#wireless pro game controller

[bryan360]

My YCCTEAM’s Wireless Switch Pro Controller - Part 9 (Gyro and Motion Controls) (w/ Super Mario Odyssey)

Hi guys. We know that we’re almost finished this month of 🍀March 2021. So I decided to bring my next YCCTEAM Controller topic today by surprise. Back in March 23rd that I covered the pervious topic about my controller’s battery test to my theory that took me more hours than I thought would be. Link Here

After that, I’m gladly to know I’ve recording this video since the 26th day to bring you guys my next test: gyro and motion controls. In fact, I gotten two of them for my two games I picked that had features of controls. So for my first half that I’ll would be testing for my 🎩🌎Super Mario Odyssey game! Thought I would never be showing this after last year post was my game’s progress during Cascade Kingdom Level. Link Here #2 It’s actually one year ago, but shamefully that I would’ve bring some more of what I did go through my progress. Well for this one, I almost be finished this as I’m in Bowser’s Kingdom since after clearing past levels back in June 28th, 2020. Though I could at least bringing you this as I testing my next YCCTEAM Controller topic. Before we can go through that, you may notice something different about this video. Well I did downsize the video cause my original one had too much size of saying “100 MB.” It works thanks to using some online converter sites, but what’s noticeable is my tablet being hold by something. Well, I think it’s time that I’ve been saving this since I found the right tablet holder not long months ago.

Photos taken: March 23rd, 2020

This is a lookalike phone holder from who made by “U YOUSE” as you can see from the back of the holder itself. I actually got this at home just to figure out to fit my tablets to hold. I even got pics of them trying on my tablets; including for my Nintendo Switch handheld console itself. I’ll be saving it for next time post soon, but for now after testing with my iPad to hold and record something with my Nintendo Switch was alright. 🙂👍 Though apologize for this video had a little bit close up, but this is what I getting to record to show my Switch and my YCCTEAM Controller seen together. No problem, though. Anyways, onto my next controller topic during Super Mario Odyssey. I boosted my game to land on Bowser’s Kingdom as I mention after clearing past levels nicely. Here you can see that I using my YCCTEAM Controller to test out some gyro and motion control features.

First off, I pressed the right analog stick to “look around” things with my YCCTEAM Controller into Gyro Control. I‘ve been using it for while back ago, but after remember testing sometimes it looks fine; albeit little bit rough with my one hand holding. At least knowing it works if I could use it for some places to see things. After that, I pressed back the right analog stick again to go into normal mode and onto the second test is the motion controls. I picked the controller with one hand again and carefully doing preforms of Mario using Cappy to throw things such as enemies to capture them for example. While I did on side ways to spin toss and aim down to straight toss throw, Sometimes I had trouble with doing up throw toss until 0:37 that I managed to pull it off. It’s tricky that I tried few times, but it’s good that it still working.

My thoughts:

I’ll be putting this as a good results after gyro and motion controls for my Super Mario Odyssey game; with my YCCTEAM Controller that really works fine. Normally I haven’t been using those since gamers using pro controllers mostly with the buttons included to throw toss things and it’s no surprise I’m fine with it. Nevertheless, it was a alright test to try on with my YCCTEAM Controller.

I think that’s all I could bring you unless I’ll be saving the second half for next month of 🐰April 2021 soon. Hoping you enjoy seeing my latest topic part for my controller I bring; especially revealing my tablet/phone holder I’ll be using for my future recordings and such....until I’ll be getting my own new one eventually. 🤷‍♀️

Pervious Posts for my YCCTEAM’s Pro Controller Topic:

Wireless Switch Pro Controller for Nintendo Switch/Switch Lite (Part 1) - Link Here #1

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Unboxing (Part 2) - Link Here #2

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Xbox One (Part 3) - Link Here #3

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Nintendo Switch’s Joy-Cons (Part 4) - Link Here #4

Testing Buttons (Part 5) - Link Here #5

Rumble Feature Testing (Part 6) - Link Here #6

Battery Charging Test (Part 7) - Link Here #7

Playtime Battery Life Results (Part 8) - Link Here #8

[bryan360]

My YCCTEAM’s Wireless Switch Pro Controller - Part 7 (Battery Charging Test)

Hey guys! I’m finally back to bring my next YCCTEAM’s controller part topic that I’d promised for this year. I’m hoping I’ll finished this for later months to give the results of how good was my pro controller is. It will take time though, so I’ll make sure to show the most of my YCCTEAM’s controller this year.

Anyways for the next topic, you probably know about I’ll be doing gyro control testing since I’d talked though from my pervious part topic last year. Actually I wanted to change plans a little cause I haven’t got myself a tablet stand so it can hold my tablet to help me recording video while using my controllers on hand. It would be tricky if I don’t have alternate items to hold my tablet, I even use my GulitKit Dock at first with my iPad Mini before giving up. It was last weeks ago, but one day that I actually got a right tablet stand so it definitely fits for my tablets and just I ever wanted to making recordings of me playing my YCCTEAM controller with my hands. Can’t wait to show it for next time soon, but for now I’m started off my next topic part for my YCCTEAM Controller with battery charging; which I happened to finished this last two days ago for February 2021. As you can see from my first edited photo on top🔝 is the instructions that I would needed those items I’d use my Nintendo Switch Console/Handheld with: The YCCTEAM Pro Switch Controller, Its 40-Inch Type-C Cable, and GuliKit Pocket Dock. I would have go to the other options by using my Samsung/Apple Adapter I’d use for my tablets....except my Samsung USB Cable worn out and ripped so I can’t plug it for the adapter cause reasons. That being said, I’m fine to do charging test by using with my GuliKit Dock.

Here’s the second edited pic of me plugging my Type-C Cable into behind my pocket dock; where the USB Socket from the middle should be. Looks simple enough, but should take note though if you wanted to play games while you needed to charge the controller you’ll would have to get it closer by sitting chair like I was. It was a 40-Inch Type-C Cable that I’d checked the length was not long enough. So its best that I can use my chair to get close of playing games with my controller while it’s charging.

Here’s the third edited pic after plugging my type-c cable into my pocket dock, but later come to plugging with my YCCTEAM Controller to see how it look when charging in place. Again, It would be tricky since my 40 Inch Type-C Cable wasn’t long enough to hold my controller while it charging. I’ll just place my controller til it’s fully charged, but at least knowing I had my chair to sit and play my controller while charging.

Here’s the fourth edited pic where I started my YCCTEAM Pro Controller’s Battery Charging Test by putting back my GuliKit Pocket Dock next to the T.V.; mostly plugging my ac adapter for power on my Nintendo Switch (for charging as well) and the HDMI Cable to connect my T.V. to help display screen from my Nintendo Switch console. I can’t leave without my Type-C Cable though as I’ll using it to charge my controller. Good thing from last weeks ago that’s I powered down the controller after playing Super Smash Bros Ultimate game. So let’s get into it.

Here’s the fifth edited pic that I actually got this first before showing putting back my GuliKit Dock next to my T.V. However it’s a same thing where I’d charging my controller and shows that is actually working. Thought it could only works if I putting on my Switch console/handheld into the dock to see if it can charge, but guessing without my Nintendo Switch on dock can work other ways. Nice! 👍

Now for the sixth and final edited pic I took screenshot from my Samsung Galaxy Tab E. Even though I’d said I wanted to keep safe my tablet til I’ll be getting a new USB Cable sooner or later, but at least the battery from my Tab E still have more juice to handle so why not to use it as a stopwatch to count on how much charging time for my YCCTEAM Controller full? It really took more hours that I want to stay during nighttime, but worth to check out the results of my controller charging a little. I got 3 hours and 43 minutes as I kinda not expected since I checked online to see my controller’s charge time was “2.5 hours.”

My Thoughts:

I can take this as a long battery charging results I gotten; even I should’ve gone this during the morning for the last 2 days before going to bed. ^^* Nevvertheless, 3 hours of charging my YCCTEAM’s Controller was not bad to took. I can still be using my controller to play one of my games while charging for 3 hours left. If not, I can leave it to charge full and maybe doing drawing drafts to take waiting time I wanted.

Now that saddles, I was thinking for the next topic about spreading playtime with my YCCTEAM Controller til the battery runs out eventually. That way, I can use my tablet again for stopwatch results. Although if or not will be my Samsung Galaxy Tab E, at least my iPad Mini will work out differently. See ya guys next time! 👋

Pervious Posts for my YCCTEAM’s Pro Controller Topic:

Wireless Switch Pro Controller for Nintendo Switch/Switch Lite (Part 1) - Link Here #1

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Unboxing (Part 2) - Link Here #2

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Xbox One (Part 3) - Link Here #3

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Nintendo Switch’s Joy-Cons (Part 4) - Link Here #4

Testing Buttons (Part 5) - Link Here #5

Rumble Feature Testing (Part 6) - Link Here #6

[bryan360]

My YCCTEAM's Wireless Switch Pro Controller - Part 8 (Playtime Battery Life Results)

Hi guys and my friends. I'm back to bring you my next YCCTEAM Controller topic that I took from past weeks of 🍀March 2021, but man that is like took forever to show this as my playtime results after using my controller. Just to clarify or something, I've been doing my next topic part with my controller to see how much playtime I'll having til the controller's batteries run out. Only thing is that my YCCTEAM Controller's battery had been still running well through some days I tracked on; from back in March 5th until 14th til the controller's battery finally almost running out as I stopped. I would've original plan to stop my results when if my YCCTEAM Controller's battery run out completely, but maybe not? ^^* I mean if it would to, then I would be take plenty of hours during the weekends more often. However since I already got the results from top, I would take a guess to learn how much playtime til the batteries runs out eventually.

By the way, I'd use my iPad Mini 2's timer and screenshots of my results I've putting down I gotten. This one different cause I took them back in March 5 til 14th that you already know. It won't be simply unlike my charging results for my YCCTEAM Controller I did last time.

1st Image from top left

From March 5th that I started this progress with my YCCTEAM Controller to track time; spending hours of playing Super Smash Bros Ultimate like I always do. I even picked the latest new fighter that you may know, but best that I can save my thoughts soon for this month or another month if I had trouble with my schedule a little. Nevertheless, at least knowing it took me of what it looks like 2 hours and 52 minutes on first try.

2nd Image from top right

It's been 7 days after I was doing some stuff with homework and drawing to get by, but on day 12th I'm back to continuing of my test at least 1 hour and 26 minutes through Super Smash Bros Ultimate a second time. ^^* Again that I been using the latest new fighter by doing Classic Mode, but it so hard that I was so close to getting 9.9 Intensity score. Yet the battery for my controller still fully charged of what I saw on screen.

3rd Image from middle left

At day 13th, I putting up a notch by doing a third try using my controller to play Luigi's Mansion 3; which if you know that I owned it from last year. Link Here It was actually a good game that I remember my first play to try back in December 29th, 2020. However, I wanted to reset things up to get any collectables of ghost and gems to hoping of getting that 100% completion. For doing so, I using my iPad Mini 2's timer again to track how much time I'll having to get Luigi's Mansion 3's 100% completion; while trying to drain the battery of my controller. So far, it took me 4 hours and 4 minutes before taking it break. At least knowing the batteries from my YCCTEAM Controller had finally powered down on half. 🙂👍🏼

4th Image from middle right

The same day that I went through lunch later, but back to continuing my progress still; even I would reset the timer instead I should've save it while playing Luigi's Mansion 3 again. It took me about 4 hours and 35 minutes I gotten before decided to take a ease. Yet the batteries from my YCCTEAM Controller still had half power before hoping it can reach to power down.

5th/Final Image from bottom last

Finally that I REALLY going through there for day 14th as I took 9 hours and 55 minutes of playtime with my YCCTEAM Controller. Yeah, it actually go through there non-stop at least on Sunday; just to make sure the batteries can finally drain out some more. Don't worry that I'm fine about having a blast with Super Smash Bros Ultimate and Luigi's Mansion 3 games at the same time; in making turns of course. At least knowing my controller's batteries is finally almost low power just before I can take a break at 7:20 P.M.

Whew! It was really something that I been using my YCCTEAM Controller through about 4 days (since from past 7 days that I was out after March 5th for my first progress til 14th to finished) with the batteries is working fine through more hours than I thought would be. Wondering what kind of batteries it was to power up my controller? Well, I look on its instruction book for the controller's battery was built in "1000mAh polymer lithium" that it can run about 8-10 hours.

However, I don't think that wasn't it after I been through my progress with my YCCTEAM Controller that took me days til the battery is running low. Also, the controller on the back saids that the battery capacity was "3.7V 1200mAH" instead of "1000mAh" from what the instructions book said.

It really get me confused the fact the controller's battery had a different built-in that it tooks me days after using it for my Nintendo Switch console with Super Smash Bros Ultimate and Luigi's Mansion 3. After checking some results at the end though, I'm guessing the different built-in battery set for my YCCTEAM Controller will take about 20 or more hours of playtime. I'm not sure it was the official answer I'll take, but still.

My Thoughts:

The batteries for my YCCTEAM Controller I've been using for days sure works me hard, even taking through more hours of playtime can be a good thing for the weekends to plan with your ownNintendo Switch system. That being said, I couldn’t put a finger on about what kind of build-in battery for my YCCTEAM Controller had gotten after playing it for 20 or more hours. I even look through online to double check the same controller’s details in Amazon.com, but still said it can take 10 hours of playtime. Link Here

I’m taking a guess after reading the controller on the back saids the battery capacity was “3.7V 1200mAH” had to do with taking 20 or more hours after using my controller. Hard to say, but it was likely in theory. Who knows if I’ll be taking another battery result test for next time soon, but for now it was a good first one I gotten from past weeks of 🍀March 2021.

Before I can finish off my next topic part for my YCCTEAM Controller and onto the next one, I like to apologize to my friends that I’ll be delaying my next DeviantArt posts til next month for Sam’s new bio and reactions with my main OCs to Pyra/Mythra after joining Smash Bros. Let’s just say that I’m working some drafts to make and other one of course, my homework writing after the package send me by mail. Yeesh.... 😑 Again, I’m sorry to my friends that I’ll be delaying my next DeviantArt posting plans at least next month soon. Though considering we have 2 weeks left until March 31st; which is the exact date til Nintendo will stop selling Super Mario 3D All-Stars, I would get into showing me playing my last year’s Christmas game now. I’ll even added through my next topic part with my YCCTEAM Controller on hand, but I promised I’ll bring up the gyro control testing first. Sorry. ^^*

Pervious Posts for my YCCTEAM’s Pro Controller Topic:

Wireless Switch Pro Controller for Nintendo Switch/Switch Lite (Part 1) - Link Here #1

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Unboxing (Part 2) - Link Here #2

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Xbox One (Part 3) - Link Here #3

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Lite Comparison with my Nintendo Switch’s Joy-Cons (Part 4) - Link Here #4

Testing Buttons (Part 5) - Link Here #5

Rumble Feature Testing (Part 6) - Link Here #6

Battery Charging Test (Part 7) - Link Here #7

[bryan360]

Finally that after waiting one month ago, I still have my late birthday gift to show since my parents gave me back in September 18th, 2020; despite having my Pirahna Plant as my first gift I purchased at Eshop. Link Here

Apologies that I happen to be late for today as I was look into Steve and Alex's Presentation video where Sakurai delivers info, but that gonna be another time with my reactions and from my main OCs. Anyways, time to reveal my late birthday gift for this month. It's something I picked on as a newer accessory between my experience of playing and as a little solution til someday for my other one would get fixed eventually. At least knowing it really works as a charm for testing purpose for starters, it's.....

Wireless Switch Pro Controller for Nintendo Switch/Switch Lite

You get it right, I got my first Wireless Switch Pro Controller as my late birthday gift back in September 18th. at last. However, this one is a different  brand that it's manufacturer/produced by YCCTEAM than the officially from Nintendo. I seen the site of YCCTEAM that makes other gaming controllers and accessories for PlayStation, Xbox, and Nintendo and gonna say that it looks promising. Link Here

As for the price was not bad, including the fact for my Wireless Switch Pro Controller that my family got from Amazon.com was $29.99 (or $30.00). That's a good thing since the official Nintendo Switch Pro Controller cost $69.99 (or $70.00) expensively in comparision.

That's the only different branded controller I gotten for my birthday this year,  despite as a late present to earned it. There were other pro switch controllers out there though when I go on search results at Amazon.com; like this one. Link Here

But the end, I already picked the YCCTEAM's Pro Controller with $30.00 price that my mom can afford. Besides, I'm saving up "Super Mario 3D All-Stars" game for my 2020 Chirstmas gift that I'm hoping to get one before March 2021 it will ran out in limited time. I had to stop here, but stay tuned when I'll delivered more of my wireless controller pics in part 2 tomorrow; including any details about the pro controller's features and such. Hope you'll like my own reveal for this month of October 2020! ;)

[bryan360]

I'm back of showing my continue topic for my new YCCTEAM's Wireless Switch Pro Controller! At last from absent since Oct. 10th, 2020 where I done my comparison with my Nintendo Switch Joy-Con Controllers. (Link Here)

This is my first recording video about testing of those buttons from the pro controller. I just go to Nintendo Switch's System Setting, then look down for Controller and Sensors to search Test Input Devices. This is where I can go on test selections on buttons and touch screen, but I mostly wanted pick the buttons cause that why I'm bringing to this. I started off my pro controller's buttons test by looking the info when I pressed them, then symbols well popped up to show. I did all the buttons from my pro controller and it works well as I hope, expect for the HOME, Capture, Power, Volume and Sync Buttons if you look below of it's note. Don't worry that they works too as well. *thumbs up*

I can show you more of my post that I will continue my YCCTEAM's controller topic for this month...unfortunately not now for next week cause I'm hiatus of my DeviantArt page since 9 days and I wanted to bring on my art post again. Also I would consider having my P-Pal @murumokirby360 and me doing another secret art trade for this month. I do have one thing to bring you guys for tomorrow's saturday that I been waiting to save. Since I already have my pro controller, I wanted to share of why I choose this instead of my Joy-Con Controllers still working fine. You may thinking that I have my left Joy-Con Controller drift? Well sometimes, but something else. Stay tuned as I would show my problems for my Switch Joy Controllers to share.

[bryan360]

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Pics - Part 3 (Comparison with my Xbox One)

Welcome back for my next wireless pro gaming controller post; as now I can covered comparisons with my other few gaming controllers that I had: Xbox One Wireless Controller and Nintendo Switch’s Joy-Cons Controllers. Let’s get started by showing off the first comparison with my Xbox One Wireless Controller I’d took pics with back in September 18th, 2020 at 4:56 PM to 5:05 PM.

Note: Thankfully I got 10 perfect photos to upload since it’s easier to covered to top to bottom. So no need of “PicsArt” editing to collage one of my photos together.

1st, 2nd, and 3rd Images

It was really obviously to look both side of my wireless controller and my Xbox One wireless controller: They’re both have same design, lookalike buttons + analog sticks, and black colored. I placed it front, back and sided with both controllers, even on my chair so I thought I can take photos without any shade messing up....Sometimes. Also the Xbox One Controller action buttons is red, blue, yellow,and green than all grey from my pro controller.

4th and 5th Images

Next that I place top my controllers from my pro controller to my Xbox One Controller. I finding in different sizes for my Wireless Pro Switch Controller was little bit small than my Xbox One Controller (or maybe the other way around); Not to mention it’s weight was light to compared the Xbox One controller being bit heavy when I hold both on my hands.

6th Image

Just making it standing up straight by using my chair. (which is very comfy to sit through whether be for playing video games or drawing stuff with my sketch pad)

7th and 8th Images

Now I’d putting my controllers place in front to show it’s backs. Looks similar with be in same black color, but with different charging port looks with being for my Xbox One Controller and it’s plug in charging battery port from Fosmos that I got it from few years ago as I gift from my family.

9th and 10th Images

For the final one, it’s little bit tricky when I trying to place my controllers this way I wanted on both sides. At least that I managed and took photos on it and really looks similar with different triggers buttons design.

My thoughts to comparison my Wireless Pro Controller for Nintendo Switch to my Xbox One Controller was interesting how it looks the same with the design, the coloring, and had lookalike button layouts. Their were key differences with being it’s sizes and height; also with charging battery ports to plug through if my controller run out of juice. Oh, I almost forget with their handle being different as well. The Xbox One Controller had plastic handle to grip to, but with my YCCTEAM’s wireless pro controller had “texture anti-slip” handle to grip on and it was really good. Needless to say, it was an interesting comparison with my pro controller to my Xbox One controller. Hoping for tomorrow that I can covered another comparison with my Nintendo Switch’s Joy-Con controllers, so see ya for tomorrow soon. ^^ *thumbs up*

[bryan360]

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Life Pics - Part 2 (Unboxing)

I’m back to every followers, friends, and hoping gamers as I’m taking on part 2 for my first new wireless pro gaming controller for my Switch system. I wanted to make it as a beginning though when it comes to unboxing; just to have a full look on my controller. Anyways, let’s get started into part 2. (Sorry for making it a late post, though.)

Note: I used some PicsArt edited to collage one of my photos together so that way I won’t having trouble to only show 10 photos each due to the Tumblr’s limitations.

1st & 2nd Images (in combined)

* This is a beginning photos when I finally got my first wireless pro controller from my family gave me back in September 18th, 2020 at 4:20 P.M.

3rd & 4th Images (in combined)

* After I taking down the Amazon box, behold of what it is the box of the wireless pro controller itself. It’s white so nothing else, but it looks nice.

5th image

* Finally that I’m almost about to unwrapped my gaming controller just as I thought to imagine to unwrapped my official Nintendo Switch Pro Controller. The controller was wrapped in bubbles, but it also came with the USB Type-C cable for charging. Same goes for my Xbox controller and my other USB charging cable, but I’m gonna save it on future posting soon.

6th & 7th Images (in combined)

* Here it is that I revealing my first wireless pro controller on first hand....almost though as soon I want to take off the white foam from the analog sticks and a D-Pad. Same goes with this green note attached, but it looks important so thankfully I took a pic of it before even to bother throw away so guilty. ^^*

8th Image

* On the back from the gaming controller looks and feels nice when I gripped it on my hands. Placing the two textures underneath with my middle fingers really smoothes of what it looks little bit like skins. As for my palms when holding it, It also feels nice with the handles as I thought it’ll be; saying the fact I looked it’s details for the handles that had “Texture Anti-Slip” from Amazon.com. Not bad. *thumbs up* Also there’s a sticker in it that shows the model for my controller and it’s battery capacity. Hoping I can show the battery test results soon that if the battery capacity good or something.

9th & 10th Images (in combined)

* Each side of my wireless pro controller with the handles that had “Texture Anti-Slip” Look not bad.

11th & 12th Images (in combined)

* Now for the top of my wireless pro controller as I almost gonna removed the white foam and a green note later on. It’s show the L/ZL and R/ZL Buttons that I’ll be using it for gaming purpose. Also it had a plug for my USB Type-C cable to connect charging when if the indicator was full. Plus there’s the reset button that I can disconnect/connect my controller to my Switch console whether I wanted to choose.

13th Image

* I removed the white foam and green note from the front of my wireless pro controller, but not before take a pic of this green note that I’ll be keeping it if I’ll forget how to charge it properly. And yes if I’ll learn to avoid battery damage.

14th & 15th Images

* You seen from my first post about my late birthday gift reveal, but that was in first look front of my wireless pro controller to go. Looks the same of what it is to compared to the official Nintendo Switch Pro Controllers are: Two analog sticks, D-Pad button, Four function control keys, Plus and Minus buttons, screenshot, and HOME button when I press these. It works when I turned on the Switch console, but wishing I can show in videos soon.

16th Image

* I’ll stop it at the final pic to show. It’s random, but there’s the instruction manual that I been reading through it if I’m ready to learn to set up my pro controller. Good thing that I learn to set up my pro controller and it’s features. No problem that I can read it again, though.

That’s all I can show you in part 2 for my Wireless Pro Controller for my Nintendo Switch console, but yet it’s not over when I’m finished by my review coming up. For now in part 3 that I can do in comparison with my other gaming controllers that I got. It’ll be later for this week, but see ya guys when I’ll show up the latest post with my late birthday gift. *thumbs up*

[bryan360]

My YCCTEAM’s Wireless Switch Pro Controller for Nintendo Switch/Switch Pics - Part 4 (Comparison with my Nintendo Switch's Joy-Cons)

I'm back with my second comparsion post for my YCCTEAM's Wireless Switch Pro Controller. Yesterday that I'd already did the first one to compared my Xbox One Wireless Controller. Link Here

So for today, I'll be showing off the next one being to compared with my Nintendo Switch's Joy Cons Controllers; since I'd took photos on it back in September 18th, 2020 at 5:08 PM to 5:15 PM.

This will be my "almost" last comparison post that I can show you as I already given my old Nintendo Wii system and my Wiimote controllers to my sister back in January 2020; which I happen to talk through from my status update. Link Here

I know that I would ask her to borrow her controllers, but maybe next time if she's okay with it. Anyways, let's get started. Thanksfully I got only 6 photos of it, so no "PicsArt" eddited to make one of my pics altogether.

1st, 2nd, 3rd, and 4th Images

Just like my first comparison pics with my Xbox One Controller, I put my Pro Switch Controller and my Joy-Cons in front faces, including trying to make it straight up by using my chair. For my Joy-Cons though it was hard to get it straight up without getting drops on, but I managed it at the end; no problem. Seeing the comparsion was different cause my Joy-Cons is smaller, also with it's button layout than from my pro controller's bigger button layout. Not to mention it's different D-Pad that I finding from my pro switch controller's D-Pad better.

5th and 6th Images

Onto it's back in place which I can finding the same difference; including from it's L/LZ and R/RZ Trigger Buttons in different sizes.

I guess this is what I covered for my next comparsion post with my Nintendo Switch's Joy-Con Controllers....short than usual. At least knowing what's my thought for this comparison post was nice despite difference, but had lookalike button layouts to what's on my pro switch controller; except the D-Pad's that I more into from the pro.

That's all for now, but next time that I'll would do in my recording video to test out my pro controller works through Nintendo Switch system settings....If only I can have a "holder" for my tablet to place while recording instead of using my both hands. Until then, see ya next time. *thumbs up*