Sans titre

[ablalaouari]

Automotive

As many of us know far too well, the job market is tough, and many of us are looking for some extra cash. If this is the case for you, or if you're just looking to get some extra money for something new and shiny, you may be considering selling your ATV. It might hurt to let your baby go, but enthusiasts are often willing to shell out some serious cash for a nice used ATV. Notice the keyword there: nice! A beat up old thing will probably steer potential buyers away from the pictures alone.

Automotive

On top of that, knowledgeable buyers may very well ask to take a test run. Such knowledgeable buyers are probably the ones who will be willing to pay the most of top-quality equipment. With all of this in mind, you'll want to make sure your ride is in the best shape possible before you start posting ads. Fortunately, following a few best practices will make this easy enough, while helping you to bring in as much money as possible.

Automotive

General Upkeep

The first thing you'll need to do is make sure your used ATV is in prime functioning condition. Examine the frame for rust, as this could indicate a crack. Cracks can be fixed by some simple welding by a mechanic, and the repairs should be fairly inexpensive. Check CV joint boots for cracks and general wear and tear. Use a flashlight to look in the gas tank for rust, and check to see if the oil is contaminated (it'll look thick and discolored if so).

Automotive

Check all of your tires for worn bearings by moving them from side to side, and replace them if necessary. Remove the seat, take the air box lid off, and make sure it's clean and dry. Make sure that all front and rear sprockets are straight and uniform with no wear and tear, and test the breaks to see that they're not sticking. Check the exhaust pipe and ensure that there's a spark arrestor. Finally, make sure the tires are fairly fresh.

Remember: everyone who looks at your used ATV knows that it is...

Automotive

well, used. Anybody who's looking for perfect quality will likely be willing to spend the money for a new one, so don't worry too much about perfection. The key to everything above is to make sure that everything is in working order and to fix any damages to the structural integrity before selling it off. Not only is it common courtesy, but it will also ensure that an experienced rider won't be put off by unnecessary wear and tear upon inspection.

Automotive

Appearance

Once your vehicle is structurally fit for sale, you'll want to make it pretty for the pictures. First off, remove any stickers you've put on over the years. Buff out or repaint any scratches on the body and replace torn seat cushions or broken plastic. Give your used ATV a good wash, and oil chains and gears.

Once again, a good appearance is key. As they say, a picture is worth a thousand words. With the tips above, you should be able to get a good offer on your used ATV.

Automotive

Article Source: http://ift.tt/1C47d2R

Automotive ===> www.1firstin.com

[ablalaouari]

Automotive

As many of us know far too well, the job market is tough, and many of us are looking for some extra cash. If this is the case for you, or if you're just looking to get some extra money for something new and shiny, you may be considering selling your ATV. It might hurt to let your baby go, but enthusiasts are often willing to shell out some serious cash for a nice used ATV. Notice the keyword there: nice! A beat up old thing will probably steer potential buyers away from the pictures alone.

Automotive

On top of that, knowledgeable buyers may very well ask to take a test run. Such knowledgeable buyers are probably the ones who will be willing to pay the most of top-quality equipment. With all of this in mind, you'll want to make sure your ride is in the best shape possible before you start posting ads. Fortunately, following a few best practices will make this easy enough, while helping you to bring in as much money as possible.

Automotive

General Upkeep

The first thing you'll need to do is make sure your used ATV is in prime functioning condition. Examine the frame for rust, as this could indicate a crack. Cracks can be fixed by some simple welding by a mechanic, and the repairs should be fairly inexpensive. Check CV joint boots for cracks and general wear and tear. Use a flashlight to look in the gas tank for rust, and check to see if the oil is contaminated (it'll look thick and discolored if so).

Automotive

Check all of your tires for worn bearings by moving them from side to side, and replace them if necessary. Remove the seat, take the air box lid off, and make sure it's clean and dry. Make sure that all front and rear sprockets are straight and uniform with no wear and tear, and test the breaks to see that they're not sticking. Check the exhaust pipe and ensure that there's a spark arrestor. Finally, make sure the tires are fairly fresh.

Remember: everyone who looks at your used ATV knows that it is...

Automotive

well, used. Anybody who's looking for perfect quality will likely be willing to spend the money for a new one, so don't worry too much about perfection. The key to everything above is to make sure that everything is in working order and to fix any damages to the structural integrity before selling it off. Not only is it common courtesy, but it will also ensure that an experienced rider won't be put off by unnecessary wear and tear upon inspection.

Automotive

Appearance

Once your vehicle is structurally fit for sale, you'll want to make it pretty for the pictures. First off, remove any stickers you've put on over the years. Buff out or repaint any scratches on the body and replace torn seat cushions or broken plastic. Give your used ATV a good wash, and oil chains and gears.

Once again, a good appearance is key. As they say, a picture is worth a thousand words. With the tips above, you should be able to get a good offer on your used ATV.

Automotive

Article Source: http://ift.tt/1C47d2R

Automotive ===> www.1firstin.com

[ablalaouari]

ATV

Automotive

As many of us know far too well, the job market is tough, and many of us are looking for some extra cash. If this is the case for you, or if you're just looking to get some extra money for something new and shiny, you may be considering selling your ATV. It might hurt to let your baby go, but enthusiasts are often willing to shell out some serious cash for a nice used ATV. Notice the keyword there: nice! A beat up old thing will probably steer potential buyers away from the pictures alone.

Automotive

On top of that, knowledgeable buyers may very well ask to take a test run. Such knowledgeable buyers are probably the ones who will be willing to pay the most of top-quality equipment. With all of this in mind, you'll want to make sure your ride is in the best shape possible before you start posting ads. Fortunately, following a few best practices will make this easy enough, while helping you to bring in as much money as possible.

Automotive

General Upkeep

The first thing you'll need to do is make sure your used ATV is in prime functioning condition. Examine the frame for rust, as this could indicate a crack. Cracks can be fixed by some simple welding by a mechanic, and the repairs should be fairly inexpensive. Check CV joint boots for cracks and general wear and tear. Use a flashlight to look in the gas tank for rust, and check to see if the oil is contaminated (it'll look thick and discolored if so).

Automotive

Check all of your tires for worn bearings by moving them from side to side, and replace them if necessary. Remove the seat, take the air box lid off, and make sure it's clean and dry. Make sure that all front and rear sprockets are straight and uniform with no wear and tear, and test the breaks to see that they're not sticking. Check the exhaust pipe and ensure that there's a spark arrestor. Finally, make sure the tires are fairly fresh.

Remember: everyone who looks at your used ATV knows that it is...

Automotive

well, used. Anybody who's looking for perfect quality will likely be willing to spend the money for a new one, so don't worry too much about perfection. The key to everything above is to make sure that everything is in working order and to fix any damages to the structural integrity before selling it off. Not only is it common courtesy, but it will also ensure that an experienced rider won't be put off by unnecessary wear and tear upon inspection.

Automotive

Appearance

Once your vehicle is structurally fit for sale, you'll want to make it pretty for the pictures. First off, remove any stickers you've put on over the years. Buff out or repaint any scratches on the body and replace torn seat cushions or broken plastic. Give your used ATV a good wash, and oil chains and gears.

Once again, a good appearance is key. As they say, a picture is worth a thousand words. With the tips above, you should be able to get a good offer on your used ATV.

Automotive

Article Source: http://ift.tt/1C47d2R

Automotive ===> www.1firstin.com

ATV Automotive from 1Firstin http://ift.tt/1C47d2S via IFTTT

[ablalaouari]

Automotive The new 2015 Honda CB300F Model is here. This Honda Motorcycle comes in a great lightweight design. It's a nimble-handling naked motorcycle that provides tons of fun to both the experienced and newbie motorcyclists. With its 300-class engine, this new motorcycle model from Honda portrays a dash of attitude as well as independence, plus extensive credibility. So, whether you are zipping around town to catch fun, or commuting from place to place, the roomy ergonomics and the power-band of the Honda CB300F is designed to make each and every ride a fun ride. Automotive Features of the CB300F Honda Motorcycle Lightweight, Narrow and Low The single-cylinder machine of this fun-filled motorcycle makes it narrow. And, with the seat measuring 30.7-inch in height, this bike is low and feels light since it weighs only 348-pounds. All these promote easy ride and handling. Automotive Great Fuel Efficiency The CB300F Honda bike is highly rated at the gas pump in terms of fuel economy. Its fuel efficiency rating is approximately 71 miles per gallon. It is also a passenger-capable bike, and of course freeway legal. It is a complete package of style combined with fun. Automotive The Power of Single-Cylinder Engine The single-cylinder engine alongside fuel injection, plus a counter-balancer and double-overhead cams that come with the 2015 Honda CB300F provide a good number of real benefits. One of such great benefits is power delivery: the sort of torque and midrange power that a single offers is suitable for all levels of cyclists and riders. Automotive Counterbalance Shaft The CB300F Honda bike's counter-balancer feature makes the bike a smooth runner. You are simply combining narrow overall width as well as power benefits of a single with the effortlessness of a multi-cylinder motorcycle. Automotive Disc Brakes This stylish Honda bike comes with front and rear hydraulic discs, enabling brilliant stopping power as well as excellent brake feel. You can be sure that things will stay simple, plus un-sprung weight is kept lower with the front 296 mm hydraulic disc and the 220mm rear hydraulic disk. Automotive Under-Seat Storage The under-seat storage is a excellent and a rider can put items such as gloves, map, and sunglasses right inside this lockable area once you lift the rear passenger seat. Separate Passenger Seat The Honda Motorcycle CB300F is passenger ready with the separate passenger seat feature. That's not all, the bike also includes standard passenger foot-pegs and an integrated grab rail, giving you the opportunity to ride with someone - this is another feature that confirms the CB300F's versatility. Automotive Affordable At $3999 retail, the 2015 Honda CB300F model is completely affordable, considering the tons of innovative features that have been loaded into this stylish bike. To crown it all, the bike comes with transferable 1-year limited warranty, plus unlimited mileage. And, the Honda Protection Plan provides extended coverage. Other innovative features of the CB300F include full LCD digital meter (multi-function), state-of-the-art exhaust system for enhanced performance and appearance. Also, the seat and side covers have been specially configured to promote easier reach to the ground. Automotive Bottom Line The 2015 Honda CB300F is worth every dime invested into it.

Article Source: http://ift.tt/1GB64Hr

Automotive ===> www1firstin.com

[ablalaouari]

Automotive The new 2015 Honda CB300F Model is here. This Honda Motorcycle comes in a great lightweight design. It's a nimble-handling naked motorcycle that provides tons of fun to both the experienced and newbie motorcyclists. With its 300-class engine, this new motorcycle model from Honda portrays a dash of attitude as well as independence, plus extensive credibility. So, whether you are zipping around town to catch fun, or commuting from place to place, the roomy ergonomics and the power-band of the Honda CB300F is designed to make each and every ride a fun ride. Automotive Features of the CB300F Honda Motorcycle Lightweight, Narrow and Low The single-cylinder machine of this fun-filled motorcycle makes it narrow. And, with the seat measuring 30.7-inch in height, this bike is low and feels light since it weighs only 348-pounds. All these promote easy ride and handling. Automotive Great Fuel Efficiency The CB300F Honda bike is highly rated at the gas pump in terms of fuel economy. Its fuel efficiency rating is approximately 71 miles per gallon. It is also a passenger-capable bike, and of course freeway legal. It is a complete package of style combined with fun. Automotive The Power of Single-Cylinder Engine The single-cylinder engine alongside fuel injection, plus a counter-balancer and double-overhead cams that come with the 2015 Honda CB300F provide a good number of real benefits. One of such great benefits is power delivery: the sort of torque and midrange power that a single offers is suitable for all levels of cyclists and riders. Automotive Counterbalance Shaft The CB300F Honda bike's counter-balancer feature makes the bike a smooth runner. You are simply combining narrow overall width as well as power benefits of a single with the effortlessness of a multi-cylinder motorcycle. Automotive Disc Brakes This stylish Honda bike comes with front and rear hydraulic discs, enabling brilliant stopping power as well as excellent brake feel. You can be sure that things will stay simple, plus un-sprung weight is kept lower with the front 296 mm hydraulic disc and the 220mm rear hydraulic disk. Automotive Under-Seat Storage The under-seat storage is a excellent and a rider can put items such as gloves, map, and sunglasses right inside this lockable area once you lift the rear passenger seat. Separate Passenger Seat The Honda Motorcycle CB300F is passenger ready with the separate passenger seat feature. That's not all, the bike also includes standard passenger foot-pegs and an integrated grab rail, giving you the opportunity to ride with someone - this is another feature that confirms the CB300F's versatility. Automotive Affordable At $3999 retail, the 2015 Honda CB300F model is completely affordable, considering the tons of innovative features that have been loaded into this stylish bike. To crown it all, the bike comes with transferable 1-year limited warranty, plus unlimited mileage. And, the Honda Protection Plan provides extended coverage. Other innovative features of the CB300F include full LCD digital meter (multi-function), state-of-the-art exhaust system for enhanced performance and appearance. Also, the seat and side covers have been specially configured to promote easier reach to the ground. Automotive Bottom Line The 2015 Honda CB300F is worth every dime invested into it.

Article Source: http://ift.tt/1GB64Hr

Automotive ===> www1firstin.com

[ablalaouari]

The 2015 Honda CB300F

Automotive The new 2015 Honda CB300F Model is here. This Honda Motorcycle comes in a great lightweight design. It's a nimble-handling naked motorcycle that provides tons of fun to both the experienced and newbie motorcyclists. With its 300-class engine, this new motorcycle model from Honda portrays a dash of attitude as well as independence, plus extensive credibility. So, whether you are zipping around town to catch fun, or commuting from place to place, the roomy ergonomics and the power-band of the Honda CB300F is designed to make each and every ride a fun ride. Automotive Features of the CB300F Honda Motorcycle Lightweight, Narrow and Low The single-cylinder machine of this fun-filled motorcycle makes it narrow. And, with the seat measuring 30.7-inch in height, this bike is low and feels light since it weighs only 348-pounds. All these promote easy ride and handling. Automotive Great Fuel Efficiency The CB300F Honda bike is highly rated at the gas pump in terms of fuel economy. Its fuel efficiency rating is approximately 71 miles per gallon. It is also a passenger-capable bike, and of course freeway legal. It is a complete package of style combined with fun. Automotive The Power of Single-Cylinder Engine The single-cylinder engine alongside fuel injection, plus a counter-balancer and double-overhead cams that come with the 2015 Honda CB300F provide a good number of real benefits. One of such great benefits is power delivery: the sort of torque and midrange power that a single offers is suitable for all levels of cyclists and riders. Automotive Counterbalance Shaft The CB300F Honda bike's counter-balancer feature makes the bike a smooth runner. You are simply combining narrow overall width as well as power benefits of a single with the effortlessness of a multi-cylinder motorcycle. Automotive Disc Brakes This stylish Honda bike comes with front and rear hydraulic discs, enabling brilliant stopping power as well as excellent brake feel. You can be sure that things will stay simple, plus un-sprung weight is kept lower with the front 296 mm hydraulic disc and the 220mm rear hydraulic disk. Automotive Under-Seat Storage The under-seat storage is a excellent and a rider can put items such as gloves, map, and sunglasses right inside this lockable area once you lift the rear passenger seat. Separate Passenger Seat The Honda Motorcycle CB300F is passenger ready with the separate passenger seat feature. That's not all, the bike also includes standard passenger foot-pegs and an integrated grab rail, giving you the opportunity to ride with someone - this is another feature that confirms the CB300F's versatility. Automotive Affordable At $3999 retail, the 2015 Honda CB300F model is completely affordable, considering the tons of innovative features that have been loaded into this stylish bike. To crown it all, the bike comes with transferable 1-year limited warranty, plus unlimited mileage. And, the Honda Protection Plan provides extended coverage. Other innovative features of the CB300F include full LCD digital meter (multi-function), state-of-the-art exhaust system for enhanced performance and appearance. Also, the seat and side covers have been specially configured to promote easier reach to the ground. Automotive Bottom Line The 2015 Honda CB300F is worth every dime invested into it.

Article Source: http://ift.tt/1GB64Hr

Automotive ===> www1firstin.com

The 2015 Honda CB300F Automotive from 1Firstin http://ift.tt/1Iy1x5S via IFTTT

[ablalaouari]

Classic Cars

Automotive

Several of the cars that have been used as the central character of a film or television show have already found their way into museums across the nation. Many of these gas-powered inventions have been so loved by visionary writers that they were even given names that identified them as special vehicles with extraordinary powers. The most famous fictional cars to appear in pop culture are Herbie, Kit, Gladys, Eleanor, and the Batmobile.

Automotive

Herbie of "The Love Bug"

Herbie was one of the first racers to come from the magic of film. As he raced to fame, Herbie could do wheelies, outrun the fastest sports cars, and help his driver find love. Awkwardly, the love he finds is the girlfriend of his racing buddy. Herbie appeared in several film and television spinoffs from the late 1960s through the early 2000s.

Automotive

Kitt of "Knight Rider"

Kitt was a marvelous machine equipped with the most advanced computer gadgets envisioned by the television industry. He was a sleek black car driven by Michael Knight and bound for heroic feats and derring-do. Together, the duo saved women, foiled bank robbers, and stopped a disaster that would have certainly ended the world. Kitt's on-board talking computer was famous for keeping Michael Knight in check. There was a very human quality about Kitt that rang true with his television audience.

Automotive

Gladys of "My Mother the Car"

Kitt was not the first talking car to visit homes through television. Many years ago, for a short period of time, Gladys was an older vehicle inhabited by the spirit of the dead mother of Jerry Van Dyke. Any one of the many automobile museums would have been far happier to have her grace their showrooms than her son was to have her parked in his garage. The car constantly argued with her son throughout the show's short run on television.

Automotive

Eleanor of "Gone in 60 Seconds"

From the jaunty jalopies that ushered in an era of fast cars to the daring young men that drove them, cars and their drivers have been the objects of legends as they sped their way to success in the film world. Eleanor ranks high within the muscle class category of collector's prizes. She's a beauty with a sleek frame and powerful engine. Before Nicholas Cage stole the iconic beauty in the movie "Gone in 60 Seconds," H.B. Halicki stole a different model with the same name in the 1974 original film.

Automotive

The Batmobile

This role has been performed by numerous cars in movies and on television. The original Batmobile has resurfaced every now and then in the news, and people have speculated on its whereabouts for decades. Many car aficionados have sought it out for their own collections, but for now it rotates between multiple automobile museums. It's not a particularly attractive car, and its speed is questionable, but it holds a nostalgic place in the hearts of television viewers who first saw the caped crusader drive it in the 1960s.

Automotive

Whether it's muscle cars or luxury sedans that catch your interest, great cars are on display all across the nation in automobile museums.

Automotive

Article Source: http://ift.tt/1IzMrQq

Automotive ===> www.1firstin.com

[ablalaouari]

Classic Cars

Automotive

Several of the cars that have been used as the central character of a film or television show have already found their way into museums across the nation. Many of these gas-powered inventions have been so loved by visionary writers that they were even given names that identified them as special vehicles with extraordinary powers. The most famous fictional cars to appear in pop culture are Herbie, Kit, Gladys, Eleanor, and the Batmobile.

Automotive

Herbie of "The Love Bug"

Herbie was one of the first racers to come from the magic of film. As he raced to fame, Herbie could do wheelies, outrun the fastest sports cars, and help his driver find love. Awkwardly, the love he finds is the girlfriend of his racing buddy. Herbie appeared in several film and television spinoffs from the late 1960s through the early 2000s.

Automotive

Kitt of "Knight Rider"

Kitt was a marvelous machine equipped with the most advanced computer gadgets envisioned by the television industry. He was a sleek black car driven by Michael Knight and bound for heroic feats and derring-do. Together, the duo saved women, foiled bank robbers, and stopped a disaster that would have certainly ended the world. Kitt's on-board talking computer was famous for keeping Michael Knight in check. There was a very human quality about Kitt that rang true with his television audience.

Automotive

Gladys of "My Mother the Car"

Kitt was not the first talking car to visit homes through television. Many years ago, for a short period of time, Gladys was an older vehicle inhabited by the spirit of the dead mother of Jerry Van Dyke. Any one of the many automobile museums would have been far happier to have her grace their showrooms than her son was to have her parked in his garage. The car constantly argued with her son throughout the show's short run on television.

Automotive

Eleanor of "Gone in 60 Seconds"

From the jaunty jalopies that ushered in an era of fast cars to the daring young men that drove them, cars and their drivers have been the objects of legends as they sped their way to success in the film world. Eleanor ranks high within the muscle class category of collector's prizes. She's a beauty with a sleek frame and powerful engine. Before Nicholas Cage stole the iconic beauty in the movie "Gone in 60 Seconds," H.B. Halicki stole a different model with the same name in the 1974 original film.

Automotive

The Batmobile

This role has been performed by numerous cars in movies and on television. The original Batmobile has resurfaced every now and then in the news, and people have speculated on its whereabouts for decades. Many car aficionados have sought it out for their own collections, but for now it rotates between multiple automobile museums. It's not a particularly attractive car, and its speed is questionable, but it holds a nostalgic place in the hearts of television viewers who first saw the caped crusader drive it in the 1960s.

Automotive

Whether it's muscle cars or luxury sedans that catch your interest, great cars are on display all across the nation in automobile museums.

Automotive

Article Source: http://ift.tt/1IzMrQq

Automotive ===> www.1firstin.com

[ablalaouari]

Classic Cars

Classic Cars

Automotive

Several of the cars that have been used as the central character of a film or television show have already found their way into museums across the nation. Many of these gas-powered inventions have been so loved by visionary writers that they were even given names that identified them as special vehicles with extraordinary powers. The most famous fictional cars to appear in pop culture are Herbie, Kit, Gladys, Eleanor, and the Batmobile.

Automotive

Herbie of "The Love Bug"

Herbie was one of the first racers to come from the magic of film. As he raced to fame, Herbie could do wheelies, outrun the fastest sports cars, and help his driver find love. Awkwardly, the love he finds is the girlfriend of his racing buddy. Herbie appeared in several film and television spinoffs from the late 1960s through the early 2000s.

Automotive

Kitt of "Knight Rider"

Kitt was a marvelous machine equipped with the most advanced computer gadgets envisioned by the television industry. He was a sleek black car driven by Michael Knight and bound for heroic feats and derring-do. Together, the duo saved women, foiled bank robbers, and stopped a disaster that would have certainly ended the world. Kitt's on-board talking computer was famous for keeping Michael Knight in check. There was a very human quality about Kitt that rang true with his television audience.

Automotive

Gladys of "My Mother the Car"

Kitt was not the first talking car to visit homes through television. Many years ago, for a short period of time, Gladys was an older vehicle inhabited by the spirit of the dead mother of Jerry Van Dyke. Any one of the many automobile museums would have been far happier to have her grace their showrooms than her son was to have her parked in his garage. The car constantly argued with her son throughout the show's short run on television.

Automotive

Eleanor of "Gone in 60 Seconds"

From the jaunty jalopies that ushered in an era of fast cars to the daring young men that drove them, cars and their drivers have been the objects of legends as they sped their way to success in the film world. Eleanor ranks high within the muscle class category of collector's prizes. She's a beauty with a sleek frame and powerful engine. Before Nicholas Cage stole the iconic beauty in the movie "Gone in 60 Seconds," H.B. Halicki stole a different model with the same name in the 1974 original film.

Automotive

The Batmobile

This role has been performed by numerous cars in movies and on television. The original Batmobile has resurfaced every now and then in the news, and people have speculated on its whereabouts for decades. Many car aficionados have sought it out for their own collections, but for now it rotates between multiple automobile museums. It's not a particularly attractive car, and its speed is questionable, but it holds a nostalgic place in the hearts of television viewers who first saw the caped crusader drive it in the 1960s.

Automotive

Whether it's muscle cars or luxury sedans that catch your interest, great cars are on display all across the nation in automobile museums.

Automotive

Article Source: http://ift.tt/1IzMrQq

Automotive ===> www.1firstin.com

Classic Cars Automotive from 1Firstin http://ift.tt/1IzMrQr via IFTTT

[ablalaouari]

Social Media

While someone can do things because they want to do them, they can also do things because they want approval. When this happens, one is going to be focused on what other people think of them.

If this is something that takes place from time to time, it might not have a negative effect on their life. Yet, if this is something that takes place on a regular basis, it is going to cause someone to disconnect from themselves.

Social Media

Point Of Focus

Their point of focus will be on others, and this can then set them up to overlook their own needs. However, all the time they have such a high need for approval, they are not going to be thinking about what is taking place within them..

During the moments when they get approval, they might be able to feel good about themselves. But no matter how good they feel, it might not be enough for them to experience a sense of fulfilment.

Social Media

Short Term Solution

When someone looks for approval from others, it is generally going to mean that they need to receive it all the time. It won't be enough for them to receive it on the odd occasions, and this is because it won't last.

Once they have received approval from others, they may find that it soon wears off. What this can show is that it is not possible for them to internalise the feedback that they are receiving from others.

Social Media

Playing a Role

One reason why it is not possible for them to internalise what they receive can be because they are playing a role. What this means is that their 'true self' is being covered up and their 'false self' has taken over.

Therefore, although one is receiving approval, it is not going to be for the person they are; it will be for the role they are playing. If one was able to let go off their need to play a role and was able to embrace their true self, their need for approval would diminish.

Social Media

Self-approval

When this happens, one will be their own best friend as opposed to their own worst enemy. And while their need for approval won't disappear, it won't end up controlling their life.

What this will show is that they are an interdependent human being and not a dependent human being. They will be able to approve of themselves as well as receive approval from others, and the approval they provide themselves will be what matters to them.

Social Media

True Self

There will be some people who always been in touch with their true self and then there will be others who have developed this connection as an adult. To get in touch with one's true self as an adult may have taken hard work and commitment.

Social Media

This could have been a time where they had to face the emotional pain that was within them, and this wouldn't have been easy. Yet, through grieving their unmet childhood needs and through being affirmed for who they are, they would have gradually been able to let go of their false self.

Social Media

Doing the Same Thing

However, even though some people will let go of their false self (and their compulsive need for approval at the same time), there will be others who will continue to act in the same ways. In the past, one would have been able to receive approval through what they did around others.

But this has all changed, and one no longer needs to be around others in order to receive approval. In today's world, the only thing someone needs to do in order to receive approval from others is to use social media.

Social Media

Signs of Approval

As a result of this, there is no need for them to go into the 'real world'; they simply need a device that supports social media. one can the share a picture, status, or a video, and see how many 'likes' or 'retweets' they get.

If what they share receives a certain amount of 'likes' or 'retweets', they may believe that other people approve of them. The feedback they have received from others has then given them permission to feel good about themselves.

Social Media

Caught Up

This can then set one up to be in a position where the responses they receive on social media define how they feel. If their 'friends' and 'followers' give them the feedback they desire, it is not going to be a problem

However, when they don't get the kind of responses they need to feel good about themselves, it is going to cause them to suffer. One's wellbeing is then in the hands of others, and they can end up being addicted to receiving positive responses from others.

Social Media

Two Experiences

The positive responses from others will allow them to feel good themselves, whereas, when they don't receive these responses they will feel bad about themselves. Based on this, it is easy to see why someone could end up in a position where they are addicted to receiving approval from people on social media.

When someone ends up being addicted to drugs, alcohol, or to working out, it is because of how they feel without these things. If they felt different to begin with, they wouldn't have the need to be addicted to them.

Social Media

Conclusion

What this shows is that while it would be easy to blame social media, it is also important to look into why someone would end up in the position they are in. For example, if someone doesn't accept themselves to begin with, it is going to be easier for them to be caught up in how other people respond to them on social media.

Social Media

In this sense, it could be said that social media is just another way for someone to avoid how they feel. If someone is unable to accept themselves, it might be important for them to seek external assistance.

Social Media

Prolific writer, thought leader and coach, Oliver JR Cooper hails from the United Kingdom. His insightful commentary and analysis covers all aspects of human transformation; love, partnership, self-love, and inner awareness. With over seven hundred in-depth articles highlighting human psychology and behavior, Oliver offers hope along with his sound advice. Current projects include "A Dialogue With The Heart" and "Communication Made Easy." Social Media

Article Source: http://ift.tt/1ImRSC9

Social Media ===> www.1firstin.com

[ablalaouari]

Social Media

While someone can do things because they want to do them, they can also do things because they want approval. When this happens, one is going to be focused on what other people think of them.

If this is something that takes place from time to time, it might not have a negative effect on their life. Yet, if this is something that takes place on a regular basis, it is going to cause someone to disconnect from themselves.

Social Media

Point Of Focus

Their point of focus will be on others, and this can then set them up to overlook their own needs. However, all the time they have such a high need for approval, they are not going to be thinking about what is taking place within them..

During the moments when they get approval, they might be able to feel good about themselves. But no matter how good they feel, it might not be enough for them to experience a sense of fulfilment.

Social Media

Short Term Solution

When someone looks for approval from others, it is generally going to mean that they need to receive it all the time. It won't be enough for them to receive it on the odd occasions, and this is because it won't last.

Once they have received approval from others, they may find that it soon wears off. What this can show is that it is not possible for them to internalise the feedback that they are receiving from others.

Social Media

Playing a Role

One reason why it is not possible for them to internalise what they receive can be because they are playing a role. What this means is that their 'true self' is being covered up and their 'false self' has taken over.

Therefore, although one is receiving approval, it is not going to be for the person they are; it will be for the role they are playing. If one was able to let go off their need to play a role and was able to embrace their true self, their need for approval would diminish.

Social Media

Self-approval

When this happens, one will be their own best friend as opposed to their own worst enemy. And while their need for approval won't disappear, it won't end up controlling their life.

What this will show is that they are an interdependent human being and not a dependent human being. They will be able to approve of themselves as well as receive approval from others, and the approval they provide themselves will be what matters to them.

Social Media

True Self

There will be some people who always been in touch with their true self and then there will be others who have developed this connection as an adult. To get in touch with one's true self as an adult may have taken hard work and commitment.

Social Media

This could have been a time where they had to face the emotional pain that was within them, and this wouldn't have been easy. Yet, through grieving their unmet childhood needs and through being affirmed for who they are, they would have gradually been able to let go of their false self.

Social Media

Doing the Same Thing

However, even though some people will let go of their false self (and their compulsive need for approval at the same time), there will be others who will continue to act in the same ways. In the past, one would have been able to receive approval through what they did around others.

But this has all changed, and one no longer needs to be around others in order to receive approval. In today's world, the only thing someone needs to do in order to receive approval from others is to use social media.

Social Media

Signs of Approval

As a result of this, there is no need for them to go into the 'real world'; they simply need a device that supports social media. one can the share a picture, status, or a video, and see how many 'likes' or 'retweets' they get.

If what they share receives a certain amount of 'likes' or 'retweets', they may believe that other people approve of them. The feedback they have received from others has then given them permission to feel good about themselves.

Social Media

Caught Up

This can then set one up to be in a position where the responses they receive on social media define how they feel. If their 'friends' and 'followers' give them the feedback they desire, it is not going to be a problem

However, when they don't get the kind of responses they need to feel good about themselves, it is going to cause them to suffer. One's wellbeing is then in the hands of others, and they can end up being addicted to receiving positive responses from others.

Social Media

Two Experiences

The positive responses from others will allow them to feel good themselves, whereas, when they don't receive these responses they will feel bad about themselves. Based on this, it is easy to see why someone could end up in a position where they are addicted to receiving approval from people on social media.

When someone ends up being addicted to drugs, alcohol, or to working out, it is because of how they feel without these things. If they felt different to begin with, they wouldn't have the need to be addicted to them.

Social Media

Conclusion

What this shows is that while it would be easy to blame social media, it is also important to look into why someone would end up in the position they are in. For example, if someone doesn't accept themselves to begin with, it is going to be easier for them to be caught up in how other people respond to them on social media.

Social Media

In this sense, it could be said that social media is just another way for someone to avoid how they feel. If someone is unable to accept themselves, it might be important for them to seek external assistance.

Social Media

Prolific writer, thought leader and coach, Oliver JR Cooper hails from the United Kingdom. His insightful commentary and analysis covers all aspects of human transformation; love, partnership, self-love, and inner awareness. With over seven hundred in-depth articles highlighting human psychology and behavior, Oliver offers hope along with his sound advice. Current projects include "A Dialogue With The Heart" and "Communication Made Easy." Social Media

Article Source: http://ift.tt/1ImRSC9

Social Media ===> www.1firstin.com

[ablalaouari]

Social Media

Social Media

While someone can do things because they want to do them, they can also do things because they want approval. When this happens, one is going to be focused on what other people think of them.

If this is something that takes place from time to time, it might not have a negative effect on their life. Yet, if this is something that takes place on a regular basis, it is going to cause someone to disconnect from themselves.

Social Media

Point Of Focus

Their point of focus will be on others, and this can then set them up to overlook their own needs. However, all the time they have such a high need for approval, they are not going to be thinking about what is taking place within them..

During the moments when they get approval, they might be able to feel good about themselves. But no matter how good they feel, it might not be enough for them to experience a sense of fulfilment.

Social Media

Short Term Solution

When someone looks for approval from others, it is generally going to mean that they need to receive it all the time. It won't be enough for them to receive it on the odd occasions, and this is because it won't last.

Once they have received approval from others, they may find that it soon wears off. What this can show is that it is not possible for them to internalise the feedback that they are receiving from others.

Social Media

Playing a Role

One reason why it is not possible for them to internalise what they receive can be because they are playing a role. What this means is that their 'true self' is being covered up and their 'false self' has taken over.

Therefore, although one is receiving approval, it is not going to be for the person they are; it will be for the role they are playing. If one was able to let go off their need to play a role and was able to embrace their true self, their need for approval would diminish.

Social Media

Self-approval

When this happens, one will be their own best friend as opposed to their own worst enemy. And while their need for approval won't disappear, it won't end up controlling their life.

What this will show is that they are an interdependent human being and not a dependent human being. They will be able to approve of themselves as well as receive approval from others, and the approval they provide themselves will be what matters to them.

Social Media

True Self

There will be some people who always been in touch with their true self and then there will be others who have developed this connection as an adult. To get in touch with one's true self as an adult may have taken hard work and commitment.

Social Media

This could have been a time where they had to face the emotional pain that was within them, and this wouldn't have been easy. Yet, through grieving their unmet childhood needs and through being affirmed for who they are, they would have gradually been able to let go of their false self.

Social Media

Doing the Same Thing

However, even though some people will let go of their false self (and their compulsive need for approval at the same time), there will be others who will continue to act in the same ways. In the past, one would have been able to receive approval through what they did around others.

But this has all changed, and one no longer needs to be around others in order to receive approval. In today's world, the only thing someone needs to do in order to receive approval from others is to use social media.

Social Media

Signs of Approval

As a result of this, there is no need for them to go into the 'real world'; they simply need a device that supports social media. one can the share a picture, status, or a video, and see how many 'likes' or 'retweets' they get.

If what they share receives a certain amount of 'likes' or 'retweets', they may believe that other people approve of them. The feedback they have received from others has then given them permission to feel good about themselves.

Social Media

Caught Up

This can then set one up to be in a position where the responses they receive on social media define how they feel. If their 'friends' and 'followers' give them the feedback they desire, it is not going to be a problem

However, when they don't get the kind of responses they need to feel good about themselves, it is going to cause them to suffer. One's wellbeing is then in the hands of others, and they can end up being addicted to receiving positive responses from others.

Social Media

Two Experiences

The positive responses from others will allow them to feel good themselves, whereas, when they don't receive these responses they will feel bad about themselves. Based on this, it is easy to see why someone could end up in a position where they are addicted to receiving approval from people on social media.

When someone ends up being addicted to drugs, alcohol, or to working out, it is because of how they feel without these things. If they felt different to begin with, they wouldn't have the need to be addicted to them.

Social Media

Conclusion

What this shows is that while it would be easy to blame social media, it is also important to look into why someone would end up in the position they are in. For example, if someone doesn't accept themselves to begin with, it is going to be easier for them to be caught up in how other people respond to them on social media.

Social Media

In this sense, it could be said that social media is just another way for someone to avoid how they feel. If someone is unable to accept themselves, it might be important for them to seek external assistance.

Social Media

Prolific writer, thought leader and coach, Oliver JR Cooper hails from the United Kingdom. His insightful commentary and analysis covers all aspects of human transformation; love, partnership, self-love, and inner awareness. With over seven hundred in-depth articles highlighting human psychology and behavior, Oliver offers hope along with his sound advice. Current projects include "A Dialogue With The Heart" and "Communication Made Easy." Social Media

Article Source: http://ift.tt/1ImRSC9

Social Media ===> www.1firstin.com

Social Media Social Media from 1Firstin http://ift.tt/1ImRPWZ via IFTTT

[ablalaouari]

Cancer

There are various tests that can be done to help diagnose a patient for leukemia. The following three methods are the most common:

1. Physical Examination - Often used to check for lumps, abnormalities, or certain leukemia symptoms that may be present in a patient. This examination will usually include a thorough revision of the patients medical history, family history, and any risk factors that may exist specific to the patient. After the examination has been completed, it is usual for blood testing to follow.

Cancer 

2. Blood Tests - Such as CBC (complete blood count) tests can detect leukemia by determining the number of both red and white blood cells, together with the platelets (the small, round, thin blood cells that help the blood to stop flowing from a cut by becoming thick and sticky), the number of red blood cells that make-up the blood sample, and the amount of hemoglobin that consists in the blood.

Cancer 

- A peripherial blood smear (a thin layer of blood [stained] smeared on a microscope slide which allows for the cells to be examined microscopically) to determine the presence of "blast cells," which will reveal both the type and quantity of white blood cells that exist, may also be used.

Cancer 

- A cytogenetic analysis of the blood may be used to check for any changes in the chromosomes of the lymphocytes, together with other blood tests to see how well the body's organs are functioning.

3. Biopsy - A fine needle is usually inserted into the hip or breast bone to remove either a sample of bone, or bone marrow for microscopic examination in a laboratory (bone marrow aspiration [most common]). The sample is usually examined by a pathologist for any signs of cancerous cells.

Cancer 

Other forms of biopsy may include:

(a) Lymph node biopsy - depending on the type of leukemia suspected (a lymph node is removed for examination by a pathologist).

(b) Lumbar Puncture/Spinal Tap - is where spinal fluid is removed from between the vertebrae in the spine, for examination by a pathologist.

Other procedures during the biopsy process may include:

CT Scans, X-rays, MRI's (Magnetic Resonance Imaging), and Ultra Sound Scans.

Cancer 

Article Source: http://ift.tt/1AGX2G5

Cancer ===> www.1firstin.com

[ablalaouari]

Cancer

There are various tests that can be done to help diagnose a patient for leukemia. The following three methods are the most common:

1. Physical Examination - Often used to check for lumps, abnormalities, or certain leukemia symptoms that may be present in a patient. This examination will usually include a thorough revision of the patients medical history, family history, and any risk factors that may exist specific to the patient. After the examination has been completed, it is usual for blood testing to follow.

Cancer 

2. Blood Tests - Such as CBC (complete blood count) tests can detect leukemia by determining the number of both red and white blood cells, together with the platelets (the small, round, thin blood cells that help the blood to stop flowing from a cut by becoming thick and sticky), the number of red blood cells that make-up the blood sample, and the amount of hemoglobin that consists in the blood.

Cancer 

- A peripherial blood smear (a thin layer of blood [stained] smeared on a microscope slide which allows for the cells to be examined microscopically) to determine the presence of "blast cells," which will reveal both the type and quantity of white blood cells that exist, may also be used.

Cancer 

- A cytogenetic analysis of the blood may be used to check for any changes in the chromosomes of the lymphocytes, together with other blood tests to see how well the body's organs are functioning.

3. Biopsy - A fine needle is usually inserted into the hip or breast bone to remove either a sample of bone, or bone marrow for microscopic examination in a laboratory (bone marrow aspiration [most common]). The sample is usually examined by a pathologist for any signs of cancerous cells.

Cancer 

Other forms of biopsy may include:

(a) Lymph node biopsy - depending on the type of leukemia suspected (a lymph node is removed for examination by a pathologist).

(b) Lumbar Puncture/Spinal Tap - is where spinal fluid is removed from between the vertebrae in the spine, for examination by a pathologist.

Other procedures during the biopsy process may include:

CT Scans, X-rays, MRI's (Magnetic Resonance Imaging), and Ultra Sound Scans.

Cancer 

Article Source: http://ift.tt/1AGX2G5

Cancer ===> www.1firstin.com

[ablalaouari]

How Leukemia Is Diagnosed

Cancer

There are various tests that can be done to help diagnose a patient for leukemia. The following three methods are the most common:

1. Physical Examination - Often used to check for lumps, abnormalities, or certain leukemia symptoms that may be present in a patient. This examination will usually include a thorough revision of the patients medical history, family history, and any risk factors that may exist specific to the patient. After the examination has been completed, it is usual for blood testing to follow.

Cancer 

2. Blood Tests - Such as CBC (complete blood count) tests can detect leukemia by determining the number of both red and white blood cells, together with the platelets (the small, round, thin blood cells that help the blood to stop flowing from a cut by becoming thick and sticky), the number of red blood cells that make-up the blood sample, and the amount of hemoglobin that consists in the blood.

Cancer 

- A peripherial blood smear (a thin layer of blood [stained] smeared on a microscope slide which allows for the cells to be examined microscopically) to determine the presence of "blast cells," which will reveal both the type and quantity of white blood cells that exist, may also be used.

Cancer 

- A cytogenetic analysis of the blood may be used to check for any changes in the chromosomes of the lymphocytes, together with other blood tests to see how well the body's organs are functioning.

3. Biopsy - A fine needle is usually inserted into the hip or breast bone to remove either a sample of bone, or bone marrow for microscopic examination in a laboratory (bone marrow aspiration [most common]). The sample is usually examined by a pathologist for any signs of cancerous cells.

Cancer 

Other forms of biopsy may include:

(a) Lymph node biopsy - depending on the type of leukemia suspected (a lymph node is removed for examination by a pathologist).

(b) Lumbar Puncture/Spinal Tap - is where spinal fluid is removed from between the vertebrae in the spine, for examination by a pathologist.

Other procedures during the biopsy process may include:

CT Scans, X-rays, MRI's (Magnetic Resonance Imaging), and Ultra Sound Scans.

Cancer 

Article Source: http://ift.tt/1AGX2G5

Cancer ===> www.1firstin.com

How Leukemia Is Diagnosed Cancer from 1Firstin http://ift.tt/1M1IAK9 via IFTTT

[ablalaouari]

Kids and Teens

When the author flew to Ghana in February 1971, to take up a teaching post at the University of Science and Technology, Kumasi, his three sons were 9 years, 6 years and 3 months old. As the years passed, one by one the boys left to attend boarding school in England and the father took to writing each a letter every Sunday morning.

Kids and Teens

As often as possible, he tried to send a story with the letter and these proved popular not only with his sons but with their school mates. When the stories were sent recorded on tape, the tapes were misappropriated. Other parents urged the publication of the stories but the effort was postponed because suitable illustrations were not available. Now that grandchildren have read the stories, they are to be published in the hope that their children and many others will also enjoy them.

Kids and Teens

The true origin of the stories must be traced back to long car journeys in England in the 1960s, when they were related in answer to the plea 'tell us a story.' So the characters were well known to the boys before they read about them at boarding school. The boys spent long summer holidays in Kumasi and were friends with the children of other lecturers and professors. Inevitably, the stories were shared and came to the attention of other parents. One father, employed in the Faculty of Architecture, pressed for the publication of the stories and offered to provide the illustrations. The offer was accepted but the pictures never materialised.

Kids and Teens

This scenario was repeated over the following years. Sadly, one would-be illustrator passed away before the task could be accomplished. After this disappointment the drafts languished for three decades. They were lucky to survive, having been composed on a portable typewriter, long before the days of word processors or personal computers. Their revival was prompted by the demands of grandchildren, alerted to the possibility by their fathers.

Kids and Teens

One grandson produced a few sketches of the characters in the stories and once again the issue of publication arose. So the old yellowing pages with faint grey type were painfully retyped into a Word file in preparation for sending to a publisher. In this exercise it was realised that in the forty years or more since the stories were originally composed much had happened to change perception and understanding.

Kids and Teens

A hidden agenda had always been to help extent the knowledge and vocabulary of the youthful reader. To ensure the continuing pursuit of this end some updating was needed, so an extended period or rewriting then ensued.

Kids and Teens

The matter of suitable illustrations was not resolved before the task was taken up by a publisher. There was some delay in finding an illustrator with the right style, and even after one was selected there remained a few problems with some characters and locations. The process of final adjustment was aided by some sketches executed by a granddaughter. So what began as a family-centred task ended the same way. After gestating for more than two generations the stories are now set to meet new families and a new generation of readers.

Kids and Teens

Article Source: http://ift.tt/1GeeB2F

Kids and Teens ===> www.1firstin.com

[ablalaouari]

Kids and Teens

When the author flew to Ghana in February 1971, to take up a teaching post at the University of Science and Technology, Kumasi, his three sons were 9 years, 6 years and 3 months old. As the years passed, one by one the boys left to attend boarding school in England and the father took to writing each a letter every Sunday morning.

Kids and Teens

As often as possible, he tried to send a story with the letter and these proved popular not only with his sons but with their school mates. When the stories were sent recorded on tape, the tapes were misappropriated. Other parents urged the publication of the stories but the effort was postponed because suitable illustrations were not available. Now that grandchildren have read the stories, they are to be published in the hope that their children and many others will also enjoy them.

Kids and Teens

The true origin of the stories must be traced back to long car journeys in England in the 1960s, when they were related in answer to the plea 'tell us a story.' So the characters were well known to the boys before they read about them at boarding school. The boys spent long summer holidays in Kumasi and were friends with the children of other lecturers and professors. Inevitably, the stories were shared and came to the attention of other parents. One father, employed in the Faculty of Architecture, pressed for the publication of the stories and offered to provide the illustrations. The offer was accepted but the pictures never materialised.

Kids and Teens

This scenario was repeated over the following years. Sadly, one would-be illustrator passed away before the task could be accomplished. After this disappointment the drafts languished for three decades. They were lucky to survive, having been composed on a portable typewriter, long before the days of word processors or personal computers. Their revival was prompted by the demands of grandchildren, alerted to the possibility by their fathers.

Kids and Teens

One grandson produced a few sketches of the characters in the stories and once again the issue of publication arose. So the old yellowing pages with faint grey type were painfully retyped into a Word file in preparation for sending to a publisher. In this exercise it was realised that in the forty years or more since the stories were originally composed much had happened to change perception and understanding.

Kids and Teens

A hidden agenda had always been to help extent the knowledge and vocabulary of the youthful reader. To ensure the continuing pursuit of this end some updating was needed, so an extended period or rewriting then ensued.

Kids and Teens

The matter of suitable illustrations was not resolved before the task was taken up by a publisher. There was some delay in finding an illustrator with the right style, and even after one was selected there remained a few problems with some characters and locations. The process of final adjustment was aided by some sketches executed by a granddaughter. So what began as a family-centred task ended the same way. After gestating for more than two generations the stories are now set to meet new families and a new generation of readers.

Kids and Teens

Article Source: http://ift.tt/1GeeB2F

Kids and Teens ===> www.1firstin.com