at Laboratory Testing, the routine optical microscopy testing is performed to guage the extent of decarburization and carburization, grain size, intergranular attack and/or corrosion, the depth of alpha case in titanium alloys, the percent spheroidization, inclusion ratings, the quantity fraction of varied phases or second phase particles in metals, the evaluation of welds, also because the evaluation and identification of typical microstructures of metals to verify structure – property relationships like tempered martensite in steels.

ADDRESS:

#37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

MTS specializes in rapid response to technical and business needs in the Heat Treating Industry. We do our job when and where you need us in the most cost and time effective manner.

MTS focuses on rapid response to technical and business needs within the Heat Treating Industry. We do our job when and where you would like us within the most cost and time effective manner. Your deadlines and wishes are our priority. What sets us apart is our unique ability to know the way to provide information that's useful at every level within a corporation , in clear and concise terms. Our customers tell us that by using our services they need increased productivity, lowered energy and operating costs, improved worker output and satisfaction and increased company profitability.

ADDRESS:

#37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Positive Material Identification (PMI) is the analysis of a metallic alloy to establish composition by reading the quantities by percentage of its constituent elements.

Positive Material Identification (PMI) is that the analysis of a metallic alloy to determine composition by reading the quantities by percentage of its constituent elements. A handheld XRF PMI gun can analyze, identify and display grade and composition of a cloth in but 5 seconds without creating any marks on the fabric or destroying the sample in any way. NITON XL2 800 Series XRF analyzer offer high performance and advanced electronics while maintaining the point-and-shoot simplicity. Sealed against moisture and mud , the analyzer is ruggedly built to face up to the harshest environments – within the field or on the workplace . NITON XL2 800 Series XRF analyzer offer high performance and advanced electronics while maintaining the point-and-shoot simplicity. Sealed against moisture and mud , the analyzer is ruggedly built to face up to the harshest environments – within the field or on the workplace . MTS is proud to be the primary user in PMI testing PAN India. this may offer you the reassurance for the standard and accuracy of interpretation that MTS will provide.

Mechanical testing services measure the strength, hardness and ductility of materials under various temperature, tension, compression or load conditions.

Mechanical testing services measure the strength, hardness and ductility of materials under various temperature, tension, compression or load conditions. Mechanical testing provides information about the suitability of a cloth for its intended application to assist companies design products which will perform needless to say .

MTS organizes full-range of mechanical testing services including tensile testing, impact testing, hardness testing, fracture toughness testing and stress rupture testing to supply customers with important information about the mechanical properties and characteristics of their materials. These tests are presently getting it done through ISO 17025 accredited material testing laboratories under our witness.

ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

MTS will evaluate the suppliers based on the client’s expectation and quality standards and also make sure the product meets its regulations and performance criterions.

It is an Industry’s responsibility to make sure the standard and standard of the products from their suppliers. it's important to suits quality, standard, safety social and environmental parameter.

MTS will evaluate the suppliers supported the client’s expectation and quality standards and also confirm the merchandise meets its regulations and performance criterions. MTS will interact with customer to supply the expectation norms from their supplier and MTS will perform an independent audit.

ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Failure Analysis,Failure Analysis Testing Laboratory, Failure Analysis Testing Service, Failure Analysis Lab in Chennai, Failure Analysis Lab in India, Failure Analysis Lab in Bangalore.

Though it'd seem frustrating to affect and resolve the failure to urge a defect-free product, those times are compensated by the satisfaction of launching a defect-free product.

Understanding the way to detect the failure and where to seem for them by various failure analysis methods will provide a structure to your workflow analysis and reduce the error too and make sure that the merchandise is launched on schedule time.

In this section, we'll provide an summary of the method that's involved in metallurgical failure analysis. it'll provide you with insight into metal properties that require to be examined and therefore the test and process used for analysis.

ADDRESS:

#37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Corrosion testing, Corrosion Testing Labs in India, Corrosion Testing Laboratories in Chennai, Failure Analysis, Failure Analysis Testing Laboratory, Failure Analysis Testing Service.

Suppose a wrong coating is chosen on the manufacturing components and parts. therein case, it can convince be disastrous and may additionally cause continuous repair work and replacement, resulting in the downtime of the equipment and causing production loss.

As such, it's essential to conduct sufficient tests before selecting the coating because it will allow you to work out how effective the coating are going to be during a specific environmental situation. Without testing, one cannot determine how corrosive elements within the surrounding will impact the potential of the equipment. Various sorts of corrosion can affect the pieces of kit and cause a decrease in their efficiency; hence, determining the sort of corrosion testing is important for every piece of kit .

ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Metallography Microstructure and Analysis, Microstructure Testing and Analysis Laboratory, In-situ Metallography Test, Microstructure Analysis, MTS-India.

The science that deals with the study of microstructure of a component is understood as metallography microstructure and analysis. With this analysis, one is in a position to work out whether the metal has been processed correctly. Then the expert can determine the sturdiness and reliability of the finished product and why the merchandise failed. So, by understanding the microstructures and documenting their observations, the parties involved in manufacturing the merchandise are going to be ready to determine the product’s reliability and sturdiness . With the assistance of s, the parties also will be ready to choose the standards that require to be maintained regarding the fabric wont to produce the finished products.

ADDRESS:

#37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Scanning Electron Microscopy Testing Lab, Sem Eds Analysis, Sem Analysis Lab in Chennai, Microstructure Testing and Analysis Laboratory, Metallography Microstructure and Analysis.

When sufficient light is given, a person's eye can distinguish two points that are 0.2mm apart with none additional lens. This distance is understood because the resolution of the attention or the revolving power. A lens or an assembly of the lens can amplify the space and enable the attention to ascertain the points closely. A modern microscope will provide maximum amplification of 1000X. the amount of lenses used, and therefore the wavelength of the length used for illumination are a number of the explanations for the limitation of the microscope’s resolution . An microscope was developed when the wavelength becomes the limiting think about a light-weight microscope. Since electrons have much shorter wavelengths, it enables better resolution.

ADDRESS:

#37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Microstructure Testing and Analysis Laboratory, Sem Eds Analysis, Microstructure Analysis, Metallography Microstructure and Analysis, Scanning Electron Microscopy Testing Lab.

With the assistance of a Microstructure Testing And Analysis Laboratory, an expert can examine the material’s microstructure and supply information. This again helps to work out whether the structural parameters are within certain specifications or not.

With the assistance of the result published within the analysis, the expert can verify the fabric is within the criterion and accept or reject the fabric .

The micro structural examination of a component is typically done by employing a scanning microscope or optical microscope to amplify the properties and features of the fabric under analysis. The size or the quantity of the features within the element are often quantified, and it are often compared to acceptance criteria. With the assistance of those examinations, one can often conduct the failure analysis and help identify the sort of fabric in question.

ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Failure Analysis Testing Laboratory, In-situ Metallography Test, Mts, Metallography Microstructure and Analysis, Corrosion Testing Labs in India, Microstructure Analysis.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Mechanical testing services measure the strength, hardness and ductility of materials under various temperature, tension, compression or load conditions.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Semeds Analysis, Failure Analysis, Corrosion Testing, Microstructure Analysis, Metallography Microstructure and Analysis, Failure Analysis Testing Service, In-situ Metallography Test.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Microstructure Analysis, Microstructure Testing and Analysis Laboratory, Metallography Microstructure and Analysis, Scanning Electron Microscopy Testing Lab.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Failure Analysis, Microstructure Analysis, Corrosion Testing, Failure Analysis Testing Laboratory, Microstructure Testing and Analysis Laboratory, Corrosion Testing Labs in India.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

In-situ Metallography Test, Metallography Microstructure and Analysis, Microstructure Testing and Analysis Laboratory, Scanning Electron Microscopy Testing Lab, Microstructure Analysis.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Failure Analysis,Failure Analysis Testing Laboratory, Failure Analysis Testing Service, Failure Analysis Lab in Chennai, Failure Analysis Lab in India, Failure Analysis Lab in Bangalore.

Started in 2010, as a manifestation of passion by Mr.Sivasubramanian with over 30+ years of experience in Failure Analysis and metallurgical testing across the globe. We are a unique laboratory in India focusing on Failure Analysis and one of the few finest NABL accredited Metallurgical laboratories in the country. Team MTS is well trained and has the ability to conduct metallurgical testing in diverse sectors. http://mts-india.in/ ADDRESS: #37/6, Third Cross Street, Lakshmi Nagar, Porur, Chennai -600116, India. Phone: +91 44 24765675,+91 98417 07777, +91 9841600054 [email protected]

Trending Blogs

Recently Viewed Blogs

Untitled