Turn your empty EOS container into something useful!
Materials:
Empty and cleaned out EOS container Clay of your choice Mini USB Super Glue Modge Podge
Directions:
1, Empty and thoroughly clean out your EOS container.
2. Take a small chunk of molding clay and roll it into a ball that is about the size of a quarter.
3. Take a knife of a straight edge and cut the bottom half of the clay ball so that you have a flat bottom that will fit right on top of the EOS container.
4. Mold and shape the clay into what looks like the top of a real EOS balm.
5. Take your mini USB and lightly press it into the middle of the clay without fully pressing it in all the way.
6. Take a knife or something sharp and create the USB slot.
7. Remove the clay from the EOS container and bake it so that it is firm.
8. When your clay has been baked, put some super glue on the EOS container and then set your clay onto the EOS
9. Put some super glue into the USB slot and then place your mini USB into the slot.
10. Put some Modge Podge on the clay to give it that EOS balm effect.