#awei a780bl

[murumokirby360]

My Awei A780BL wireless headphone's 2 year condition (w/ my Paper Dolls) - [Dec 15, 2021]

Hello! This is my last post in 2021; as we say goodbye to this year and a new year is coming up on the horizon. Anyway, I want a talk about my recent used wireless Bluetooth headphone; the Awei A780BL.🎧

So without further ado, let's get started:

1st [Top] to 4th Images:

• Now, it has been 2 years since May 30, 2019. At look at it now; my headphone has scratches (well a bit), dusts, messy, and even glued by using sticky tapes & super glue, well, for the most part. Let me explain.

• First off 👆, the plastic part on the adjustable headbands snapped. But the metal piece on each side (sandwiched between the aforementioned plastic part) still intact, so I used scotch sticky tapes on the right side & duct tape on the left side. Weird, huh...

• Second ✌️, the left side of the ear cover also snapped from me accidentally pulled. Originally I taped all around with small metal bends on the left side but it doesn't seem do the job, and it looks pretty bad. (Which I have that picture right here [CLICK ME!]) So I removed the tape and I applied super glue on the broken part, then I used paper long tail clips to prevent separate & let it for overnight until it's completely sticky secured. Now that the left ear cover is cured, well, except that foldable joint, which is now wobble than it used to. I decided to disassemble the left ear cover by unscrew & it turns out that the plastic part from inside broke. So, what to do? I tried stuffing by tiny size folded paper but the wobbly still there. Nah, whatever. At least the wire audio remains functional after fixing.

• The right ear cover on the hand still intact. Well, except one: the functional buttons. Here are the ff. issues I've encountered:

5th & 6th Images:

○ Power button 🔘: It's hard to press now when I try to turn on than it used to. Plus, it takes time to press for about 5 to 6 seconds for turn on / turn off my headphone. And it's quite confusing on whether I should press hard or gentle, because I don't want to broke the power button. Without it, my headphone is now useless, but at least I could switch to wire mode with my audio jack cable.

○ Volume & play/pause buttons ⏮⏯⏭: When I try to adjust the volume (whether low or high) from my headphone it automatically shuts off (while connecting my computer or my phone). Weird. It doesn't seem right though. Same goes to play/pause buttons. It seems I won't be touching these in the future.

BTW: I haven't touch the TF-Card slot from the wireless headphone. Honestly, I don't usually inserting my Micro SD Card on my headphone, so yeah.

○ (And finally) Battery 🔋: Ummm... Okay, let's talk about battery life from A780bl headphone. I usually watching videos for about 7 to 8 hours per week and sometimes 3 to 4 hours, then when I hear "battery low" from my headphone I act quickly by switching wire mode with my audio jack to continue watching. And when I'm done, I charge my headphone for long hours. It's weird, according to the official manual it's said that the charging time is 2 hours. Well, I hate to tell ya but I charge it for 12 hours. I mean, c'mon, make up your own mind, Awei. The A780bl's battery life should known better, but otherwise it's a decent job (I guess).

7th & 8th Images:

• As for the soft ear pads and headband pads on the top, they're quite messy & cover in dusts.🦠️ Plus it smells sweat, hey, what do you expect. As of now, I don't see any damage or ripped whatsoever. And yes, these ear pads are my prefer when it comes to super budget over-the-ear headphones. If I have a premium expensive wireless over-the-ear headphone then it'll be far better than my super budget headphone.

Overall:

• With all of the issues, damages & others, my wireless headphone from Awei still functional as ever after 2 years of used. And yet I'm still using it to this day. The only thing that I never talk about is the sound quality, because it's the same as before without damaging the audio drive or cut from the wire inside. And that's a good thing. I still love my old Awei headphones, and while I have another one from ZNT brand, I prefer my one until the end. And if my old Awei headphone is completely busted, then I guess I'll embrace my new headphone from ZNT [CLICK ME!].

9th Image: • Even with damage conditions, my paper dolls can still fit in on my headphones. So, what you listening, you two? Anime song? 🎌🎵 Love song? 💕🎵 Rock?🎸🎵 Or maybe, cooking music? 🍴🎵 Probably the latter.😉🎧 Well, that's the end of my topic. If you want to see more about my Awei A780BL headphones, then please [CLICK ME!].

Tagged:@lordromulus90, @bryan360 ,@carmenramcat, @neutralized-l

[murumokirby360]

My ZNT SoundFit wireless headphone/headset review (w/ my Paper Dolls) - Part 3 (Final) [Sept 23, 2021] (My photos and recorded video)

This is Part 3 (and final) of my ZNT SoundFit wireless headphone/headset review (with my paper dolls).🎧🙂

Okay, remember what I said that I'll be a side comparison with my old Awei A780BL wireless headphone/headset on Wednesday 🎧🎧, and on Saturday will be my wireless connection (via Bluetooth) and wired audio test with my phone and PC (Windows 10)📲🖥? Well, it's time to make changes because I'm combining these two into one single finale package, right now! So I can have a free time and next week I'll submit my deviation post from my dA account.

If you haven't seen my Part 2, then please [CLICK ME!].

BTW: I will ignore the battery life and microphone topic for ZNT SoundFit (and also for Awei A780BL, too) because I'm solely focused on wireless connectivity and the sound quality. Uh yeah and also for gaming when connecting wireless via Bluetooth, because there is always have latency during playing games, whether from PC or from Smartphone.

So without further ado, let's get started:

Recorded Video🎦📲: [Please watch]

• As you see from my recorded video, I decided to go wireless connection test first with my Honor 8C smartphone and my Windows 10 PC (my UGREEN USB Bluetooth Adapter) using Bluetooth connection 📲🖥. As you can see I'm trying to turn on my ZNT Soundfit by pressing the power button and hear the female voice from the right earpad/earcup. Plus the led light is blinking red and blue colors.

• [Connecting with my smartphone 📲]: Once I connected through my smartphone I'm now ready to wear and hear the sounds from my ZNT SoundFit.🎧🎶 But first I'm trying to test their buttons and see if it's working... Well at first glance, it won't work well when I don't play any music. And when I play music, all three buttons are now usable (e.g. volume up and down with pressing + and -, and the power button that act as a pause/play). Speaking of which, the ZNT SoundFit focuses on bass rather than all balance. When I hear any music genre (either when I'm using a music app or Youtube), they always have that thump on both earpads/earcup. Uh yeah, and when I crack up the volume it's sort of like vibrating, and it can hear from my earpads/earcups during public spaces. Now I'm not saying that this is a bad thing, but rather quite decent. As for the wired mode, I'll get to that later.

• [Connecting with my computer🖥]: Now onto my Windows PC. With my UGREEN USB Bluetooth Adapter already plugged in, I'm ready to connect. But then, I'm having a problem with the sound... When I click the volume adjuster I can't hear from these two earcups, even if I pressed buttons for the volume it won't work at all, until a few minutes later. And that's without opening a music app or play videos on Youtube, by the way. So now I'm ready to hear some more music via PC wireless connectivity... How was it? Well, after I play some music genre (from Windows 10's Groove Music) and sometimes videos from Youtube, it is literally the same as before. I even tested on this YT video [CLICK ME!]. The ZNT SoundFit really does focus on bass sound, but I'm okay with their sound quality.

1st to 4th Image(s):↓

• [1st & 2nd Images]: Here you see my ZNT SoundFit is connected via wired mode from the included male-to-male 3.5mm audio cable through my Honor 8C smartphone. Hmmm... Their sound from the wired mode seems quite right, but not in the balance despite the aforementioned bass. My paper dolls approve for the sound quality though, both in wireless and wiring mode. Well good for you. It's a good thing that in wired mode won't have the same problem as the wireless mode when I pumped up the volume.

• [3rd & 4th Images]: Now for my Windows 10 PC. Well... I would say, it's the same story as my smartphone one. Now I don't usually wear headphones during my gameplay (e.g. playing game emulators, online games), and as far as I know, I don't see any problem nonetheless. Just to make sure that my headphones are fully charged when I go in wireless Bluetooth.🎮🎧 My paper dolls still wearing my new headphones, and they want me to play online games while they're listening.

5th to 9th Image(s):↓

• [5th & 6th Images]: Let's move on to the comparison. On the left is my old Awei A780BL, while on the right is my fresh ZNT SoundFit. And it seems that my old Awei has seen better days, look at it... It has more scars and dirt than before, and I can't explain everything why. But hey, miraculously, it functions very well. So I'm glad.

• [7th & 8th Images]: Here's an example via close-up. My Awei headphone's adjuster had duct-taped on each side with different variants. I try to use super glue but it won't stick together.

• [9th Image]: Finally, here's the right earpad/earcup between ZNT and Awei. Aside from dust-covered in some parts of my old Awei, there's also the melted part, which I glued with super glue and reattached successfully. Usually, it covers a lot of sticky tapes but now I remove it. Uh yeah, and it wobbles because the inside part is snapped.

10th Image:↓

• Now when it comes to comfort on my head and not mention my ears, the ZNT SoundFit headphones fit well... But sometimes too tight when I adjust the measure. Back then when I'm wearing my old Awei A780BL it fits just right and to this day my signature measurement still remains after I've made accidental damages for two years.

• Usually, my paper dolls are sharing together with one headphone, but since I have two headphones, they're now enjoying their music with each other! How lovely, isn't it!?

BTW: The included audio cable from ZNT is much longer than my Awei audio cable [AUX-001], at about 1.5 meters long compare to Awei's 1.0 meter. (Well... Sort of.)

🎶Sound Comparison🎧:

• Now before I go to my overall conclusion (for my ZNT SoundFit), let's talk about the sound comparison between my ZNT SoundFit and my old Awei A780BL wireless headphones. As I said before, the sound signature of the ZNT SoundFit is all about bass over other tones, whereas the Awei A780BL is a balanced tone. And in my experience between these two, I still prefer my old Awei A780BL over my ZNT SoundFit; despite Awei's music tones are decent present than the ZNT's. I mean, at first glance I thought that the ZNT SoundFit headphones will be my replacement for my old Awei A780BL, but my mind is changed. After I've tested my two aforementioned devices using my ZNT SoundFit headphones (wireless and wired), I hear a lot of basses in every music genre. Well... Not everyone but still. Again, I don't have a problem with the ZNT's SoundFit, but if only could tweak the bass down it'll become improved.

• Now let's talk about my old Awei A780BL. While the sound balance is quite impressive for me, I have some floss in my previous years of Awei's A780BL usage. For one, when I connect to my phone and start listening to music it tends to make hiccup sounds; even if I'm very close to my smartphone, the problem still remains. Two, when I press the pause/play button while connecting wireless via my Windows 10 PC It automatically shut off and I have to reconnect by pressing and hold the power button, which is very annoying. And speaking of the power button, number three is that aforementioned. Because I'm struggling to turn on and off with my big thumb, and who knows, the power button will be snapped inside - making my Awei A780BL totally useless in wireless mode. So I need to be careful by not forcing it too much with my right thumb.

UPDATE [Sept. 27th, 2021]:

• The singing voice from wearing my SoundFit headphone is pretty decent on both wired and wireless mode. Also, the pump-up volume high in wireless mode is off the charts, and not in a good way. Because it can hear the music in close range during public. At least it won't happen in wired mode and I can feel free to pump up the volume. As for the connectivity, it's pretty quick to connect on my either smartphone and PC than my old Awei A780BL. And although it didn't offer double wireless connection devices simultaneously because SoundFit uses Bluetooth ver. 4.1 (which is quite old) it's still pretty solid connectivity. As for its wireless connection range is about 20+ meters, which is the same range as my old Awei headphones (from using my PC with Ugreen USB Bluetooth Adapter); unlike my old Awei however, my ZNT Soundfit won't have sound hiccups when I play videos or listening some music... Well, at least for now but only time will tell if my SoundFit has sound hiccups or not.

Overall:

• It was a good sound test with my ZNT SoundFit headphones and doing a comparison with my old Awei A780BL. The latter is still my favorite balanced sound wireless headphones over my ZNT SoundFit. And don't get me wrong, I'm enjoyed wearing and listening to music, with my current owned ZNT headphones. But with muffled sound, too much bass, and the volume is way high in wireless mode I expect to tweak the music gears a little bit.🔧🎶 But otherwise, it's a good headphone that I purchased.👍

*Sigh*... Damn! I made another pretty long lecture review of my ZNT SoundFit, and I don't have enough time to put some emojis on every part, so I'm only put a few. I deserve a big rest, but I need to get up because I have to share my main social media accounts. And after that, I want to drink a nice cup of warm chocolate milk! Mmmmm, tasty! My paper doll loves chocolate milk, you know!😋🍫🥛

Anyways, that is the end of my topic.

And if you haven’t seen my previous part, then I’ll provide a link down below.↓😉

My ZNT SoundFit wireless headphone/headset:

• Opening my parcel [Sept 4th, 2021]

• Part 1 [Sept 10th, 2021] • Part 2 [Sept 18th, 2021]

Tagged: @bryan360, @lordromulus90, @carmenramcat

[murumokirby360]

My Awei A780BL's 2 year condition by ~murumokirby360

It's has been 2 years, and the audio still functional as well. 😊🎧🎶

If you want more the details, then please [CLICK ME!].

[murumokirby360]

My Awei AUX-001 Auxiliary / Audio Cables with my Paper Dolls (Chowder and Panini) and two Awei items - Part 2 [Nov.12,2019]

Here’s my part 2 of my 2 Awei AUX-001 audio cables w/ my Paper Dolls and also my related 2 Awei items - 🎧  A780BL Bluetooth Headphone on the left and 📻 Y200 Bluetooth Speaker on the right.😊

As you can see it both of my items are now fitted with the same brand, as for their sound quality with the aux cable connected to my devices (namely; laptop, smartphones and dualshock 4 controller) - it was totally fine as always.  🔊🎶 Even my paper dolls seems to be delightful the sound quality, heheh. ^^

Also on the 5th Image you see that the right side of headphone, the plastic part was completely snapped and sliding inside the headphone compare to the left side which is still intact. Sure it did not affect the sound quality but the wire has a little bit damage revealing a little copper wire so I have to taped in just to sure that will not be broken or cut off the audio. As a warning without the plastic band part I need to be careful the metal band by less adjusting and less bend or else it’ll the same fate and it’s completely useless, though I could find the way somehow but if not I gonna need another headphone with a better strength material used although I need an extra buck. But as of now my A780BL Headphone is still fine even with a medium damage to the plastic part but still I need to be careful the metal band - hope the lifespan will be last.

So that’s all for now and hope the last part will be my comparison with my old aux cable (came from the included box from A780BL) and some more photos as well, so more on that soon.

NOTE: As for the Lazada 11.11 one day big sale well that’s gonna be coming up soon this month, seems I have a lot to talk about it...

BTW : If you want to see the item stock on Lazada then please [CLICK ME].

Previous: 

• Awei AUX-001 ○ Opening parcel ○ Revealed (Part 1)

• Awei A780BL ○ Revealing Parcel ○ Opening Parcel [Video] ○ Part 1 ○ Part 2 ○ Part 3 ○ Bluetooth Connectivity Test ○ 1st Time Charging

• Awei Y200 ○ Part 1 [Unboxing] ○ Part 2 [Connectivity Test] ○ Part 3 [Sound Test] ○ Part 4 [Sound Test using Aux Cable]

[murumokirby360]

My Awei AUX-001 Auxiliary / Audio Cables with my Paper Dolls (Chowder and Panini) and two Awei items - Part 3 - Final [Nov. 16,2019]

Here’s my final part of my 2 Awei audio cables w/ my Paper Dolls and also my related 2 Awei items - 🎧  A780BL Bluetooth Headphone on the left and 📻 Y200 Bluetooth Speaker on the right.😊 With aux cable differences and my concern about my A780BL’s damage.

From 1st to 4th images: • As you see these images both my Y200 speaker and A780BL headphone w/ my Aux-001 audio cables are connected through my functional devices - (Lenovo G470) laptop and (Honor 8C) smartphone and vice versa. Seems my paper dolls are enjoying listening music / videos, heheh. 🔊🎶 😁

5th image: • Cable comparison with the other audio cable from the A780BL’s accessory which is on the right. As of today my old audio cable is sadly broken and completely unused despite I’ve been using it for a long time. As a matter of fact intends to malfunctioning the cable so I need to twist and bend the audio jack in order to work before it finally broke the audio. So it’s a good thing I have another one after I’ve using the included audio cable for a long month since May of this year.

From 6th to 8th images: • As for my A780BL’s concerns well I’ve finally found the solution, by using a scotch tape and duct sandwich together between metal band and broken plastic part. In fact just before to apply it I carefully adjust down and reveal the end part of the metal band and try to reach that broken plastic part by lifting using a stick object, I’d just be sure not to damage the audio cable (or else the right audio is completely broke much like my old audio cable). After i apply the scotch tape I try to adjust upward very carefully and surprisingly very tight and very secured which is a good thing -  I mean apply two pieces of scotch tapes on the broken part makes solve my problem for my headphone. I hope I could do the same for the other side, after all its completely loose and always falling despite long used but that’s gonna very someday. But nonetheless take a look for a comparison between un-damage part on the left and fixed on the right. Overall again I hope the lifespan will be last and I’m so happy the result. 😊

So that’s the end of this topic and now I could continue of my installing cord protector which will be for the next week or few days, I you haven’t seen my posts then please [CLICK ME!]. 😉

BTW : If you want to see the item stock on Lazada then please [CLICK ME].

Previous:

• Awei AUX-001 ○ Opening parcel ○ Revealed (Part 1)  ○ Plug In test (Part 2)

• Awei A780BL ○ Revealing Parcel ○ Opening Parcel [Video] ○ Part 1 ○ Part 2 ○ Part 3 ○ Bluetooth Connectivity Test ○ 1st Time Charging

• Awei Y200 ○ Part 1 [Unboxing] ○ Part 2 [Connectivity Test] ○ Part 3 [Sound Test] ○ Part 4 [Sound Test using Aux Cable]

[murumokirby360]

My Awei AUX-001 Audio Cables by ~murumokirby360

For my topics then please check out my posts down below. ↓😉 •Opening Parcel [Nov 6,2019] •My Awei AUX-001 Auxiliary / Audio Cables with my Paper Dolls (Chowder and Panini) - Part 1 [Nov. 7,2019] •My Awei AUX-001 Auxiliary / Audio Cables with my Paper Dolls (Chowder and Panini) and two Awei items - Part 2 [Nov.12,2019] •My Awei AUX-001 Auxiliary / Audio Cables with my Paper Dolls (Chowder and Panini) and two Awei items - Part 3 - Final [Nov. 16,2019]

[murumokirby360]

My New Headphone - Awei A780BL w/ Chowder and Panini (May 30,2019) [Part 3 - Final]

Here are my last part for my new headphone Awei A780BL.🎧😁

There’s also a bold plastic beside the metal part of the headphone, if only a full metal part could be better but I guess this is okay. Can’t argue the design and quality though.😊 Here’s also the rest of my photos, both night and normal mode w/ a flash; I guess it’s nothing special. Except my beloved Paper Dolls appreciates my new smartphone and can’t wait to try out the sound quality.😁

Hey speaking of, I’ll be recorded another video for the bluetooth connection with my new smartphone the Honor 8C and my thoughts about the sound quality coming tomorrow or I should say next month (June). 🙂

So that’s all I could say now. In case that you already ,missed it I’ve already provide some links down below. ↓😉

Previous: Revealing Parcel, Opening Parcel [Video], Part 1, Part 2

[murumokirby360]

My New Headphone - Awei A780BL first time charging

Here’s my Awei A780BL Wireless Headphone with my two trusty Anker items I need; At the top - Anker Powerport 2 ,and the bottom - Anker Powerline [Micro USB Cable for Android]. Also they’re all matched perfectly “Blacked” and seems my paper dolls liked the match color. 🎧😁

Okay so I’ve been using it a while. In fact a few weeks ago It finally drained out batteries so I’ll be go on using wire mode for a long days (or a week to be equivalent); still, both sounds for wireless and wired mode are pretty good albeit the right sound cuff sounds louder overall than the left, but it’s a “Stereo Type Headphones” that’s what it is about. So now I’m done using it for a long periods time to bust out my two Anker items which I mentioned before to charged up the headphone’s battery capacity. I began to plugged in the charger through my headphones at 12:24am with a red indicator light glow, so while I’m wait I’m made a bit fun with my paper dolls which you can see my images like this example. Trying to wear and sandwiching between the paper dolls and over ear cuffs - *sigh* I feel remember this resemble from my old beats solo HD [which you can check out by CLICKING ME]. Also I did mentioned I was watching something... Mmm I would tell so - I’m watching Wrestling Pay-per-view event (you know the one, so guest yourself). So after three hours I check again and it seems fully charged because the red light indicator completely shut, much like my current Awei Y200 bluetooth speaker. I could wish add a green indicator light that understands / signed “full charge” for a better than immediate shut the red indicator light for both of my Awei items but I guess it didn’t happened,nah *shrug* all well... But nonetheless I’m now using it again for a wireless headphone on my three main techs. 

So that’s all I could say now. In case that you already ,missed it I’ve already provide some links down below. ↓😉

Previous: Revealing Parcel Opening Parcel [Video] Part 1 Part 2 Part 3 Bluetooth Connectivity Test