#push-button switches

[cnfiln]

What is the emergency stop push button？

The description of the 22mm waterproof Filn metal emergency stop push button.

The mounting hole size of the product is 22mm, and we can produce the product, which size is 16mm and 19mm, etc.

We can produce the product with the function of 1NO1NC, or with the function of 2NO2NC. 1NO1NC product has 3 pins, it controls single road, 2NO2NC product is dual-way controlled.

The head material of the product is zinc alloy, which can be oxidized into a variety of colors, the most conventional color is red. The head size can be produced according to customer’s size requirements.

The rated current of the product is 5A 250V AC, the service life is 100,000 times, it can be used on the motor, which power is 1000W.

What is the emergency stop push button?

The industry called the product “emergency stop push button” for short. When an emergency occurs, one can achieve protection by quickly pressing this button. The striking red push button switch can be seen on many automation devices, with the red fonts, which has the same meaning as “emergency stop”. This push button is collectively known as an emergency stop button. This button is just pressed down directly. You can quickly let the whole device stop or release some transmission parts immediately. To start the device again, you must rotate the button, which is only released after rotating clockwise for about 45° and the machine can be energized. In the industrial safety, in the case of abnormal circumstance, referring to some transmission parts, which will directly or indirectly cause damage to the human body must be with protected measures, the emergency stop button is one of them. Therefore, the emergency stop button must be added when designing some machines with transmission parts. Meanwhile, it should be installed on the machine surface, it is convenient operation for workers and without any blocks. How to wire the emergency stop push button ?

The product has 4 wiring ways.

The wiring way 1 Light: Not working,   Switch: Opened When you press the button, light is working, switch is closed.

The wiring 2 Light: Working,   Switch: Opened When you press the button, light is working, switch is closed.

The wiring 3 Light: Working,   Switch: Closed When you press the button, light is not working, switch is opened.

Light: working,   Switch:closed When you press the button ,light: working ,switch:opened

Where to buy the emergency stop push button ?

If your time is urgent, you can place an order at www.cnfiln.com, we will arrange the delivery at the same day, or you can purchase the product through the email communication offline. The weight of per product is about 0.05KG, we will choose the delivery way according to customer’s purchase quantity. The quantity of per box is 20 pieces, and one box has 500 pieces. The product has no MOQ, we can supply samples free of charge for your test.

The product of Filn had passed the certifications of CE, ROSH, ISO90001, and also has an professional push button laboratory, which can ensure the product’s quality.

Except the push button switch, Filn also produce supporting indicators, rocker switches, etc., if you want to custom the push button switch or indicator light, you can contact us immediately, we will give you a satisfactory solution within 24 hours.

If you are interested in our products or want to purchase them, or need the samples, please contact us directly, our email address is [email protected],cn.

[cnfiln]

What does the 2 pins push-button switch mean?

The description of the 16mm 250V 10A momentary doorbell 2 pins push-button switch.

The advantages of the product are high current, cheap price, waterproof. Here is the detailed introduction.

The mounting hole diameter of the product is 16mm, the installation way is screw thread. You just need to tighten it on the push-button panel, which has a waterproof function.

The waterproof rating of the product is IP65, we can also custom produce IP67 waterproof rating if you need it.

The rating current of the product is 10A, it can be used on mechanical equipment which power is below 1000W.

The material of the product is divided into nickel-plated brass, stainless steel, and aluminum alloy. The aluminum alloy material can oxidize various colors, such as red, green, yellow, blue, black, etc, which appearance is very beautiful and atmospheric.

The head type of the product is divided into high head, round head, and flat head.

The metal part of the product has three types of materials, as follows.

The product with stainless steel adopts the 304 stainless steel, it contains nickel material, so it has a corruption resistance function, which is suitable for outdoor and seaside use.

The product with copper-plated nickel has the advantage that the appearance is atmospheric and beautiful after plating treatment. It is usually used in the testing equipment and automatic equipment, the price is much more affordable than the other two types.

The metal appearance of the zinc alloy product can be plated into various colors, such as red, green, blue, black, etc. After plating, the whole product appearance is with color, which is very beautiful.

The base plastic materials of the product are PC and PA66, its temperature resistance is 160 degrees and its usage temperature is between minus 40 degrees and 80 degrees.

The product has a normally open reset function, its contact point is a silver point, which size is 3mm, and its current can be up to 10A.

The internal design of the product has waterproof circles, and its waterproof rating is IP65, it can be used indoors.

The mechanical life of the product is 500,000 times and its service life is 100,000 times.

How does the 2 pins push-button switch work?

The 2 pins push-button switch has two functions of self-locking and self-reset.

The 2 pins push-button switch with self-locking means that press down the key, it does not return automatically, press the key again, it will return to the original position.

The 2 pins push-button switch with self-reset means that press down the key then release your hand, the key will return to the original position automatically.

How to wire the 2 pins push-button switch？ The product’s one pins is connected to the power, then connect from the other pins. With a press, the current conduct electricity through the access board inside the push-button.

Where does the 2 pins push-button switch use?

The product’s application is very wide, especially above the access control, and automation equipment, etc.

Where to buy the 2 pins push-button switch？

If you are interested in our products or have special requirements, you can send an inquiry to our email address [email protected]. We will arrange for a professional salesman to contact you and give you the best price and service.

Your quantity is small, you can place an order directly at www.cnfiln.com, we will arrange the delivery on the same day.

How to ensure the quality of the push-button electrical switch?

The 2 pins push-button switch of Filn had passed the certifications of UL, CE, ROSH, ISO90001, it also has a professional push-button switch testing laboratory, which can ensure the switch’s quality.

Filn has 11 years of experience in push-button producing and a professional R&D technology team.

[cnfiln]

What is the push button switch with LED

What is the push button switch with LED?

When the machine device is powered up, press the button switch on the control panel and it lights up. Operating hard with fingers, it is composed of a simple electric mechanism of air switch mechanism to turn on or off the appliance. The current allowed for the push button switch contact is very small and generally not more than 5A. Therefore, under normal circumstances, it does not directly control circuit of the main circuit, but control the circuit to send command signals, control contactor, relay, and then control the main circuit switches, functional conversion of electrical interlock.

How does the push button switch whit LED work?

The product has two types of self reset and self lock. Self-locking means pressing down the key does not return automatically and press it again to return. Self-recovery is that after the key finger is pressed down, when the hand is released, the button returns automatically.

How to connect the wire with the 12v push button switch with LED ?

The biggest difference between a push button switch with LED and a switch without lights is that the customer can judge the device operation with the button lighting. The corresponding relationship between the button light on and the operation of the equipment will also have different effects because of different wiring methods.

The following is the corresponding connection diagram between the light lighting of the push button and the equipment operation of the 1NO1NC push button under different connection modes.

In the static state, the light of the push button switch with LED is out and the device is not operating. Press the push button switch, the light of the product is on and the device starts to operate.

In the static state, the light of the push button switch with LED is on and the device starts to operate. Press the push button switch, the light of the product is out and the device stop operating.

In the static state, the device is not operating. Press the push button switch, the light of the product is on and the device starts to operate.

Where to buy the push button switch with LED ?

Per box of the product is 50 pieces, and per box weight is 2 kg. The international delivery will need 3 days. Here are two purchase ways.

If your purchase volume is small or your time is urgent, you can place order at www.cnfiln.com or Speedway. We will arrange the delivery at the same day.

Your purchase volume is large or you need to customize the push button switch, you can email us at [email protected], we will give you a satisfactory solution.

Where does the push button switch with LED used?

The product has a wide range of applications, including calculators, push button phones, and home appliances. They are to be found in home, offices and industrial applications. They can turn the machine on or off, or let the device perform specific operations, just like a calculator. In some cases, especially in commercial and industrial applications, the push buttons can be mechanically connected, press one button can actually release another.

Filn has a professional push button R&D team that can customize a variety of products according to customer’s demand in a very short period.

In addition to producing push button switches, Filn also produces indicator lights, rocker switches, micro-switches, etc. Please contact us immediately at [email protected] if you have any questions.

[cnfiln]

What is the marine push button switch?

The description of the 19mm waterproof IP67 12V red marine push button switch.

The mounting hole size of the product is 19mm, and the installation style is screw thread. You just need to open the hole of the size 19.2mm on the panel, then put the waterproof IP67 12V red marine push button switch in the installation hole. Put on the 19mm silicone waterproof ring and then screw the 19mm copper cap. It can be fixed and also be waterproof.

The marine push-button switch has a variety of voltages, such as 2V, 12V, 24V, 110V, 120V, 220V, 380V, etc., We can customize different voltages according to customer’s demand.

The metal shell material of the product is divided into zinc alloy, stainless steel, brass.

Stainless steel product has the corrosion-resistant function, using 316 material, which can be used in a relatively harsh environment, such as the seaside, kitchen equipment, outdoor, etc.

 The metal appearance of the brass product is beautiful after plating treatment, and the cost is relatively low, which is used indoors, such as test equipment and automation equipment.

The zinc alloy product has the advantage that the metal appearance can be plated in a variety of different colors, such as red, green, black etc. After plating, the whole push button has color, which is more personalized.

The product has a variety of colors, such as red, green, yellow, blue, white, etc., we can also produce two-color or three-color push button switch.

Switches can be divided into reset marine push button switch and marine push button switch with lock according to the function.

The bottom design of the product is epoxy resin glue filling design, and the bottom is all waterproof, which can reach the waterproof rating IP68, which is particularly suitable for places with water or humid environment.

How does the 19mm 12V marine push button switch work?

The operate mode of the product with lock is that install the push button switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. Press the button again, the machine power is shut down.

The operate mode of the reset product is that install the switch on the mechanical equipment, then connect the wire and the power is on, press the button, the machine starts. When release the push button, the push button switch is automatically reset and the machine power is off and stops working.

How to connect the wire with the 19mm 12V marine push button switch?

Install the product to the control panel and connect the 12V voltage. Press the 12V push button switch, the device starts, and the light on the push button is on. The device will turn off when pressing the switch again.

Connect the positive pole wire of the device to the switch load pin , the other load pin is connected to the LED wire of the push button switch and the positive pole of the device. Connect the negative pole of the device to the negative pole of the push button’s LED light pin. Please refer to the picture description below.

Where to buy the marine Push Button Switch ?

If you need to custom the marine push button switch CH or button connection, you can email to our push button technical engineer, who will give you a satisfactory solution, and his email address is [email protected].

Your purchase volume is relatively large, you can email our international trade sales staff who have 10 years of overseas sales experience and will give you excellent price and service, their email address is [email protected].

The product of Filn had passed the certifications of UL, CE, ROSH, ISO90001. It also has a professional push button test laboratory, which can ensure the push button’s quality. The product’s quality guarantee period  is 5 years, and Filn will replace the product for free if there is any quality issues during the warranty period.

Filn has 11 years of experience in push button production, also has a professional R&D technology team, who can customize various styles of push button switches according to your requirement.

If you have any questions about the marine push button switch, please contact us immediately. We will give you a satisfactory reply within 24 hours. Our email address is [email protected].

· 

[uspswitch]

An electrical device which is used to turn an electrical circuit on or off is called a switch. The function of switches is to turn off or start the supply of electrons from any circuit. In our homes, we get switches with the help of which we can start or stop all the appliances in our house.