CaryMart: wireless remote control system @carymart350 - Tumblr Blog

DC wireless remote controller of connecting 4 appliances

We introduce the wireless remote control equipment. It is model: S4UB-DC12 & CV-8. The receiver (S4UB-DC12) has 4 relays and can connect 4 DC appliances. The transmitter (CV-8) can remote control the appliances on/off within 500m/1500ft theoretically. The wireless equipment remote control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V. For example, you can connect 4 DC lamps to receiver.

Here is the circuit diagram of receiver. You can connect 4 DC lamps to B terminal of 4 relays in the receiver. Then supply power DC 12V to receiver by connecting wires to positive pole and negative pole. When you press 8 buttons of transmitter, the lamps will turn on/off by wireless remote control.

The wireless remote control equipment has four control modes: toggle, momentary, latched, momentary+toggle. You can choose any one of four modes. We set toggle mode here.

The button 1,2,3,4 of transmitter remote control receiver 1 ; the button 5,6,7,8 of transmitter remote control receiver 2.

Press button 1: Turn on lamp 1 of receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off lamp 1 of receiver 1 (disconnect B and C, connect A and B)

Press button 2: Turn on lamp 2 of receiver 1 (connect B and C, disconnect A and B)

Press button 2 again: Turn off lamp 2 of receiver 1 (disconnect B and C, connect A and B)

Press button 3: Turn on lamp 3 of receiver 1 (connect B and C, disconnect A and B)

Press button 3 again: Turn off lamp 3 of receiver 1 (disconnect B and C, connect A and B)

Press button 4: Turn on lamp 4 of receiver 1 (connect B and C, disconnect A and B)

Press button 4 again: Turn off lamp 4 of receiver 1 (disconnect B and C, connect A and B)

Press button 5: Turn on lamp 5 of receiver 2 (connect B and C, disconnect A and B)

Press button 5 again: Turn off lamp 5 of receiver 2 (disconnect B and C, connect A and B)

Press button 6: Turn on lamp 6 of receiver 2 (connect B and C, disconnect A and B)

Press button 6 again: Turn off lamp 6 of receiver 2 (disconnect B and C, connect A and B)

Press button 7: Turn on lamp 7 of receiver 2 (connect B and C, disconnect A and B)

Press button 7 again: Turn off lamp 7 of receiver 2 (disconnect B and C, connect A and B)

Press button 8: Turn on lamp 8 of receiver 2 (connect B and C, disconnect A and B)

Press button 8 again: Turn off lamp 8 of receiver 2 (disconnect B and C, connect A and B)

Of course, you can also operate by using other control modes according to the product’s instruction in our website.

Finally you can enter into the website and search the wireless remote control equipment as following:

Model: 0020386 (S4UB-DC12 & CV-8)

Website:

http://www.carymart.com/10a-dc-9v12v24v-8ch-rf-remote-controller-home-lighting-control- p-1370.html

http://www.ourautomation.com/10a-dc-9v12v24v-8ch-rf-remote-controller-home-lighting-control-p-1370.html

#0020386 (S4UB-DC12 & CV-8) Remote control 4 DC lamps

Wireless remote control 4 DC 12V motors within 2000m/6000ft

We recommend the wireless device of long range remote control motor. It is model: S4C-DC12-ANT2 & CB-4L. The receiver (S4C-DC12-ANT2) has 4 relays and can connect 4 DC appliances. The transmitter (CB-4L) can remote control the appliances on/off within 2000m/6000ft theoretically because of the external extend antenna in the receiver. Besides, the wireless device remote control lights, motors, fans, electrically operated doors/ locks/ windows/ blinds/cars or other appliances with AC110~240V or DC0~28V. For example, you can connect 4 DC motors to receiver.

Here is the circuit diagram of receiver. You can connect 4 DC motors to C terminal of relays in the receiver. Then supply power DC 12V to receiver by connecting wires to positive pole and negative pole. You press one button of transmitter, one of four motors will turn on/off by wireless remote control.

The wireless remote control device has four control modes: toggle, momentary, latched, momentary+toggle. You can choose any one of four control modes. We introduce momentary control mode here.

You only connect Jumper-1, it is momentary control mode.

Press and hold button A: Turn on motor 1 (connect B and C, disconnect A and B)

Release button A: Turn off motor 1 (disconnect B and C, connect A and B)

Press and hold button B: Turn on motor 2 (connect B and C, disconnect A and B)

Release button B: Turn off motor 2 (disconnect B and C, connect A and B)

Press and hold button C: Turn on motor 3 (connect B and C, disconnect A and B)

Release button C: Turn off motor 3 (disconnect B and C, connect A and B)

Press and hold button D: Turn on motor 4 (connect B and C, disconnect A and B)

Release button D: Turn off motor 4 (disconnect B and C, connect A and B)

Of course, you can also set other control modes according to the product’s instruction in our website.

Finally you can enter into the website and search the wireless remote control device as following:

Model: 0020510 (S4C-DC12-ANT2 & CB-4L)

Website:

http://www.carymart.com/4ch-2000m-5a-dc-long-distance-rf-remote-control-receiver-transmitter-learning-code-p-1537.html

http://www.ourautomation.com/4ch-2000m-5a-dc-long-distance-rf-remote-control-receiver-transmitter-learning-code-p-1537.html

#0020510 (S4C-DC12-ANT2 & CB-4L)#Remote control 4 DC motors

Turn on/off 4 AC lights by wireless long range remote control kit

We introduce the wireless kit for long range remote control 4 AC lights. It is model: S4X-AC220-ANT2 & CB-4L. The receiver (S4X-AC220-ANT2) has 4 relays and can connect 4 AC appliances. The transmitter (CB-4L) can long range remote control appliances on/off. The wireless kit remote control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage of AC 100~240V. For example, you can connect 4 AC lights to receiver and use wireless transmitter remote control lights on/off.

Here is the circuit diagram of receiver. You can connect 4 AC lights to “A & B” terminal of relays in the receiver. Then supply power AC 100~240V to receiver by connecting wires to “L & N” terminal. You press one button of transmitter, one of four lights will turn on/off by wireless remote control.

The wireless remote control kit has four control modes: toggle, momentary, latched, momentary+toggle. We introduce toggle control mode here. You can operate as the process.

You only connect Jumper-2 in the receiver, it is toggle mode.

Press button A: Turn on light 1, terminal OUT 1 (A&B) outputs AC power.

Press button A again: Turn off light 1, terminal OUT 1 no output.

Press button B: Turn on light 2, terminal OUT 2 (A&B) outputs AC power.

Press button B again: Turn off light 2, terminal OUT 2 no output.

Press button C: Turn on light 3, terminal OUT 3 (A&B) outputs AC power.

Press button C again: Turn off light 3, terminal OUT 3 no output.

Press button D: Turn on light 4, terminal OUT 4 (A&B) outputs AC power.

Press button D again: Turn off light 4, terminal OUT 4 no output.

You can also set other control mode according to the product’s instruction in our website.

Finally you can enter into the website and search the wireless long range remote control kit as following:

Model: 0020222 (S4X-AC220-ANT2 & CB-4L)

Website:

http://www.carymart.com/2000m-long-range-4ch-110v-or-220v-ac-power-output-remote-control-kit-learning-code-p-1597.html

http://www.ourautomation.com/2000m-long-range-4ch-110v-or-220v-ac-power-output-remote-control-kit-learning-code-p-1597.html

#0020222 (S4X-AC220-ANT2 & CB-4L) long range remote control 4 AC lamps

How to long range remote control one AC motor?

The wireless facility is suitable for long range remote control one AC motor. It is model: S1U-AC220-ANT2 & CB-2L. The receiver (S1U-AC220-ANT2) can connect one AC appliance and has external extend antenna for long range control. The transmitter (CB-2L) can remote control receiver within 2000m/6000ft theoretically. The wireless facility remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC 110~240V or DC 0~28V. For example, you can connect one AC motor to receiver and use the wireless transmitter to remote control motor rotation.

Here is the circuit diagram for remote control one AC motor. You can connect one AC motor to B terminal of receiver. Then supply AC power to receiver by connecting live wire to L terminal and zero wire to N terminal. Besides, you should connect wire between ‘B & C” terminal and power supply. When you press the button of transmitter, the motor will rotate by wireless remote control.

The wireless remote control facility has three control modes: toggle, momentary, latched. You can choose any one of three modes. We introduce the operation process here:

You only connect Jumper-2, it is toggle mode.

Press big button: Turn on motor (connect B and C, disconnect A and B)

Press big button again: Turn off motor (disconnect B and C, connect A and B)

You only connect Jumper-1, it is momentary mode.

Press and hold big button: Turn on motor (connect B and C, disconnect A and B)

Release big button: Turn off the motor (disconnect B and C, connect A and B)

You don’t connect Jumper-1 and Jumper-2, it is latched mode.

Press big button: Turn on motor (connect B and C, disconnect A and B)

Press small button: Turn off motor (disconnect B and C, connect A and B)

Finally you can also enter into the website and search the wireless remote control facility as following:

Model: 0020505 (S1U-AC220-ANT2 & CB-2L)

Website:

http://www.carymart.com/1ch-2000m-ac-110v-220v-long-range-rf-remote-control-receiver-transmitter-learning-code-p-1532.html

http://www.ourautomation.com/1ch-2000m-ac-110v-220v-long-range-rf-remote-control-receiver-transmitter-learning-code-p-1532.html

#0020505 (S1U-AC220-ANT2 & CB-2L)#long range remote control AC motor

Remote control 3 receivers with external extend antenna by wireless 12 CH transmitter

We recommend the 12 CH transmitter long range remote control 3 receivers here. It is model: 3S4UB-AC220-ANT2 & CB-12. The wireless remote control device includes one transmitter (CB-12) and three receivers (3S4UB-AC220-ANT2). The transmitter has 12 buttons and can remote control 3 receivers within 2000m/6000ft theoretically at the same time. The each receiver can connect four appliances. So the transmitter will control appliances on/off. The wireless device remote control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. For example, you can connect four lamps to each receiver and use the transmitter to remote control lamps on/off.

Here is the circuit diagram of receiver. You can connect four lamps to B terminal of relays in the receiver. Then supply power to receiver by connecting wires to “L&N” terminal. You press the buttons of transmitter and the lamps will turn on/off by wireless remote control.

The wireless remote control device has four control modes: toggle, momentary, latched, momentary+toggle. You can choose any one of four control modes. We set toggle mode here. You can operate as the process:

The button 1,2,3,4 remote control receiver 1; button 5,6,7,8 remote control receiver 2; button 9,10,11,12 remote control receiver 3.