CBX-LALALA

I am the owner of a Honda motorcycle [CBX] who lives in Hiroshima City, Japan. I am posting about FCR carburetor and CBX customization. I also post about things other than cars and motorcycles. We will post information that will make bikers around the world happy.

[cbx-lalala]

Hiroshima Prefecture – Roadside Station Spa Rakan – CB-F Mini Meeting

One of the touring spots in Hiroshima Prefecture, it's a popular stop for riders coming from Yamaguchi and Shimane Prefectures. Geo

[cbx-lalala]

Photo of a CBX1000 – taken at Bayside Beach, Hiroshima Prefecture, on 2021-01-10.

I took some photos of my CBX1000 right after it was renewed. In these photos, the brake system has been upgraded from the standard setup to

[cbx-lalala]

Replace the headlight bulb with an LED and switch the headlight to a multi-reflector.

I have installed an LED headlight and a multi-reflector on my CBX1000. Currently, in Japan, yellow lights and headlight on/off switches are

[cbx-lalala]

Installing the CB1100F front-end assembly on the CBX1000

My CBX1000 is a CB1 model. The modification applies to the twin-shock version of the CBX1000, specifically the CB1 and SC03 models. I will b

[cbx-lalala]

I had the head cover chrome plated.

The CBX1000 comes in three model variations. The shape of the head cover may vary slightly, which means it might require some trimming to fi

[cbx-lalala]

Rebuilt Turn Signals – CBX1000

I purchased rebuilt turn signals for my CBX1000. They are new, but I sent them out for painting right away. The CBX1000 has large, round tur

[cbx-lalala]

Leather Jacket – Vanson – One Star

Since I was young, I’ve dreamed of riding a Kawasaki motorcycle while wearing a Simpson helmet and a Vanson One Star jacket. As the internet

[cbx-lalala]

I remove the fuel tank and clean the motorcycle.

I removed and reinstalled the carburetor during the tuning process. Along with that, I also cleaned the motorcycle. There are mainly four th

[cbx-lalala]

Helmet Sales in Japan – SIMPSON – Blue Star

The SIMPSON-RX10-BLUE STAR is a helmet released as a limited edition by the Japanese distributor NORIX. It features an American star design

[cbx-lalala]

Does the scope of the FCR tuning manual affect the throttle opening or the valve opening?

This is regarding the scope presented on page 8 of the FCR tuning manual. This page indicates the impact range of tuning, but it raises the

[cbx-lalala]

Clutch plate replacement for the CBX1000.

The size of the collar for the earlier model is 45mm, while the size for the later model is 43.6mm. The springs have slight differences betw

[cbx-lalala]

My impression of changing the CBX1000’s clutch housing to the later model(SC06).

I will write about the clutch housing that I replaced during the winter maintenance of my CBX1000. This is about changing the clutch housing

[cbx-lalala]

re the standard brakes of classic motorcycles low in performance? I customized my brakes.

Comparison of brakes from the past and present: Even when comparing a CBX1000 equipped with a recently manufactured complete brake system to

[cbx-lalala]

FCR Tuning – Should the Slow Jet Be Changed According to the Season?

Tuning the FCR requires adjustments based on the weight of air and fuel. As the temperature drops, the density of the air increases, making

[cbx-lalala]

FCR Tuning – To What Extent Should Carburetor Synchronization Be Done?

How Far Should Carburetor Synchronization Be Done?When performing synchronization using a vacuum gauge, there are graduations to consider.Is

[cbx-lalala]

With the FCR, you can start the engine even on early winter mornings.

I will write about starting the engine of a motorcycle with a carburetor in the early winter mornings. Logically speaking, the Honda Cub, wh

[cbx-lalala]

For FCR Beginners – Don’t use the red Velocity Stack on the street as it is!

When you purchase an FCR, it comes with a red Velocity Stack. It’s a 30mm red plastic Velocity Stack. The Velocity Stack of the FCR can be c