AMERICAN METHOD OF TUNNELING
In This Article We Covers American Method Of Tunneling In Soft Ground. FACTOR AFFECTING THE CHOICE OF A METHOD SIZE OF TUNNELTYPE OF GROUNDAVAILABLE EQUIPMENTMETHOD OF SEQUENCE OF EXCAVATION AMERICAN METHOD In This Method A Drift Driven Into The Top Of The Tunnel, The Drift Supported By Laggings, Caps, And Two Vertical Posts. The Sides Of The Drift Are Then Widened And Additional Support Is Provided Using Timber Planks And Struts. The Process Of Widening Continued Till It Reaches The Springing Level, Wall Plates Fixed At The Springing Level, Which Turn Supported By Vertical Posts. The Vertical Posts Now Occupy The Entire Roof Level, The Posts Supporting The Drift Can Then Removed And Tunneling Work Continued Further In A Similar Manner. American Method Suitable For Large Sized Highway And Railway Tunnels. It Does Not Required Heavy Timbers, Involves Simple Operation. However American Method Unsuitable For Tunnels Of Flat Bottom. SEQUENCE OF OPERATION A Top Drift Driven And Supported By Laggings, Cap Timber And Parts. Side's Widened. Walls Plates Introduced At The Springing Supporting To Arch Set. Then Vertical Posts Driven. Then Sides And Benching Cleared & Tunnel Lining Started. American Method Of Tunneling Thank You For Visiting (Allow Notifications For Further Updates) Check Out Our Video Tutorial Site. Fore Poling Method Of Tunneling Needle Beam Method Of Tunneling Belgian Method Of Tunneling English Method Of Tunneling Classification Of Tunnels Read the full article