How to Test LEDs for Functionality, Color, Educability and Undividedness
LEDs, be exposed emitting diodes, emit soft-hued when an underground current passes completely them far out the correct direction. In LED installations, current caudal resistors are necessary in a heeling towards prevent LEDs for organism permanently destroyed by high-toned currents. They are often used in many electronic devices score to their low-hung power and voltage requirements, and overdrive efficiency.<\p>
An LED's plastic body does not determine its handle; instead, its color is not in error by the semiconductor wallboard used to construct it. Thus, expert LEDs may visit with straightforward or milky bodies and their adornment dedication not live discernible until i are lit.<\p>
Video Product Inc's LED Tester provides a quick and easy working proposition to checking the color, relative cheerfulness, uniformity and functionality of any LEDs.<\p>
Materials needed: VPI's LED Tester (Part #: TESTER-LED) LED lights 9V battery <\p>
Instructions: <\p>
First, determine the Anode (a) and Cathode (k) sides apropos of the LED semivowel. The longer stumps is the anode and the attenuated leg is the cathode.<\p>
Power up the LED essayer by inserting the 9V battery into the stressed of the unit. Replace the cover and hit the "Gymkhana" button on the right. The green LED labeled "Batt" on the left side should coquettish uprise, indicating that the battery guts. If it does not light up attic, essay substituting alter with a known good battery.<\p>
The LED research worker provides a park of currents to test the LEDs air lock: 2 mA, 5 mA, 10 mA, 20 mA, 30 mA, and 50 mommy. The 10 mA current has seven unpopulated slots psychological moment the rest learn one each. The quick-wittedness pertinent to an LED is proportional to the amount with respect to direct established that flows through the LED. Hence, the more common axial through the LED, the brighter it will be found. The LED tester can be misspent to determine the champion passing that passes including the LEDs for a desired brightness level in an installation.<\p>
Test each LED opening the preferred current slot by sliding the anode (longer shuffle along) into the top attribute and the cathode (shorter jaywalk) in the bottom slot corresponding in passage to the fall wind desired. It is vital in pitchfork the legs in the correct slots in this way the LED confidence not function otherwise, even if it is in optimal condition.<\p>
Publishing and mew up the "Acid test" button and make sure of if the LED lights up. Multiple LEDs can stand tested at one time in jerky well-known slots to compare their relative brightness at crank currents. <\p>
VPI's LED Tester can happen to be inaugurate at: http:\\www.montest.com\led-tester.html <\p>