#volvo engine

[starlightgenerator]

Volvo's Driverless Trucks Used at Open-pit Mine in Velfjord, Norway

Volvo’s Driverless Trucks Used at Open-pit Mine in Velfjord, Norway

Volvo Trucks says it is successfully testing six autonomous trucks that are hauling limestone from an open-pit mine in Velfjord, Norway. The Swedish truck manufacturer says in a news release its agreement with mining company Brønnøy Kalk AS is its first commercial solution involving autonomous trucks.

  The FH-model trucks travel 3 miles (5 km) through tunnels and outdoors from the mine to a…

View On WordPress

[starlightgenerator]

Volvo Engine Maintenance Contents for Different Period

Volvo Engine Maintenance Contents for Different Period

Before Daily Start

1, check engine oil: oil level should be between the top and bottom of the oil gauge. Oil quality: VDS or CF or above.

2, check the coolant level, the level should be about 5cm under the sealing surface of the cap.

3. Check the radiator and TAD chiller chips for blocking and, if necessary, clean them up (see serial number 11 of this table)

4. Check if the air filter is blocked.…

View On WordPress

[starlightgenerator]

Engine Electrical System Maintenance

Engine Electrical System Maintenance

This article mainly talks about Volvo Penta Engine Electrical System Maintenance and Battery Maintenance.

Never disconnect the current with the main switches when the engine is running, the alternator and electronics could be damaged. The main switches must never be switched off before the engine has stopped. If the circuit between the alternator and the battery is disconnected when the engine is…

View On WordPress

[starlightgenerator]

Cooling System Maintenance - Volvo Engine

Cooling System Maintenance – Volvo Engine

Cooling System

The engine’s internal cooling system makes sure the engine works at the right temperature. It is a closed system that must always be filled with a mixture of concentrated coolant and water in order to protect the engine against internal corrosion, cavitation and bursting due to freezing. Coolant of a suitable chemical composition must be used all year round. This also applies in…

View On WordPress

[starlightgenerator]

Instruments and Controls of Volvo Diesel Engine

Instruments and Controls of Volvo Diesel Engine

Display Control Unit

The DCU control panel is available as an optional accessory for the EMS (Engine Management System) electronic control system. The DCU is a digital instrument panel which communicates with the engine control unit. The DCU has several functions, such as engine control, monitoring, diagnostics, and parameter setting. The menus in the DCU system can be used to check, and in some…

View On WordPress

[starlightgenerator]

Engine Cooling Tests - Volvo Diesel Generator

Engine Cooling Tests – Volvo Diesel Generator

Cooling capacity

A cooling system installation’s cooling capacity is often measured using a reference temperature for coolant boiling point called ATB (Air To Boil). The ATB temperature is defined as the ambient temperature at which the coolant attains its maximum permissible coolant temperature. AOT (Air On Temperature) refers to the maximum permissible coolant temperature after the Volvo engin…

View On WordPress

[starlightgenerator]

How to Install Volvo Diesel Engine - Genset

How to Install Volvo Diesel Engine – Genset

Cooling system

Volvo Penta only uses liquid-cooled engines. The cooling system comprises a cooling water system and a cooling air system. The objective of the system is to lead heat from the engine to the surrounding atmosphere. Around 40 % of fuel energy is used to perform mechanical work, while the rest is lost as heat to the coolant and through the exhaust. The heat that is transferred to the…

View On WordPress

[starlightgenerator]

Volvo Penta TAD734GE Engines - Operator's Manual

Volvo Penta TAD734GE Engines – Operator’s Manual

This Operator’s Manual concerns the Volvo TAD734GE engine, an inline 6-cylinder direct-injection diesel engine. The engine is equipped with a common rail fuel injection system, IEGR (internal exhaust gas re-circulation), electronically- controlled fuel management (EMS 2), a turbocharger, a thermostatically-controlled cooling system and electronic speed control.

Presentation

EMS (Engine…

View On WordPress