Bespoke Juxtaposition

Documentation for recording physical experimentation and research of developing Spatial installation based on my developed design methodology.

[bespokejuxtaposition]

[bespokejuxtaposition]

Making the bottom boxes for creating levels like site for the MA Show.

[bespokejuxtaposition]

Making the bottom boxes for creating levels like site for the MA Show.

[bespokejuxtaposition]

Final built on site part 2

[bespokejuxtaposition]

Final built on site.

[bespokejuxtaposition]

Site build part 3

[bespokejuxtaposition]

Site build part 2

[bespokejuxtaposition]

Site build part 1

[bespokejuxtaposition]

Sanding the bottom of dowels to fit tight in the bespoke connectors.

[bespokejuxtaposition]

SITE BUILT All the members were marked and grouped together making it easy and quick to built.

[bespokejuxtaposition]

Base for the bespoke connectors for the MA show. To install it for MA show, the base connectors needs to sit on the replica of the site. The base is 3D printed and trying some contrasting colour options to highlight the bespoke.

[bespokejuxtaposition]

Elevation test

Assembling bottom part of the structure for confirming the elevation difference between the points.

[bespokejuxtaposition]

Fabric stitching lessons for the deck chair like seating.

[bespokejuxtaposition]

Test built of the lower part of the structure.

[bespokejuxtaposition]

Taking material to site for confirming the levels of the landing points. 14km travel :-/

[bespokejuxtaposition]

Preparation before going to site. Setting up the dowels into the connectors as per the heights obtained from the survey.

[bespokejuxtaposition]

Cutting the dowels and naming them on edges.