Dust Sensor Module DSM501B
Dust Sensor Module DSM501B Description
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited.
Dust Sensor Module DSM501BType:
DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH).
Dust Sensor Module DSM501B Electrical characteristics:
Supply voltage
DC5V±10%
Power consumption
90mA
Operating temperature range
-10~ +65°C
Operating humidity range
95%RH or less (without dew condensation)
Recommend storage condition
-20~ +80°C
Dimension
W59 * H45 * D20 (mm)
Detectable particle size
approx. 1um (minimum)
Detectable range of concentration
0 ~ 1.4mg/m3
Output signal
PWM (pulse width modulation)
Time for stabilization
1 minute after power turned on
Sensor characteristics
To be maintained in between the upper limit and
lower limit of the standard dust sensor unit
Dust Sensor Module DSM501BFeatures:
• PWM output • Easy installation • Single power supply • Compact size and lightweight Dust Sensor Module DSM501B Application:
• Ventilator etc • Air conditioner • Air quality monitor • Air cleaner or Air purifier