Car audio - Hifi home - Pro audio components

[nonsolospeakers]

Rega Elicit MK5 integrated stereo amplifier

discover here > https://bit.ly/3e0deg4

The brand new Elicit MK5 Stereo Integrated Amplifier has been designed and built to the highest standards. The redesigned aluminum chassis integrates perfectly with the current Rega line and the Elektronic builds on previous Rega designs by using the multi-award winning Class A/B power amplifier circuit to deliver a powerful 105W per channel into 8Ω to deliver loads (127 W into 6 Ω). Rega engineers have developed a new Rega DAC circuit that offers digital connectivity .

[nonsolospeakers]

DLS Scandcase 3 speakers Kit 3 way 165 mm

Special deal disover more

DLS know that even if you have the best available sources to have the very best sound you need to have absolute control over the reproduction devices.

As speakers are put together from different materials, there is a normal variance between each single unit. Most manufacturers do not have the capability to scientifically measure all individual units they produce, and others simply do not care. Some might say the variances between different drivers from a high-quality producer is not so critical, but for those who demand the absolute best there are no shortcuts.

.

3-way 6.5” extreme competition class speaker kit

Frequency range 50 Hz – 30 kHz

Bass:             matched pairs of Scandinavia 165Wi

Midrange:     matched pairs of Scandinavia 75

Tweeter:       matched pairs of Scandinavia 30

Crossover:    Scandinavia XO-3 Audiophile High grade for semi active 12/12dB with ribbon air coils and 2 step tweeter level select switch

[nonsolospeakers]

Hypex Amplifier Module -- Mono and multichannel

Discover here > https://bit.ly/3ADzSnb

Vedi insights e inserzioni

Metti in evidenza il post

Tutte le reazioni:

11

[nonsolospeakers]

HiVi Swans D3.2MKIII Tower Speakers

https://shorturl.at/sucTl

The HiVi Swan D3.2MKIII is a high-fidelity 3-way floorstanding speaker designed to deliver immersive, full-range audio with exceptional clarity and dynamics. As the third-generation model in the acclaimed D3.2 series, it incorporates advanced driver technology and refined acoustic tuning for audiophile-grade performance.

[nonsolospeakers]

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

The FiiO FT13 are high-end closed-back headphones that combine handcrafted construction from natural purpleheart wood with a sophisticated acoustic architecture featuring a 60mm dynamic driver. The W-shaped diaphragm, made from a composite of wool and wood nanofibers, ensures a wide, dynamic, and controlled frequency response, while the closed structure with a U-shaped damping tube optimizes bass output and reduces internal resonances.

With low impedance and high sensitivity, the FT13 are easy to drive even with portable sources, delivering natural, detailed, and immersive sound. The braided cable made from Furukawa monocrystalline copper and silver-plated OFC copper ensures high-purity signal transmission, while the lambskin and suede earpads offer comfort and acoustic customization.

[nonsolospeakers]

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit: Build your own high-end class D stereo amplifier based on the Nilai technology from

Highlights

Nilai® Class D technology inside

Impressive performance despite load

Neutral and transparent reproduction

Flat, fully load-independent frequency response

Plenty of power combined with high efficiency

Compact design

Carefully selected high-grade components

Balanced XLR input, goldplated binding posts output

12V Trigger

Easy to assemble offers a ready-to-go DIY-experience

.

Characteristics

Item number: Nilai stereo kit

Rated power (SQMW)

2 x 300 watts at 2 ohms

2 x 300 watts at 4 ohms

2 x 260 watts at 8 ohms

minimum load 2 ohms

Signal to Noise Ratio (SNR). 125dB

distortion. 0.0007 THD+N (20 Hz - 20 kHz, 4 ohms)

frequency response. 0Hz - 50kHz

amplifier topology. Nilai®

amplifier classification. Class D

output channels. 2 XLR on / off 2/0

banana plug

power requirement 110/240VAC, 50Hz/60Hz

power connector pluIEC C13

Dimensions (D x W x H) 300x420x80mm

housing material Matte Black Aluminum

Product details

Hypex Nilai500DIY 2CH Nilai® 2x250W Stereo Amplifier

[nonsolospeakers]

Van den Hul 3T The Mountain XLR

SPECIAL DEAL

Van den Hul 3T The Mountain XLR

VAN DEN HUL 3T The MOUNTAIN Hybrid Halogen Free XLR

Our superlative representative of the 3T (balanced) interconnects. Once connected you’ll never want to change to any other cable.

The two center conductors are made of a 900 micron 3T single stranded conductor and individually coated with an extra L. S. C. layer.

Reduced capacitive load due to the enlarged distance between the center conductors and the shield (screen) 

The shielding (screening) consists of four even layers: two made of heavy silver coated high quality copper multi-strand conductors and the other two are made of L. S. C. 

After a run-in (brake-in, burn-in) time of three to five hours you’ll be travelling through the dramatic improvement of the sound transmission. Destination: there where the music was first performed and registered.

.

Specifics:

Design purpose         Interlink

Versions                   Balanced (XLR)

Conductor material    3T

Product range           High-end

Jacket color              orange

Standard sales unit   Only factory terminated, not available on reel.

[nonsolospeakers]

Hypex Amplifier Module -- Mono and multichannel

Discover here > https://www.nonsolospeakers.com/brand/152-hypex-module-amplifiers

[nonsolospeakers]

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Specifications:

5.1.2CH Dolby Atmos Soundbar with wireless surround

Output Power: Total 350W RMS (25W x 6 + 50W + 180W)

Dolby Atmos version 1.8

HDMI 2-in-1-out with CEC / eARC / HDCP2.3

Optical / Bluetooth connection

AUX (3.5mm) / USB (MP3 playback) • LED Display / Touch Key

Metal mesh – matte black / Plastic housing – matte black

Dimensions (W x H x D): Soundbar: 1000 x 67 x 102 mm Subwoofer: 240 x 420 x 240 mm

Accessories included: VDE Power Cord, Wall Brackets, HDMI Cable, Remote Control

This soundbar delivers a premium audio experience, providing powerful and detailed sound for all your entertainment needs

[nonsolospeakers]

Van den Hul 3T The Mountain XLR

SPECIAL DEAL

Van den Hul 3T The Mountain XLR

VAN DEN HUL 3T The MOUNTAIN Hybrid Halogen Free XLR

Our superlative representative of the 3T (balanced) interconnects. Once connected you’ll never want to change to any other cable.

The two center conductors are made of a 900 micron 3T single stranded conductor and individually coated with an extra L. S. C. layer.

Reduced capacitive load due to the enlarged distance between the center conductors and the shield (screen) 

The shielding (screening) consists of four even layers: two made of heavy silver coated high quality copper multi-strand conductors and the other two are made of L. S. C. 

After a run-in (brake-in, burn-in) time of three to five hours you’ll be travelling through the dramatic improvement of the sound transmission. Destination: there where the music was first performed and registered.

.

Specifics:

Design purpose         Interlink

Versions                   Balanced (XLR)

Conductor material    3T

Product range           High-end

Jacket color              orange

Standard sales unit   Only factory terminated, not available on reel.

[nonsolospeakers]

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit: Build your own high-end class D stereo amplifier based on the Nilai technology from

Highlights

Nilai® Class D technology inside

Impressive performance despite load

Neutral and transparent reproduction

Flat, fully load-independent frequency response

Plenty of power combined with high efficiency

Compact design

Carefully selected high-grade components

Balanced XLR input, goldplated binding posts output

12V Trigger

Easy to assemble offers a ready-to-go DIY-experience

.

Characteristics

Item number: Nilai stereo kit

Rated power (SQMW)

2 x 300 watts at 2 ohms

2 x 300 watts at 4 ohms

2 x 260 watts at 8 ohms

minimum load 2 ohms

Signal to Noise Ratio (SNR). 125dB

distortion. 0.0007 THD+N (20 Hz - 20 kHz, 4 ohms)

frequency response. 0Hz - 50kHz

amplifier topology. Nilai®

amplifier classification. Class D

output channels. 2 XLR on / off 2/0

banana plug

power requirement 110/240VAC, 50Hz/60Hz

power connector pluIEC C13

Dimensions (D x W x H) 300x420x80mm

housing material Matte Black Aluminum

Product details

Hypex Nilai500DIY 2CH Nilai® 2x250W Stereo Amplifier

[nonsolospeakers]

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

The FiiO FT13 are high-end closed-back headphones that combine handcrafted construction from natural purpleheart wood with a sophisticated acoustic architecture featuring a 60mm dynamic driver. The W-shaped diaphragm, made from a composite of wool and wood nanofibers, ensures a wide, dynamic, and controlled frequency response, while the closed structure with a U-shaped damping tube optimizes bass output and reduces internal resonances.

With low impedance and high sensitivity, the FT13 are easy to drive even with portable sources, delivering natural, detailed, and immersive sound. The braided cable made from Furukawa monocrystalline copper and silver-plated OFC copper ensures high-purity signal transmission, while the lambskin and suede earpads offer comfort and acoustic customization.

[nonsolospeakers]

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

FiiO FT13-32 N - High-Fidelity Wooden Over-Ear Headphones - Natural

The FiiO FT13 are high-end closed-back headphones that combine handcrafted construction from natural purpleheart wood with a sophisticated acoustic architecture featuring a 60mm dynamic driver. The W-shaped diaphragm, made from a composite of wool and wood nanofibers, ensures a wide, dynamic, and controlled frequency response, while the closed structure with a U-shaped damping tube optimizes bass output and reduces internal resonances.

With low impedance and high sensitivity, the FT13 are easy to drive even with portable sources, delivering natural, detailed, and immersive sound. The braided cable made from Furukawa monocrystalline copper and silver-plated OFC copper ensures high-purity signal transmission, while the lambskin and suede earpads offer comfort and acoustic customization.

[nonsolospeakers]

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit

Hypex Nilai500DIY 2-channel Nilai Stereo amplifier kit: Build your own high-end class D stereo amplifier based on the Nilai technology from

Highlights

Nilai® Class D technology inside

Impressive performance despite load

Neutral and transparent reproduction

Flat, fully load-independent frequency response

Plenty of power combined with high efficiency

Compact design

Carefully selected high-grade components

Balanced XLR input, goldplated binding posts output

12V Trigger

Easy to assemble offers a ready-to-go DIY-experience

.

Characteristics

Item number: Nilai stereo kit

Rated power (SQMW)

2 x 300 watts at 2 ohms

2 x 300 watts at 4 ohms

2 x 260 watts at 8 ohms

minimum load 2 ohms

Signal to Noise Ratio (SNR). 125dB

distortion. 0.0007 THD+N (20 Hz - 20 kHz, 4 ohms)

frequency response. 0Hz - 50kHz

amplifier topology. Nilai®

amplifier classification. Class D

output channels. 2 XLR on / off 2/0

banana plug

power requirement 110/240VAC, 50Hz/60Hz

power connector pluIEC C13

Dimensions (D x W x H) 300x420x80mm

housing material Matte Black Aluminum

Product details

Hypex Nilai500DIY 2CH Nilai® 2x250W Stereo Amplifier

[nonsolospeakers]

Van den Hul 3T The Mountain XLR

SPECIAL DEAL

Van den Hul 3T The Mountain XLR

VAN DEN HUL 3T The MOUNTAIN Hybrid Halogen Free XLR

Our superlative representative of the 3T (balanced) interconnects. Once connected you’ll never want to change to any other cable.

The two center conductors are made of a 900 micron 3T single stranded conductor and individually coated with an extra L. S. C. layer.

Reduced capacitive load due to the enlarged distance between the center conductors and the shield (screen) 

The shielding (screening) consists of four even layers: two made of heavy silver coated high quality copper multi-strand conductors and the other two are made of L. S. C. 

After a run-in (brake-in, burn-in) time of three to five hours you’ll be travelling through the dramatic improvement of the sound transmission. Destination: there where the music was first performed and registered.

.

Specifics:

Design purpose         Interlink

Versions                   Balanced (XLR)

Conductor material    3T

Product range           High-end

Jacket color              orange

Standard sales unit   Only factory terminated, not available on reel.

[nonsolospeakers]

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Nakamichi Apollo 550 5.1.2 Dolby Atmos Soundbar

Specifications:

5.1.2CH Dolby Atmos Soundbar with wireless surround

Output Power: Total 350W RMS (25W x 6 + 50W + 180W)

Dolby Atmos version 1.8

HDMI 2-in-1-out with CEC / eARC / HDCP2.3

Optical / Bluetooth connection

AUX (3.5mm) / USB (MP3 playback) • LED Display / Touch Key

Metal mesh – matte black / Plastic housing – matte black

Dimensions (W x H x D): Soundbar: 1000 x 67 x 102 mm Subwoofer: 240 x 420 x 240 mm

Accessories included: VDE Power Cord, Wall Brackets, HDMI Cable, Remote Control

This soundbar delivers a premium audio experience, providing powerful and detailed sound for all your entertainment needs

[nonsolospeakers]

Rebec CS1 monoblock 2st (set of pair)

The Rebec CS1 Monoblock is a HighEnd car amplifier designed for audio enthusiasts who demand superior performance and sound quality in their vehicle audio system. With its Class AB design, this power amplifier combines efficiency with exceptional sound quality, making it ideal for driving both speakers and subwoofers with precision and power.