Untitled

[peterwang001]

DTH BITS

Applications • Under-ground mining • Quarry benching operations • Water well drilling

DTH Drilling tools | DTH Bits High Quality, Competitive Price, Problems Solve Ability, Fast Delivery Time。

[peterwang001]

3 Wings Step Water Well Drilling Drag Bit are the perfect solutions for soil, sand, sticky clay, and grouting drilling. They are designed for higher penetration rates in softer unconsolidated formations, provide lower costs per foot. Drag Bits are more aggressive than tricone bits, and have higher speed while lower cutting action.

# Drag Bit

[peterwang001]

[peterwang001]

3 Wings Step Water Well Drilling Drag Bit are the perfect solutions for soil, sand, sticky clay, and grouting drilling. They are designed for higher penetration rates in softer unconsolidated formations, provide lower costs per foot. Drag Bits are more aggressive than tricone bits, and have higher speed while lower cutting action.

# Drag Bit

[peterwang001]

CO2 rock blasting VS explosive blasting

CO2 rock blasting is safer and more environmentally friendly than explosive blasting

[peterwang001]

Cracking agent for rock & concrete breaking solution

expansive mortar chemical that cracks rocks and concrete, without using explosives. It is a concrete cutting, granite breaking and general demolition solution. This non-explosive demolition agent is easy to use, cost effective and a safer option for silently breaking up hard materials like rock or concrete. Simply drill, mix and pour.

# Cracking agent

# concrete breaking

[peterwang001]

Plug hole drill rod

Plug hole rod are normally produces Hexagon 22*108 Drill Steel, where the dimension given are measured across the flat of the hexagon.

Plug hole rod are normally produces Hexagon 22*108 Drill Steel, where the dimension given are measured across the flat of the hexagon.

Plug hole rod are a fixed length with a shank at one end and a bit at the other, and are able to drill to a depth equivalent to their effective length.

The bit may consist of single chisel shaped tungsten carbide insert or three such inserts.

To drill deep holes, the rods are designed to be used in a series where the lengh of any rod used in longer than the one used just before it.

To do this ,a series of rods must be produced so that the bit diameter is reduced for each increase in lengh if rod to prevent jamming of the bit in the hole.

[peterwang001]

Integral Drill rod

Integral Drill Steel is used by a hand held drill machine in Under-ground mining and for small hole drilling. Shank size :Hex19*108mm;Hex22*108mm;Hex25*108mm Head Diameter:26mm~45mm Effective length:600~6000mm

Integral Drill Steel is used by a hand held drill machine in Under-ground mining and for small hole drilling, equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. It can reduces the expense of impact energy, improves the drilling speed and efficiency, also it can be used for drilling bore hole diameter from 30mm to 41mm usually. Regarding Integral drill steels，the quality of a steel material and a tungsten carbide is very important to get good drilling performance.