#infinity train cosplay

[theartofeverything]

Sooooooo… I tried a thing. ‘Twas an interesting experiment. There are so many different mediums going on in this image 😆 Behold, Lake?

[trojanteapot]

Infinity Train Boots!

Made these a while back as part of my Simon cosplay, must have been almost a month, but I didn't post the process!

(EDIT: hey I did some fixing up of my cosplay which you can see here in this post!)

Not actually sure if anybody would care because it's so niche, unlike my Spider-Gwen suit, but I did write about how I did the Infinity Train harpoon pack, so I'll discuss this too!

STEP 0: Acquire reference pictures:

Yep, pretty straightforward.

Note that Simon's boots have an extra bar/strap thingy, whereas Ryan and Min-Gi's do not.

I didn't include it because it kinda looks ugly and I didn't know how fragile the strap might be.

NEXT!

STEP 1: Acquire Boots!

I got these MIA boots from Journeys Canada. They only cost around 60 bucks which is a bit pricey for cosplay, but I'm not about to go thrift shopping when I'm in a time crunch and I can just order online and get free delivery within 2 days. (Also these days 60 bucks for boots from a retail store is considered cheap. Inflation is nasty.)

They came with these cardboard thingies inside to keep the structure of the boots. They have "left" and "right" written on them in Chinese which was helpful for me when I got a bit confused about which side was which.

Save those for later. You'll need them.

STEP 2: Paint the soles silver

Literally any acrylic silver paint works. May take several layers. Make sure to put masking tape around the top edge of the soles.

I didn't use a primer on the base but you probably should. Any white acrylic paint or Gesso would do and you wouldn't need like 8 coats of silver. Do as I say not as I do.

And make sure to seal everything with a varnish or mod podge!

Here are also the cut toe caps and some silver craft foam. The craft foam was kind of a mistake I'll get into it soon.

STEP 3: Make toe caps

Here's me making sure the placement is good.

I glued the craft foam onto the cardboard caps, and then I was thinking "well the little bit hanging over it isn't going to be a problem, nope! I'll just glue them down and it'll blend right in!"

HAHAHAHA. WRONG.

STEP 3.1: Fuck up the toe caps because you were winging this and you have no idea how crafting materials work you idiot

GROSS. DISGUSTING. VILE.

The hot glue melted the craft foam and now it's got this weird melty edge all around it that's all goopy and shit. Anyway you dont want your boots to look fucked up, you want them to look smooth like polished steel, or whatever they were made of in the show.

STEP 3.2: Fix toe caps

Everything can be fixed with Model Magic and acrylic paint! (and seal your paint with a sealant again!)

I just took some model magic (a type of lightweight air dry clay from Crayola, the cheapest you can get. Other more legit craft supply brands make similar materials as well), and squished it into the ugly bits, making a mostly seemless transition from craft foam to clay to sole.

TIP: to make model magic smooth before sanding, dab your fingers in some water to smooth it out! This also works for Paperclay as well if you decide to use a more higher end type of air dry clay.

STEP 4: Make the back metal thing that goes around the heel

So I did this kinda in tandem with the toe caps which is why the pics will look a little out of order but essentially, I took the parts of the cardboard that I cut off, and I cut them in half, put some other cardboard in between, and then sandwiched the thing in metallic craft foam.

This time it was a bit more successful because I was able to hide the weird gross melted edges on the inside. Also paint that shit silver!

Now you can glue the "heel caps(?)" directly to your boots, but I decided to use stick-on velcro instead so they're kinda removable, and may be easier to transport or clean or something? ehhh.

STEP 5: Make those handle things

So I also hit a bit of a snag with these. I ordered EVA foam dowels with a semi-circle cross-section as well as a triangular one, but I quickly realized they would be too flimsy sticking out like that unless I put something hard in between them.

So this isn't pictured, but I got some thin crafting wire from Dollarama and just bent them into L shapes, and glued the smaller dowels around them. I also shoved them into the bigger down and glued it down.

You can also see from these pictures that that leaves a weird gap in between the smaller dowels. Again I just used model magic to cover them up. There's probably a better solution but this was the one I went with.

I also lengthened the top "handle" part eventually because it looks better that way. (Please ignore the mess on my desk >_<)

Then I just paint them silver like everything else!

COMPLETE!

The nut and bolts are actual nuts and bolts. Since the base was just craft foam and cardboard, you can poke a hole in them easily and insert the bolt.

Hope you found this helpful! Or are just willing to indulge me and my notes on my silly crafting journey!

[we-are-the-dury]

Lake // 5 30 2021 they/he // ig + patreon: mckellsen

[sioxanne]

A Good Man and I Atticus | Tulip

[cafulur]

pls don’t cringe at me too hard also i know i’m late to the party but 🥺 this show is *chef’s kiss* 👌✨

[nexuspudge]

Whoops I tripped and fell into a Ryan Akagi cosplay

[redvelvetcosplay]

The first episode of Infinity Train: Book 3 is officially out to watch NOW for free on HBO Max! ♾🚂

Tomorrow, more episodes will be released!

Who else here is an Infinity Train fan? 😄

♾🚂 Tulip Olsen is me (Red Velvet Cosplay), Cosplay made by veveisme and me, One-One made by veveisme, Photography by veveisme ♾🚂

[i-swear-im-a-human]

Ok, so I have been looking everywhere for one of the jumpsuits from Infinity Train, and I cannot find it anywhere! It’s not like there’s no demand?! I mean who would want to be anything else when they can look like this!!