Bought this 1991 Nissan 180sx in may to have for a fun track/street car. After realizing the sr20 that was in it was pretty much no good. I decided to change it up a bit and dove in head first. I kept it kind of a secret for a long time. I had the engine home for another project but decided it needed to go in this instead. I ended up buying a #fueledracing swap kit with engine mounts and tranny crossmember. I had the engine in the car a short while after. It sat that way until just before Christmas when I decided to put some serious time into it. A month later it's up and running and ready for some torture this summer. It's a stock Chevy 6.0 lq4. Ls1 corvette intake manifold. Ported and polished throttle body. Holley 48lb injectors. Holley fuel rails. Walbro 255lph fuel pump. Msd spark plug wires. Aem fuel pressure regulator. Aeromotive fuel pressure gauge. All the black nylons braided line and AN fittings are all from vibrant performance. Greddy oil cooler/ oil filter relocation kit. Mishimoto aluminum rad and dual fan/shroud kit. Accessory drive is all from a 2010 camaro ss. Summit racing mini starter. 2000 camaro ws6 t56 transmission,clutch,flywheel and pressure plate. Wildwood clutch master cylinder. Custom made clutch pedal assembly. Customs made exhaust. Custom made shifter assembly. PST custom made driveshaft. Moroso swap oil pan. Custom made cold air intake. Aem dry flow filter. Custom made engine harness and fues/relay panel. The car also has tien coilovers. 5 lug conversion with r33 gtr brakes. Stainless steel stoptech brake hoses. Back half roll cage. And some other little odds and ends. It's not perfect. But i built it for me. The car is tuned with hp tuners at #ravenautosports. I would like to thank first off my girlfriend for putting up with me and the car lol. She's a saint @brittfindlay But I also couldn't have done it without the help and support of a few people. James at raven Autosports. For allowing me to work on it for countless hours at work and tuning it. @jeremy_gass_e30 for some ideas and help pointing me in the right direction for parts and information. @rossabal @crouse.ajc for some ideas and some help. Thanks guys! (at Raven Autosports)
