#post shore

[tianjinwellmadescaffold]

Post Shore Manufacturing Video - Inner Tube of Telescopic Steel Props - ...

[scaffolding1996-blog]

Safety Tools Lanyard & Belt Set

The scaffold belt is the mark of a tradesman, a hard-working person who knows how to get the job done. Using a tool belt and scaffolding safety harness correctly will help ensure your safety while you work. As an active worker you need to have your tools handy and in order. Carrying your tools on a belt allows you to keep your hands free for your tasks. Tool belts are commonly used in a great variety of occupations including; electricians, carpenters, steelworkers, plumbers and construction workers among many others. Even if you don't use one at work, chances are you use a tool belt for your home maintenance and renovation work.

It is important to secure tools and to guard sharp edges. A falling tool is subject to damage, and can also cause injuries to your feet, or to workers on a level below you. A sharp tool such as a knife or chisel can stab you if it is carried unsafely. You must choose the right tool belt assembly to keep your implements safe and secure. Pockets, pouches and slots should be of the correct size and shape to keep your tools from falling out. The belt should be made of a sturdy material, reinforced for the points of tools. Fasteners should be effective and resistant to wear. Sharp tools such as knives, saws, hatchets, axes and other cutting or chopping tools must be guarded by scabbards or sheaths to prevent injury and tool damage. Tool belts must never be used as safety belts for working at heights. Other safety products are neccessary for the scaffolders: Safety harness and lanyard, Scaffold Lanyard for tools. Tools lanyard is Queen Group improve and developed. At first we found that scaffolding workers use the bi-hex spanners ,ratchet wrench , hammer usually dropped from high scaffolding . but if Scaffolders tie a rope to the tools ,they decline the work efficiency . also they use the rope not strong , when the spanner and hammer drop down, the rope will break. So we design the new type tools lanyard , use high technology material, so the tools drop ,but the rope will be a buffer,  So the buffer tools lanyard reduced the accident of scaffolding tools dropped. Our tools lanyard test by falling experiment. So make sure the quality is good. The leather belt we made suitable for spring level ,scaffolding hammer, spanners , ratchet wrench,tape.The tool belt we use high quality head skin, and strong. Long time life of use is our leather belt.we made the tools lanyard and tools belt adhering to the spirit of the craftsman,we are strictly on ever details.  Safety tools lanyard and belt warmly welcome by the people who have over head work. Improvement of work efficiency is our goal.

[scaffolding1996-blog]

Scaffolding Spanners & Hammer

Queen Group is one of  the first scaffolding hammer & Spaner suppliers in China. A scaffold spanner usually has a box-shaped or 'socket' head on one (single-ended) or both ends (double-ended) of the shaft (or handle). The term 'scaffold spanner' is also used to refer to podgers, usually with ratcheted ring heads. Scaffold spanners often use a 12-point (bi-hex) profile which can reduce the space that is needed to turn the fastener because it provides more possible positions for the spanner to fit onto the head of the fastener. The length of most scaffold spanners is between 200mm and 300mm (8-12").

Scaffold spanner head pivots around joint so it is flexible.  The socket heads of scaffold spanners are flexible, which is useful in obstructed spaces. Some have a double head on one end which spins within a stirrup. Titanium is a stronger, lighter metal than steel so is great for scaffold spanners which need to be used all day.  Most scaffold spanner heads are made from steel but some are made from titanium, a much harder, lighter metal. It is more expensive than steel but well worth the investment if you are erecting scaffolding every day. Types of handle Users of scaffolding spanners use them all day, every day.  Handles are one of the main differences between scaffold spanner designs. Because they are designed to be used every day, all day, by the user, each person has a preference for handle shape and a range has been developed. The largest width of the handle is usually given in the product description. Scaffold spanner with round cylindrical spanner.  Round Round handles are cylindrical with a diameter of 14 or 16mm. They can be knurled (see below) or smooth. Flat sided scaffold spanner handle is easier to use.  Flat handles are made of a cylindrical base with two parallel flat sides that have been ground away from the handle. The flat sides can help with keeping the user's hand in an optimal position while using the spanner. Scaffold spanner with a knurled cross hatched etched handle.  Knurled handles have a cross-hatch of lines etched into them. This improves the user's grip on the handle. Scaffold spanner with a poker handle which has a bulge to fit into the palm of your hand.  Poker handles are cylindrical handles that bulge in the middle, taper towards the end and have a knob on the end. This is quite a comfortable handle to use as the bulge fits in the palm of the hand and the knob prevents the hand slipping off the end of the tool. On the other hand, the bulge makes the handle thicker so it is less likely to fit into a confined space. Scaffold spanner with a stepped handle for better reach.  Stepped handles have a thinner section near the head and a thicker section where the user grips the tool. The thinner section allows more movement of the spanner so it is better able to turn fasteners in tight spaces. Scaffolding spannes, scaffolding racthet wrenches , tools lanyard , scaffold podger hammer , claw hammer , opened jaw podger sappnner , regger’s podger,Gin block , tape measure , toggle tie ,we have all kinds different production about scaffolding tools , we can provide you the whole system scaffolding tools for your choice. Our scaffolding tools have our own design and easy to use , the tools life of using is longer than other factory made . we also use expensive material like Ti-spanner, Aluminum spanners , and some high-tech materials also use in tools lanyard. 

[scaffolding1996-blog]

Formwork Accessories

Queen Group, as the scaffolding & formwork accessories suppliers manufactures various kinds of scaffolding accessories and scaffolding formwork accessories.  mainly include forged washer plate, tensioner clamps, guardrail hooks, fence, screw sleeve, handle sleeve nut, scaffolding wheels and so on. There are multiple ways to reach any area, and each may involve varying degrees of safety and risk. That's why a critical part of every rental consultation is a comprehensive review by a trained Rolls Scaffold representative of the scaffolding accessories needed to complete the project safely. 

Features 1. Good quality,best service 2. Experienced technical support. 3. Good quality and easy installation. 4. Standard package and timely delivery Scaffold Formwork Forged Tie Rod Wing Nut Product Specifications 1. Material: Ductile Cast Iron or Forged Steel  2. Size: 17mm 15mm 12mm or as you need 3. Name: wing nut 4. Surface treatment: Natural or Galvanized  5. Standard: EN74 6. Main market: America, Europe, Australia Africa, Asia and mideast 7. Quality: Durable, stable, skid-proof, antirust, easy to assemble & dismantle 8. Packaging: Woven bags with pallets or as your requirements 9. OEM service is available 10. Colour:  Natural color or White or Yellow

[scaffolding1996-blog]

Guard Rail Post & Barrier

The Guard Rail Posts are also known as tube clamps, pipe clamps and scaffold clamps. The Guard Rail Posts, tube clamps, pipe clamps and scaffold clamps can be used for a variety of applications in industrial, commercial and domestic markets. The Guard Rail Posts, tube clamps, pipe clamps and scaffold clamps when used with hand rail tube can be assembled to go around machinery, storage tanks, deep pits, water reservoirs, pools, shopping trolley stations, sports pitches, animal pens and at the side of roads and railway lines. Key clamp and tube clamps can be used to make racking for storing tyres, wheels, food stuffs, and many other products. Key clamp and pipe clamps with hand rail tube can be used to hang garments and retail outlets are now using them for contemporary retail garment displays. One of the main uses of key clamp and pipe clamps are to build hand rails on steep inclines and steps. These can be seen at the sides of railway tracks, motorways and in and around our towns and cities. Key clamp hand rail size 34mm has become popular to aid the elderly to get into their homes from the garden and roadside.

A safety barrier is a component which prevents passage into a dangerous area. It is commonly used to mitigate risk in the Hazard-Barrier-Target model, as studied in safety science.  Physically separate the work area and the traveled way are designed to resist penetration of an out-of control vehicle, and have properties which redirect an out-of-control vehicle back on to the road away from the work area. Components Hard barriers are fixed into the ground as a bollard or gate, removable on stands, or clipped to a structure. Regardless of the barrier type, the components and overall assembly will be similar. The material of rails used to stop the flow of objects into the protected area must be durable and strong enough to withstand any impacts related to the environment in which it is installed; for example, a guard rail on the side of the road must be able to contain and safely stop or drastically slow down a vehicle weighing up to 40 tons (cable barriers are most effective against tractor trailers), whereas a pedestrian safety barrier only needs to be tall enough, designed with a lattice effect to keep people from climbing through it, or highly visible when being used to display caution. Applications Safety barriers vary depending on their application. In an industrial setting, a safety barrier may be a fence or window, designed to keep the operator away from moving parts or other hazards. Railings should be closed cornered with rounded or flared edges to prevent any further damage to personnel or machinery in the event of a collision. Safety barriers can also be used to protect the corners of fixtures, support columns, exposed pipes or cables, or designated areas on the work floor. In an automotive setting, the barrier may be a traffic barrier or Jersey barrier, separating lanes/directions of traffic flow. In crowd control, terraces use crush barriers to reduce the risk of human crush in large crowds. Safety guard rail post &barrier for construction of Queen made is your safe guard. Safety guard rail usually used in highway road ,express highway road, construction working , garden working,building working and so on .It owns two kinds of tubes :Round Steel Tube & Square Steel Tube Material : Q235 ,Q255,Q345 Surface: powder coated ; painting ;Zinc Plated /Galvanized ;Hot Dip Galvanizde Colors :Reb ;Yellow;Bule ;Pink; and so on . We mainly exporting safety scaffolding guard rail&barrier to Europe Countries ,such as : Spain , Italia,France,German, Finland and so on. Our Advantages : * High quality is promised under strictly inspection.  * Reasonable and commerial price is provided to get win-win cooperation.  * OEM service and customized design service is available.  *We are professional scaffolding manufacture  which saves a lot of transportation fee and time.  * Good service. And any inquiries will get response within 24h Safety is Life of Scaffolding Manufacturer, linyi queen Scaffolding guard rail , Controls Scaffolding Quality By Strict Management System and Own Independent  Testing Throughout Full Production Processes.

[scaffolding1996-blog]

Screw Jack Base

Scaffolding Adjustable Base Jack is used as the base which holds the standard or the formwork of the scaffold, adjusting the height of the scaffold as well as making the whole scaffolding more stable. Queen can offer three types of Scaffolding Jacks: Scaffold Levelling Jacks, Caster Jacks, and Swivel Jacks. If you're working on an uneven surface, or you just need to fine tune your tower's height, we've got the jack you need.

Scaffold Levelling Jacks

Solid-steel threaded rod welded to the base plate at a right angle. Allows for individual adjustment of each leg in a stationary position on relatively level surfaces. finished galvanized. Or HDG

Caster Jack

Solid-steel threaded rod welded to a female receiver that accepts either our scaffolding caster wheels or our base plates. Allows for individual adjustment of each leg in conjunction with a scaffolding caster wheel allowing your scaffold to roll on uneven surfaces. Can additionally be converted to a level jack when used with a base plate in place of the caster wheel.  finished galvanized. Or HDG

Swivel Jacks

Solid-steel threaded rod welded to a huge T. Receiver welded to base plate accept the T on the end of the threaded rod, allowing base plate to swivel. Allows for individual adjustment of each leg and on surfaces with too high a degree of incline for a level jack.  finished galvanized Or HDG

Scaffolding screw Jack base /pipe screw jack base /U-head screw Jack/head jacks/ Scaffolding leveling jack, made in Queen Group is 100% proof tested for complete safety. And we strictly control the quality of every piece of the screw jack, according to the standard: EN74, IS09001: 2000, BS1139. Reliable performance and Corrosion resistance of queen screw jack praised by customers.  Base plates in various lengths are available to compensate uneven scaffolding foundations. The base plates thread is cold formed and rounded to allow the wing nut to be quickly screwed up or down, while also making cleaning easier. It is important to note the 25% of the base plates length or at least 15 cm should always be in the scaffold standard. Head jacks are used to support the timber or steel beams on top of scaffolds, also the thread is cold formed which can supply high loading capacity. adjustable scaffolding hollow jack base, Jack base is used with all scaffold systems and formwork systems. Selling points of scaffolding screw base jack queen made: 1. The scaffolding base jack is made up of seamless screw pipe, Q235 steel nut, and c20 plate. 2. Our base jack is compatible with all type of scaffolding, easy to connect scaffolding horizontals. 3. Made from Q235 mild steel, the adjustable base jack can bear more than 100KN. 4. Screw base jack can make the scaffolding standards stable on uneven ground. 5. With high durability and strength, scaffolding jack base provides stable support for large heavy structures such as stage, tunnel, bridge, and subways. 6. Unique sleeve nut can not only adjust the height of jack base but more importantly, fasten the scaffolding tube. 7. We can design according to customers' requirements, OEM and drawing design offered.