Tensor Technologies leads in Canada's hydrogen energy revolution, delivering groundbreaking solutions and setting industry standards. We specialize in developing and manufacturing cutting-edge components and testing equipment essential for the H2 sector. Join us in powering the future with our commitment to excellence and innovation in hydrogen technology.
https://www.tensortechs.com/
Tensor's Hydrogen Material Testing Bench provides precise GDL/PTL testing with complete cell hardware solutions. Reliable evaluation for fue
Including GDL/PTL Tester and Testing Cell Hardware.
Types of Hydrogen Key Material & Component Test Bench
ORIGIN-E Cell Hardware
Designed for ease of use, the dummy cell incorporates a hand-tightened mechanism, adjustable stack compression, and an integrated endplate heater to maintain optimal operating conditions.
GDL/PTL Material Tester
Compression-dependent analysis of GDL characteristics: thickness, contact/in-plane/sheet resistance, and in-plane/thru-plane permeability.
Tensor's EOL200 fuel cell activation station delivers fast, consistent PEM stack conditioning with real-time data monitoring and integrates
EOL200 PEM Fuel Cell Stack Activation Station
The EOL series is tailored to meet customer requirements, focusing on enhancing the activation speed, stability, and consistency of the stack. The test station controls the flow, pressure, temperature, and humidity of the anode, cathode, and cooling loops of a fuel cell, simulating operational conditions while performing real time data aquisition. The test station's control system is Industry 4.0 ready and can seamlessly integrate with MES and SCADA control systems of the user's factory or laboratory. With its dual stack configuration mode, it accelerates testing efficiency and throughput.
*Customized products, please send your requirements to [email protected]
Basic Functions of EOL200 PEM Fuel Cell Stack Activation Station
● Anode/Cathode Flow Rate, Stoich, Temperature, ● Humidity and Pressure Control
● Dry/Wet Gas Switching
● Estop and Manual Nitrogen Purge
● Stack Fast Set Up/Disconnection
● Rapid Heating and Humidification of The Stack
● Stack Activation
● Integrated Online Leak Test
● Polarization Curves and Other Functional Tests
● Cell Voltage Monitoring
● Intrinsic Safety & Alarming System
● HMI with Data Acquisition & Analysis
● 24/7 Unattended Operation
Optional Functions of EOL200 PEM Fuel Cell Stack Activation Station
Tensor Technologies provides durable PEM electrolyzer coatings for bipolar plates & fuel cells. High conductivity, corrosion resistance & lo
Electrolyzer Coating Service
Tensor’s electrolyzer coatings for PEM water electrolysis bipolar plates provide superior corrosion resistance, excellent electrical conductivity, and enhanced durability, ensuring long-term efficiency and reliability. These coatings offer a cost-effective balance of performance and longevity, making them an ideal choice for advanced PEM electrolysis applications.
*Customized products, please send your requirements to [email protected]
Main Coating Characteristics
Maximum corrosion resistance
H2 embrittlement protection
Low contact resistance
Efficient thermal conductivity
Low cost per unit
Plate Coating Equipment Capability
Load Lock :Automated
Part Carrier :Multi-plate carrier fixture
Deposition Rates :Up to 500 nm/min depending on target material used
Tensor's AM300W AEM electrolyzer tester provides comprehensive 300W cell evaluation with anode/cathode flow, pressure & temperature control,
AM300W AEM Electrolyser Tester
AM300W electrolyzer test bench can be used for testing 300W AEM electrolyzer cell. This station can control the flow, pressure and temperature of the anode and cathode of the electrolyzer and simulate the working condition, and collect various data of it.
*Customized products, please send your requirements to [email protected]
Basic Functions of AM300W AEM Electrolyser Tester
● Anode (cathode) KOH solution flow and pressure control
● Gas production rate and concentration measurement
● Stack temperature control
● Water supply conductivity & level control
● Exhaust water recovery and amount/content test
● Pressure regulation at high pressure during flow rate shift
● Electrolyzer work condition simulation and performance test
● Cell Voltage Monitoring
● Intrinsic safety & alarming system
● HMI with Data Acquisition & Analysis
● 24/7 Unattended Operation
Optional Functions of AM300W AEM Electrolyser Tester
Tensor's AM1kW AEM electrolyzer tester provides comprehensive 1kW cell evaluation with anode/cathode flow, pressure & temperature control, s
AM1 AEM Electrolyser Tester
AM1kW electrolyzer test bench can be used for testing 1kW AEM electrolyzer cell. This station can control the flow, pressure and temperature of the anode and cathode of the electrolyzer and simulate the working condition, and collect various data of it.
*Customized products, please send your requirements to [email protected]
Basic Functions of AM1 AEM Electrolyser Tester
● Anode (cathode) KOH solution flow and pressure control
● Gas production rate and concentration measurement
● Stack temperature control
● Water supply conductivity & level control
● Exhaust water recovery and amount/content test
● Pressure regulation at high pressure during flow rate shift
● Electrolyzer work condition simulation and performance test
Tensor's AEM Electrolyzer Test Bench enables accurate simulation of operating conditions, ensuring robust performance and durability testing
AEM electrolyser Test Benches simulate work condition of AEM electrolyser stack and conduct perfomance test, durability test and electrochemistry analysis of AEM cells/stacks.
AM1 AEM Electrolyser Tester
The AM1kW electrolyzer test bench is designed for evaluating 1kW AEM electrolyzer cells, featuring precise control of anode/cathode flow, pressure, and temperature parameters. The system enables operational condition simulation and comprehensive data acquisition for performance analysis.
AM300W AEM Electrolyser Tester
The AM300W electrolyzer test bench is designed for comprehensive evaluation of 300W AEM electrolyzer cells, featuring independent control of anode/cathode flow rates, pressure, and temperature parameters. The system enables realistic operational condition simulation while performing multi-channel data acquisition for performance analysis.
AM500W AEM Electrolyser Tester
The AM500W electrolyzer test bench is designed for comprehensive performance evaluation of 500W AEM electrolyzer stacks. It features independent control of flow rates, pressure, and temperature for both anode and cathode sides.
AM10 AEM Electrolyser Tester
The AM10kW electrolyzer test bench is engineered for comprehensive evaluation of 10kW AEM electrolyzer stacks. The system provides independent control of anode and cathode parameters including flow rates (0-20 L/min, ±1% accuracy), pressure (0-35 bar), and temperature (20-90°C).
AM20 AEM Electrolyser Tester
AM20kW electrolyzer test bench is designed for evaluating 20kW AEM electrolyzer cells. It controls anode/cathode flow, pressure, and temperature, simulates operating conditions, and collects performance data.
AM50 AEM Electrolyser Tester
The AM50kW electrolyzer test bench is designed for evaluating 50kW AEM electrolyzer cells.
What Are AEM Electrolyser Test Bench Used For?
Anode solution flow and pressure control with dry/wet mode
Optional Cathode solution flow and pressure control with dry/wet mode
Gas production rate and concentration measurement
Stack temperature control
Water supply conductivity& level control
Optional Solution PH level control
Exhaust water separation and amount/content sampling
Pressure regulation at high pressure during flow rate shift
Electrolyser work condition simulation and performance test
Cell Voltage Monitoring
Intrinsic safety& alarming system
HMI with data acquisition& analysis
24/7 Unattained Operation
Pressure boost with nitrogen
How Does AEM Electrolyser Test Bench Work?
The liquid recirculation modules on Anode (and optional Cathode) supplies KOH or other solutions to the DUT (Device-Under-Testing) at demanded temperature and flow rates. After the electrlysis process while reaction pressure and temperature are controlled, H2/O2 mix with liquid and then exit the DUT and then go to the separation module to remove water. After the drying process, the gases enter analyzing modules to measure flow rates and concentrations.
Highlights of AEM Electrolyser Test Bench
1. Cathode gas back pressure control technology: Install a new type of back pressure valve on the cathode gas discharge path of the electrolytic cell to improve the accuracy of back pressure control.
2. Large-span flow rate regulation technology. The test bench is downward compatible and can meet the testing requirements of some unconventional working conditions.
3. Precise control technology for alkali solution concentration. Continuously adjust the supply of pure water or alkali solution based on the real-time alkali solution concentration collected by the alkali solution concentration meter to ensure that the alkali solution concentration remains within a controllable range.
