How To String Align Your Wheels with QuickString from QuickTrick Alignment!
Proper wheel alignment is crucial for optimal vehicle performance, tire longevity, and safety. However, aligning your wheels at a professional shop can be costly and time-consuming. Fortunately, with the 5th Gen QuickTrick QuickString 4-Wheel Kit from QuickTrick Alignment, you can easily perform wheel alignment at home with accuracy and affordability.
In this blog post, we will guide you through string aligning your wheels using the QuickString kit, ensuring precise alignment for your vehicle.
Components of the QuickTrick QuickString 4-Wheel Kit
Before we dive into how to do a string alignment with Quick Trick string alignment kit, let's familiarize ourselves with the components included in the QuickTrick QuickString 4-Wheel Kit:
Caster/Camber Verticals: These vertical bars help you measure the caster and camber angles accurately.
Toe Bars with QuickTrick Stringer and String: The toe bars, along with the stringer and string, allow you to measure the toe angle of each tire. It is recommended to position the string as close to the edge of the tire as possible without being too long.
QuickTrick Digital Gauge: A digital gauge is a crucial tool for measuring various alignment angles, including caster, camber, toe, and thrust angle.
Gauge Attachment Brackets: These brackets attach the digital gauge securely to the toe bars.
Attachment Pins with Caps and Allen Wrench: The attachment pins connect the toe bars with the digital gauge brackets. The caps ensure a secure connection, and the Allen wrench helps tighten them.
QuickTrick Backup Bungees: The backup bungees provide additional stability by keeping the toe bars in place during the alignment process.
QuickTrick Carrying Case: This handy carrying case lets you conveniently store and transport the QuickString kit.
Alignment Process with QuickTrick QuickString
Step 1: Set up the equipment
Begin by assembling the QuickString kit according to the provided instructions. Attach the caster/camber verticals to each wheel and secure them tightly. Then, connect the toe bars to the verticals using the attachment pins and brackets. Ensure all connections are secure.
Step 2: Position the strings
Extend the strings from the toe bars and align them as close to the edge of each tire as possible without being too long. Make sure the strings are taut and parallel to the vehicle's centerline.
Step 3: Measure caster, camber, and toe
Using the QuickTrick digital gauge, measure the caster and camber angles by aligning the gauge with the corresponding verticals. Adjust the alignment as necessary to achieve the desired values. Next, measure the toe angle by observing the string's position relative to the tire at the front and rear. Adjust the tie rods until the toe angles meet the specifications provided by your vehicle manufacturer.
Step 4: Check the thrust angle
The QuickTrick QuickString 5th Gen kit allows you to check the thrust angle, which helps square your vehicle. Use the digital gauge to measure the thrust angle, ensuring it aligns with the desired specifications. Adjust the rear axle if needed to achieve proper alignment.
Step 5: Repeat for all wheels
Repeat the alignment process for all four wheels, adjusting as necessary to achieve the desired caster, camber, toe, and thrust angles.
By following these steps and using the QuickTrick QuickString 4-Wheel Kit, you can perform accurate wheel alignments at home without needing expensive equipment or professional assistance.
Regularly checking and maintaining proper wheel alignment will improve your vehicle's performance and extend the life of your tires. Consider your vehicle's manual for specific alignment specifications and recommended intervals for alignment checks. If you are a DIY car alignment enthusiast, get your QuickTrick String kit today. Check it out now!
Visit here- https://quicktrickalignment.com/product/qsb/
