Another first here: The “HildaHex” After some long discussions with Stefan over several months and many back and forth revisions, I am proud to introduce the "HildaHex". it’s the third in my “Hilda” line which includes the Hildabeast and Hildagard as well. I want to thank Stefan, and Jubal for the much appreciated help and great ideas which have became the final product you see here. Testing on my part has already began and there will be much more but I must say my first impressions after a conservative maiden today are that this is a very nice flying hexacopter. It is much more conservative on battery usage than I expected and had a 5 1/2 minute maiden on a 3300mah 6s lipo (which is a very used pack not new) and landed with an average cell reading of 3.69v. A price is TBD so please do not ask yet but we will have one very soon. Component list for this prototype is as follows. Matek 722 std flight controller APD PDB500 (with two taps doubled up on for the hex configuration APD confirms no problem). After talks with APD a dedicated hex PDB has been in the works and is almost complete but a release date has been set. DYS Aria 70a esc's Brother Hobby 3115-1050kv motors TBS unify pro vtx TBS micro V2 rx Foxeer fpv cam Graupner 9x5 props (will also accommodate 10" props.) AXII long antenna Prints from Willy at 3dmatisse.com #standinquaddesigns #fpv #fpvfreestyle #fpvracing #fpvdrone #fpvracer #fpvaddiction #fpvaddict #fpvlife #fpvflying #hexacopter #hex #teamblacksheep @graupner_official @brotherhobby @blacksheepfpv @gopro @mateksys @dr_pyro @truerccanada @foxeer.tech #westcoast #aeronaut @sexyminiquads @airvuzfpv https://www.instagram.com/p/Bt1n0vqnDEF/?utm_source=ig_tumblr_share&igshid=9mulnr71nusf