BABA 850AD SMD REWORK STATION:
BABA 850AD SMD Rework Station or Hot Air Blower is equipment needed for de-soldering and Soldering of IC Components or Chips and BGA while mobile phone repairing and other PCB Repair.
Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards (PCBs). An electronic device so made is called a surface-mount device.
BABA 850 AD SMD Rework Station is best quality and most sellable for Mobile Phone Repairing.
What is the use of BABA 850 AD SMD REWORK STATION?
BABA 850 AD SMD Rework Station or Hot Air Blower is equipment needed for De-soldering and Soldering of IC Components or Chips and BGA while mobile phone repairing and other PCB Repair. Here we learn about Best SMD Rework Station Brands and Models and How to Use it for Soldering and Desoldering of IC.
Description about SMD Rework Station:
In BABA 850 AD SMD Rework Station or hot air blower, there are two control knobs.
1. Control knob is to control flow of Hot Air
2. Other control knob is used to control temperature.
Hot air flows through nozzle attached to the handle. This hot air helps to melt solder paste beneath the IC. An SMD Rework Station is also used as BGA Rework Station using some additional equipment and set-up such as a PCB Holder, Stand for the Rework Station and a Pre-heater to give heat from the bottom.
How to Use BABA 850 AD SMD Rework Station?
· Plug in the power cord of the station and switch ON.
· Now switch ON the Power Switch of the Station.
· Adjust the Temperature and Air Pressure. Temperature and Air Pressure or Air Flow must be balanced properly for proper soldering and desoldering. Too much heat and less air flow will produce too much heat that can damage the PCB of the Mobile Phone. Similarly less heat and too much air pressure will lead to improper desoldering and soldering.
· Most such Stations have automatic power cut feature. This means that when the handle is placed on the holder power gets off.
· When repairing is done, switch OFF the station. The station will now automatically blow cool air so that the heater inside the handle gets cool and do not cause any damage.
· Tip: When soldering or desoldering, always try to preheat the PCB by giving heat from some height and then gradually bring down the handle of the station. If you give sudden heat to the component of the PCB then other components and the PCB itself can get damaged due to thermal chock.
We are having wide variety of SMD rework stations. For more details visit our online store:
https://www.babaocamachine.com/product-category/smd-rework-station/page/1/
For more mobile repairing machines and tools visit: https://www.babaocamachine.com
For dealership of BABATOOLS: 9311172000
