IVOCLAR-VIVADENT IPS E.MAX CERAM SELECTION KIT Description: Low-fusing nano-fluor-apatite glass ceramic used to veneer and characterise restorations manufactured using the press- and/or CAD/CAM technology. Due to the optimised combination of low firing temperature (730 °C) and a CTE of 9.5 x 10⁻⁶K⁻¹ (100-400 °C) the material is suitable for lithium disilicate glass ceramic and ZrO₂. Advantages: One layering porcelain for lithium disilicate glass ceramic and ZrO₂; Precise colour matching and the same clinical behaviour – regardless of the frame; Nano-fluor-apatite for highly aesthetic properties; High light conductivity with higher fluorescence at the same time. Indications: Characterisation and veneering of restorations made of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD und IPS ZirCAD; Characterisation and veneering of ZrO₂ frames in the CTE range 10.5 to 11.0 x 10⁻⁶K⁻¹ (25-500 °C); Layered veneers on refractory die material; Shaping of gingival areas of restorations made from IPS e.max ZirCAD and IPS e.max ZirPress. Physical data: CTE 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400 °C); firing temperature 730 °C (1st dentine); flexural strength (biaxial) ≥ 50 N/mm²; chemical solubility < 100 µg/cm². Selection kit: 6 Selection special enamel (aqua, citrine, honey, apricot, quartz, diamond) 5 g each; 3 Selection light reflector (cream, salmon, silk) 5 g each; 3 Selection light absorber (fog, lavender, taupe) 5 g each. Buy at : https://www.dentaltrademart.com/ips-e-max-ceram-selection-kit.html #dental #ceramickit #ceramics #labceramic #porcelain #selectionkit #ivoclar #ivoclarselectionkit #ivoclarvivadent #matchingcolor #dentallabproduct #dentallab #dentistry #dentalwork #dentalart #dentalpractice #dentaltrademart https://www.instagram.com/p/CkZ-MxlupzP/?igshid=NGJjMDIxMWI=
