#powerdyne

[frnklist]

Powerdyne Y3 Skate Tool // Nerd Roller Skates ($25 CAD)

[aseahorseandaduck]

Moxi skates + Suregrip Avenger Magnesium OR Riedell 495 + Powerdyne Rival

I know I want both combos but I can’t chose which I want first! Uggghhh

[cash-rich]

Powerdyne CEO speaks to News 10

Powerdyne CEO speaks to News 10

Hirson stated the sludge-to-diesel process, which is a three step process, will use plasma gasification, which will heat waste to 4000 degrees Celsius. Hirson stated the plant will have no emissions due to gasification of organic matter that is a …

View On WordPress

[langley88]

I got new skates.

[derbygearadvice]

I am buying Powerdyne Reactor plates. They are for Bont Vaypors. I got my feet molded so I don't know the Bont size but my feet are a R3 UK7 (US8). Will a size 7 plate fit on my new Bonts? Moreover, as the Bont's will take so long to come, I am having to buy a boot in the meantime as I can no longer wear my R3's. What boot would you recommend for up to £150-200, one that will be relatively easy to sell on in 4-6 months when the Bonts arrive, and will it be ok to remount my dyne's to the Bonts?

For your plate question, please look at my two plate pages here for more information. You don’t choose a plate based on plate and boot size.

As for a boot, it depends entirely on your foot shape, but if it’s only for a few months why not just find a cheap used boot that you can sell to fresh meat afterwards?

[flustercluck338]

Powerdyne Arius, part the Second

Ok, I have about 4 hours on these so far. Tried them out at the local rink, Lloyd's Recreation last Wednesday. I was very surprised by the weight of them. They are VERY light. First impressions were that I had to push very hard to get them to do anything, but they seemed very precise. Weird, but ANY movement when I first put them on the floor resulted in a change in direction. I'm sure this is due to the direct connection the plate has with the trucks. It took a few laps to find my balance point to allow me to glide straight, once I had that figured out, I decided to get some speed. 

They felt very odd at first, the faster I went, the more they would wobble, but they were very easy to adjust to that wobble. It eventually went away and I tried to get them to turn. Turning sharp required so much effort that I needed to take them off after 15 minutes of skating. My feet hurt that much. I had installed the softest butterfly cushions included in the box. The light blue ones. Hmm. Some fix would be required if I were to skate these for real.

Lacing on my derby skates I returned to the floor. Wow. My short forward Advantage plates with all yellow SG supers on full loose felt sluggish and slow to react.

I performed some modifications to the yellow butterfly cushions and installed them.

I skated about 2 hours at a derby practice on Monday night. Huge difference in how they act now. VERY easy to turn, yet very stable. Nearly no foot pain. Very nimble. I was pleasantly surprised by how much I liked them. They skate like a very precise DA45. Every tiny movement you make is immediately noticeable.  It was mentioned to me that the power transfer on these is better than a conventional plate. I will say that they definitely feel more solid than a conventional plate. Skating laps was very easy and energy did not feel wasted at all.

I let another skater try them and the first thing she mentioned was the weight. What do they weigh exactly? Derby ready?

This is very light for a derby ready skate. The boots pictured are a size 7. The wheels pictured are Roll Line Heliums. I don't normally run a narrow wheel, but I wanted my Bont/Advantage combo ready to skate if these weren't working for me. The Arius uses 8mm bearings, my Advantage use 7mm. 

Yes, they are very far forward. I like them like that.

The toe stops I had on did not work very well. The toe stop boss is nearly vertical and does not allow a standard toe stop to work where I like it, Up at the very top. You can see the angle here is no good for toe stop running. This issue was rectified by installing a set of the Bionic toe stops with the angle on them. They are about 35 gr. heavier than the toe stops pictured. Not a deal breaker. 

I really like this plate. I do not like the lack of adjustability with the cushions and action. I will need to work on it some more to get them exactly right for me. I will likely go stiffer or la bit less action in the front. I have yet to try my Aussie Scotts on these but I will put them on eventually. 

Very impressed so far. Worth $400+? I don't know yet. 

[flustercluck338]

Powerdyne Arius

I first saw this plate in Armstrong, British Columbia. It was being worn by a skater named Blow-Bye. Her boyfriend, Dan Miller had designed and made it. I was intrigued by the design and saw it again in April of 2012 being worn by Quadzilla, at Flat Track Fever, a tournament my league hosts yearly. Production models were released this summer, and I saw a few skaters on them at Rollercon.

I got my pair last week. From my favourite skate shop, Nerd Skates.

Awesome packaging. A bit fancy. They did supply all the required tools to service the plates, which is good. A couple allen keys is all that is needed.

Axis pin (the big guy). This attaches the truck to the plate 

Axis pin sleeves (the two wide black bits with the holes). These are bushings to allow the truck to swing freely

Butterfly cushion (the green bit) 

Stabilization pins (the little screws).These lock the butterfly cushion in place.

The plate is manufactured out of 6000 series aluminum. The prototypes were 7000 series. There have been some minor design changes which likely allowed the use of the more cost effective alloy.

They are light. I haven't weighed them, but I will. 

These ones are a size 5. 6" wheelbase. They will be mounted all the way forward on my old converted ice speed boots. 

[derbygearadvice]

I was looking at the complete skate sets of the Wicked or the Antic AR1. I then read some forums saying that it is best to get custom skates as it is better value. So I was looking at the avenger or the DA45 plates as they had quite good reviews. How do they compare to the PowerDyne Rival Aluminum plates on the wickeds? I am quite new to derby and would prefer a light plate that is easy to turn for transitions etc. as I have fairly weak ankles. Can you put any boot on any plate?

You are correct that building your own skate is a much better arrangement than a package.

The Avenger, which is a DA45 plate, is worlds above the Rival as it is strong, turns well, and is very light.Other DA45 plates are great, too, but most aren’t nearly as light as an Avenger.

Your weak ankles won’t last long in derby, so I wouldn’t be too concerned there. You should start ankle workouts to strengthen them up, as if you don’t you are risking broken bones.

Lastly, you can put any boot on any plate.

Let me know if you need anything else!