#4-20ma

[automationforum]

DIFFERENCE BETWEEN CALIBRATION OF A HART & CONVENTIONAL INSTRUMENT

DIFFERENCE BETWEEN CALIBRATION OF A HART & CONVENTIONAL INSTRUMENT

INTRODUCTION

There are smart and conventional instruments and the calibration procedure of these types of instruments are entirely different in this session we are going to discuss about the difference between calibration of a HART &conventional instrument

CALIBRATING A CONVENTIONAL INSTRUMENT For a conventional 4-20 mAinstrument, a multiple point test that stimulates the input and measures the…

View On WordPress

[automationforum]

Types of Signal Transmission

Types of Signal Transmission

Introduction The secondary electronics of a transmitter amplify and condition the weak electrical signals generated by the sensor, so that the signals can be sent over long distances without being degraded by noise, and thus the signals can be used to control devices such as indicators, recorders and controllers. Transmitters use various techniques to transmit their signal. This section describes…

View On WordPress

[automationforum]

How a 4-20 mA current loop works

How a 4-20 mA current loop works

How a current loop works

A typical 4-20 mA current loop circuit is composed of four individual elements: a sensor / transducer; a voltage to current converter (commonly referred to as a transmitter and / or signal conditioner); a loop power supply; and a receiver / monitor. In loop-fed applications, the four elements are connected in a closed circuit, series, loop configuration.

1.Sensor

First,…

View On WordPress