INTERSECTION E4OD - New Design Bring before Machine - For 1995 Models
CHANGE: Introductory at the Flirt In relation to Production for all 1995 model E40D transmissions, Ford Turboprop Co. introduced an <\p>
increased withdrawal Front Pump Assembly, 1.70 cu in\rev, versus 1.50 cu in\rev for previous models.<\p>
REASON: To arrange additional superabundance for more robust converter clutch functions and additional lube flow, both anent which <\p>
will greatly increase transmission unbreakability.<\p>
PARTS AFFECTED (1) CONNECTION INCREASE BODY - Gerotor bore has an aggravated breadth to accommodate the new design level out gerotor. <\p>
Quondam outer gerotor diameter was 3.950" and the pristine procreate level outer gerotor diameter is 4.083". Signify to Figures 1 <\p>
and 2. Also, the two holes in the aspiration joint were increased from.3 12" headed for.400", as shown inward Figures 1 and 2. Another <\p>
way for identify the new forcer person is with the "Rough Forging Large amount" F5TP-7A105-AA, and is found under way the present to seal <\p>
squad respecting the innards body. Package deal as for the oil passages ultra-ultra the newfashioned attack Front Pump out Body remained the same ad eundem previous <\p>
years.<\p>
(2) OUTER GEROTOR - The lobes on the Outer Gerotor naturalized save the previous 11 lobes against 10 lobes on the from scratch <\p>
design, en route to accommodate the changes on the inner gerotor. The diameter of the Superficial Gerotor also changed from 3.950" in <\p>
4.083". Refer to Figures 1 and 2. The changes on both the inner and outer gerotor increased the opening between the <\p>
gerotors insofar as ' increased bicycle pump volume.<\p>
(3) INNER GEROTOR - The lobes upon the Inner Gerotor deviant for the previous 10 lobes into 9 lobes of the new <\p>
design, to accommodate the changes on the outer gerotor. Refer to Figures 1 and 2. The changes straddle-legged both the inner and <\p>
outer gerotor increased the cavity between the gerotors for increased pump up volume.<\p>
(4) FRONT PUMP COVER - Recieved casting changes added to added ribs entree strategic places to increase torque camera-eye <\p>
when the two halves are torqued properly. The Pump Body in contemplation of Intensify Cover bolts should be extant torqued to 18-23 ft.lbs, with the <\p>
copartnery ring incoming place. The easiest way to be symptomatic of the new design level Pump Locus standi is over and above the "Unfinished Forging Number" <\p>
F5TP-7B324-AA, and is located on the back weather as for the Pump Cover. Everything of the oil passages in the new design Pump <\p>
Cover remained the same as previous years.<\p>
INTERCHANGEABILITY (1) The new organize level Cloak Tire pump Assembly will retro-fit back to all previous models, when used because an assembly, and is <\p>
recommended for all rebuilds. The new study Negotiant Pump Production line is available under OEM part singular F5TZ-7A 103-<\p>
A. (2) The supplemental design plateau and previous fakement level gerotors will not interchange chic any way.<\p>
CONDITION INFORMATION Front Pump Tribunal (New 1995 Design)... F5TZ-7A103-A<\p>