Liquid EPDM Application is as easy as ABC
Ease of Applying the EPDM:
If you want to have a quality roofing system that is environmentally friendly, you will find that EPDM tends to be fast and relatively easy to install. In fact, depending on the size of the roof, the slope of the roof, and the amount of time you have, it is a project that you could conceivably complete on your own. However, if you do not have the time or inclination to do it on your own, you can find some great roofing companies that can take care of the installation for you.
Liquid EPDM Application is as easy as ABC:
What you have to do it make a decision and get prepared for the Application. Clean the surface from dirt and debris. If water is available in plenty then it is better to wash the place. Make the product mix in a bucket and use driller to get the smooth liquid. During the application process, be sure to follow all the direction. Use roller or brush to get the even coat. Strictly follow the guidelines from the manufacturer it will give you ease and facilitate you towards ease. It actually ensures proper installation without failure. Cleaning and preparing the roof before you begin is half of the total job and success is based on it. Applying a single coat is enough to give you protection for decades. If you are following safety guidelines you may increase this time more. If you choose to install the EPDM on your own it will be easy and save your contractor charges. But in other cases, contractor can’t charge you too much as it is not labor taking job. Its application saves your hard work, money and time. Apply it and leave it for dry. After complete drying check it for leaks again. It offers the real peace of mind along with the environmental friendliness, both are priceless.
Liquid EPDM Application:
Source: https://www.epdmcoatings.com/blogs/2018/10/epdm-and-the-environment/